Kohler 1071003-2-B - Manual
Kohler 1071003-2-B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Construct the Stud Framing
- Page 5 – Install Shelves
- Page 7 – Verify Fit
- Page 9 – Guide d’installation; Colonne en aluminium; Outils et matériels
- Page 11 – Construire le cadrage du montant
- Page 13 – Installer les étagères
- Page 15 – Vérifier l'ajustement
- Page 17 – Guía de instalación; Columna de aluminio; Herramientas y materiales
- Page 19 – Construya la estructura de postes de madera
- Page 21 – Ensamble la unidad; Instale los estantes
- Page 23 – Verifique que quede bien
Installation Guide
Aluminum Column
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México
(Ej. K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-1840
1071003-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Kohler 1071003-2-B
Summary
1. Construct the Stud Framing Install the drain and supply pipes according to local plumbing codes. IMPORTANT! Plan the shower area around the desired placement of the shelving unit. Ensure the placement of the shelving unit will be free of obstructions (such as pipes or electrical boxes). IMPORTANT...
3. Assemble the Unit Install Shelves Insert a filler strip down into the left and right channel. With the tab of the clip pointing up, snap a clip above each filler strip. NOTE: The top filler strip will extend above the unit. Repeat this process for the remaining strips and clips. Temporarily inser...
4. Complete the Site Verify Fit Temporarily insert the unit into the stud pocket. Vertically center the unit, then verify the attachment flanges overlap the wall material a minimum of1/4 ″ (6 mm). IMPORTANT! If a minimum of 1/4 ″ (6 mm) overlap does not exist: Set the unit aside, remove the wall mat...
