Kohler K-16137-4-BV- Installation Manual
Kohler K-16137-4-BV– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
105833-2-
AA
(A)
Copyright
1998 Kohler Co.
VACUUM BREAKER
BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will aid you in avoiding the
unnecessary expense associated with improper
installation.
In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based on the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time
without notice.
NOTES
Review all local plumbing and building codes.
Bottom of vacuum breaker must be positioned at
least 6” above fixture rim. Local codes may differ.
Piping should run downward, regardless of rough-in
height.
**Variation and/or finish/color code may be required
when ordering.
CAUTION: Risk of product damage. Do not
subject vacuum breaker to continuous pressure for
more than 12 hours.
TOOLS AND MATERIALS REQUIRED
Seat wrench (Kohler #21261) or 7/16” square bar
Hex head wrench, 5/32”
Thread sealant
ROUGHING-IN
Fig. #1
3-3/8”
3-7/8”
4-1/4”
3/8”
1”
1”
1-3/8”
FINISHED
WALL
3/8”
7/8”
2” D.
1/2” I.P.S. OUTLET
1/2” I.P.S. INLET
Rough-in inlet and outlet piping using Fig. #1.
NOTE: Locate outlet piping at the top and inlet piping at
the bottom.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
