Kohler K-15136-S-PB- Installation Manual
Kohler K-15136-S-PB– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – • Emery Paper
- Page 3 – Install the Threaded Spout; Standard Length Spouts; Threaded Spouts; Large Spouts
- Page 4 – Do not overtighten the setscrew.
- Page 5 – Guide d’installation; Becs de baignoire; Outils et matériaux; Clés à molette
- Page 6 – Installer le bec fileté; Becs standards; Bec filetés; Becs larges
- Page 7 – Installer le bec à ajustement glissant; Ne pas serrer la vis de retenue excessivement.; Becs à montage tournant
- Page 8 – Guía de instalación; Surtidores de bañera; Herramientas y materiales; • Papel lija
- Page 9 – Instale el surtidor roscado; Surtidores de tamaño estándar; Surtidores roscados; Niple
- Page 10 – Instale el surtidor deslizante; No apriete demasiado el tornillo de; Surtidores de montaje deslizante
Installation Guide
Bath Spouts
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page“ Français-1”
Español, página“ Español-1”
K-15135
K-15136
K-15137
K-15138
1011610-2-C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin Observe all local plumbing and building codes. Shut off the main water supply. 1. Prepare the Site IMPORTANT! Secure the piping to the framing. Install or relocate the water supplies as necessary. NOTE: A typical bath and shower installation uses 1/2 ″ copper tub...
2. Install the Threaded Spout NOTE: The following instructions are for threaded spout installations only. For slip-fit spout installations, proceed to the nextsection. Remove the temporary nipple. If you are installing the standard spout, apply thread sealant andinstall a 1/2 ″ NPT nipple, extending...
3. Install the Slip-Fit Spout NOTE: The following instructions are for slip-fit spout installations only. For threaded spout installations, go to the preceding section. Remove the temporary nipple from the bath elbow. Use emery paper to remove any burrs and to smooth the edge ofthe copper tubing. Lo...
