Kohler K-10588-CP- Installation Manual
Kohler K-10588-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hex Wrench
- Page 3 – Threaded Spouts
- Page 4 – Complete the Installation
- Page 5 – Guide d’installation; Bec de baignoire à montage mural; Outils et matériels
- Page 6 – Becs à montage tournant; Mamelon; Becs filetés
- Page 7 – Compléter l’installation
- Page 8 – Guía de instalación; Surtidor mural de bañera; Herramientas y materiales
- Page 9 – Instale el surtidor; PRECAUCIÓN: Riesgo de daños al sello interno.; Surtidores de ajuste deslizante; Niple; Surtidores de montaje roscado
- Page 10 – Termine la instalación
Installation Guide
Wall-Mount Bath Spout
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page“ Français-1”
Español, página“ Español-1”
K-10588
K-10589
1040216-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Install the Spout CAUTION: Risk of internal seal damage. Loosen the spout setscrew with a 5/32 ″ hex wrench prior to installing the spout. CAUTION: Risk of internal seal damage. Do not use petroleum-based lubricants. If the spout will not slide over thetubing, use soapy water or silicone-based lu...
Install the Spout (cont.) Apply thread sealant and install a 1/2 ″ copper tube to extend from 2-1/8 ″ (5.4 cm) to 3-1/2 ″ (8.9 cm) beyond the finished wall. Smooth the edges of the copper tubing. Loosen the setscrew with a 5/32 ″ hex wrench. Apply a bead of plumbers putty or other sealant around the...
