Kohler K-13774-CP- Installation Manual
Kohler K-13774-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Adjustable Wrench
- Page 3 – Before You Begin
- Page 4 – Faucet Installation; Hex Nut
- Page 5 – Guide de l’installation; Robinet de lavabo à cou rallongé; Outils et matériaux; Clé à molette
- Page 6 – Avant de commencer
- Page 7 – Installation du robinet; Écrou de couplage
- Page 8 – Guía de instalación; Surtidor de cuello de cisne para lavabo; Herramientas y materiales; Llave ajustable
- Page 9 – Antes de comenzar
- Page 10 – Instalación de la grifería
- Page 11 – AB
Installation Guide
Lavatory Gooseneck Spout
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página“ Español-1”
K-13770
K-13774
105340-2-AB
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
Before You Begin Observe all local plumbing and building codes. Shut off the main water supply. Kohler Co. reserves the right to make revisions in the design offaucets without notice, as specified in the Price Book. K-13770 K-13774 12-5/16" (31.3 cm) 12-5/16" (31.3 cm) 7-1/4" (18.4 cm) 7...
1. Faucet Installation Insert the spout into the countertop or lavatory hole. Secure the faucet by installing the tapered gasket, brass spacerwasher (thin-wall surfaces), and the hex nut to the faucet shank. Tighten the hex nut. NOTE: For thin-wall mounting surfaces, use the brass spacer washer so t...
