Kohler K-352-CP- Installation Manual
Kohler K-352-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Pencil
- Page 3 – Prepare the Handshower Bracket; Install the Anchors; Nail; Install the Anchor
- Page 4 – Install the Handshower Holder
- Page 5 – Guide d’installation; Outils et matériels; Chiffons
- Page 6 – Clou; Installer les dispositifs d'ancrage
- Page 7 – Installer le support de la douchette; Corps
- Page 8 – Guía de instalación; Soporte; Herramientas y materiales; Nivel
- Page 9 – Prepare el soporte de la ducha de mano; Instale los anclajes; Instale el anclaje; Clavo
- Page 10 – Instale el soporte portador de la ducha de mano; Para todos los modelos:; Cuerpo
Installation Guide
Adjustable Wall-Mount Handshower Holder
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-352
K-422
K-975
K-10599
1045302-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and website are listed ...
1. Prepare the Handshower Bracket NOTE: This accessory should not be installed in the area 24 ″ (61 cm) to 48 ″ (121.9 cm) from the floor (the critical support area as defined in ASTM F446). Position the bracket on the finished wall, and mark the top andbottom hole locations. Drill a 3/16 ″ hole thr...
3. Install the Handshower Holder For all models: Secure the bracket to the wall with the screws provided. Apply clear silicone sealant to the back of the escutcheon on thebody of the handshower holder. Allow the silicone sealant to setaccording to the sealant manufacturer’s instructions. For K-352, ...
