Kohler K-16268-CP- Installation Manual
Kohler K-16268-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Install the Mounting Plate; To avoid possible; Wires
- Page 4 – Connect the Electrical Wires; Ground; Bare; Outlet
- Page 5 – Complete the Installation; Insert the bulb into the fixture.; Socket Cup
- Page 6 – Guide d’installation; Chandelier; Outils et matériels; Afin d’éviter un; Afin d’éviter un; AVERTISSEMENT : Risque d’endommagement du matériel.
- Page 8 – Installer la plaque de fixation; Câbles
- Page 9 – Connecter les câbles électriques; Terre; Nu; Sortie
- Page 11 – Compléter l’installation; Insérer la lampe dans l’appareil.; Mur fini
- Page 12 – Guía de instalación; Lámpara de pared; Herramientas y materiales; Para evitar una; ADVERTENCIA: Riesgo de daños a la propiedad.; Para
- Page 14 – Instale la placa de montaje; Cables
- Page 15 – Conecte los cables eléctricos; Tierra; Desnudo
- Page 16 – Termine la instalación; Inserte el foco en la unidad.
Installation Guide
Wall Sconce
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-16268
1065083-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Install the Mounting Plate DANGER: Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at thecircuit breaker or fuse box before attempting any installationprocedure. Carefully pull the wiring out from the outlet box and allow thewires to hang down. Plac...
2. Connect the Electrical Wires DANGER: Risk of personal injury. To avoid possible electrical shock, the outlet box must be properly grounded. Attach the bare copper ground wire from the fixture to theground wire (green or bare wire) of the outlet box. Fasten the ground wires together with a plastic...
3. Complete the Installation Secure the fixture to the mounting plate with the mountingscrews and mounting knobs. The fixture should be flush againstthe finished wall. Insert the bulb into the fixture. Position the glass shade on the socket cup. Hand tighten the diffuser knob. Turn on the main elect...
