Kohler K-1663-G- Installation Manual
Kohler K-1663-G– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Install the Steam Head
- Page 5 – Install the Steam Control
- Page 6 – Operate the Steam Control; Troubleshooting Guide
- Page 8 – Guide d’installation; Kit de contrôle de vapeur; Outils et matériels
- Page 11 – Installer la tête de vapeur
- Page 12 – Installer le contrôle de vapeur
- Page 13 – Opérer le contrôle de vapeur; Guide de dépannage
- Page 15 – Guía de instalación; Kit de control de vapor; Herramientas y materiales
- Page 18 – Instale el cabezal de vapor
- Page 19 – Instale el control de vapor
- Page 20 – Haga funcionar el control de vapor
- Page 21 – Guía para resolver problemas
Installation Guide
Steam Control Kit
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México
(Ej. K-12345
M
)
Français, page
″
Français-1
″
Español, página
″
Español-1
″
K-1663
1008020-2-E
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2. Install the Steam Head WARNING: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head is hot during operation and may scald the user if touched. NOTICE: Do not obstruct the steam head with shut-off valves, plugs, or caps. NOTE: The steam housing can be adjusted fo...
3. Install the Steam Control NOTICE: Do not locate the control kit directly above the steam outlet. Make sure that the power is turned off at the main breaker panel before proceeding. Locate the control pad on the wall 60 ″ (152.4 cm) up from the floor. At the selected location, drill a hole 1-1/4 ″...
4. Operate the Steam Control Steam Control Operation NOTE: The clock is always displayed in the LED window when the steam is not in use. NOTE: The next time the unit is turned on, the steam duration and temperature settings will be based upon the previous user settings. The default setting for a new...
