KitchenAid KMCS522PPS - Manual
KitchenAid KMCS522PPS Microwave – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS; Tools and Parts; Tools Needed; Required Cutout Dimensions; Receptacle Location; Location Requirements
- Page 3 – Electrical Requirements; A separate circuit serving only this microwave oven.; Prepare Microwave Oven; Attach Rails; Unplug microwave oven before proceeding with installation.; making sure the flanges are forward and pointing up.; Secure the rails to the microwave oven bottom using four; Electrical Shock Hazard; WARNING; GROUNDING INSTRUCTIONS; Improper use of the grounding plug can
- Page 4 – Prepare Cutout/Cabinet Opening; against the bottom front facing of the opening.; Align the center arrows on the bottom duct with the centerline; drawn in Step 1 above.; Attach Rear Duct; Use four short screws to secure top of rear duct to the back
- Page 5 – Mark the three mounting holes through the bottom duct onto; Install the Microwave Oven; Position microwave oven near cutout opening.; four 123# screws into the mounting holes.
- Page 6 – Install Trim Kit Frame; Position trim kit frame over the opening so that the upper tabs; Secure trim kit frame to cutout/cabinet by installing four long
- Page 7 – Outillage et pièces; Outillage nécessaire; Exigences d'emplacement; Votre sécurité et celle des autres est très importante.; AVERTISSEMENT
- Page 8 – Profondeur minimale; Risque de choc électrique
- Page 9 – Préparation du four à micro-ondes; Fixation des rails; Débrancher le four à micro-ondes avant de poursuivre; des quatre vis courtes.; INSTRUCTIONS DE LIAISON; L’utilisation incorrecte du
- Page 10 – À l'aide de deux vis courtes, fixer le haut du conduit arrière au; Préparation de l'ouverture; Déterminer et marquer l’axe central sur le plancher de; reposer son rebord contre la face avant en bas de l'ouverture.; Aligner les flèches centrales du conduit inférieur avec l'axe; Fixation du arrière
- Page 11 – Marquer l'emplacement des trois trous de montage à travers; Installation du four à micro-ondes; Placer le four à micro-ondes à proximité de l’ouverture
- Page 12 – Installation du cadre de garniture; Placer le cadre de la trousse de garniture sur l'ouverture, de; Fixer le cadre de la trousse de garniture à l'ouverture
MICROWAVE OVEN BUILT-IN TRIM KIT
INSTALLATION INSTRUCTIONS
Built-In Trim Kit Models MTK1527, MTK1530
UL listed for use over any electric built-in oven, up to 30" (76.2 cm) wide
INSTRUCTIONS D’INSTALLATION
GARNITURE ENCASTRÉE POUR FOUR À MICRO-ONDES
Garniture encastrée pour modèles MTK1527, MTK1530
Homologation UL pour utilisation au-dessus de tous les fours encastrés électriques , jusqu’à 30" (76,2 cm) de largeur
MICROWAVE OVEN SAFETY
Table of Contents / Table des matières
MICROWAVE OVEN SAFETY ....................................................... 1
INSTALLATION INSTRUCTIONS ................................................. 2
Tools and Parts ........................................................................... 2
Location Requirements............................................................... 2
Required Cutout Dimensions...................................................... 2
Trim Kit Frame Dimensions ........................................................ 2
Electrical Requirements .............................................................. 3
Prepare Microwave Oven ........................................................... 3
Prepare Cutout/Cabinet Opening ............................................... 4
Install the Microwave Oven......................................................... 5
Install Trim Kit Frame .................................................................. 6
SÉCURITÉ DU FOUR À MICRO-ONDES .......................................... 7
INSTRUCTIONS D’INSTALLATION ................................................... 7
Outillage et pièces ............................................................................ 7
Exigences d'emplacement ............................................................... 7
Dimensions nécessaires de l'ouverture d'encastrement ................. 8
Dimensions du cadre de la trousse de garniture ............................. 8
Spécifications électriques ................................................................ 8
Préparation du four à micro-ondes .................................................. 9
Préparation de l'ouverture d’encastrement/dans le placard ......... 10
Installation du four à micro-ondes ................................................. 11
Installation du cadre de garniture................................................... 12
W11682371
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for KitchenAid KMCS522PPS
Summary
2 INSTALLATION INSTRUCTIONS Tools and Parts Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Parts Supplied (not shown to scale Required Cutout Dimensions * 27" (68.6 cm) trim kit ** 30" (76.2...
3 Electrical Requirements Observe all governing codes and ordinances.Required: ■ A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker. Recommended: ■ A time-delay fuse or time-delay circuit breaker. ■ A separate circuit serving only this microwave oven. Prepare ...
4 Prepare Cutout/Cabinet Opening 1. On the cutout floor, find and mark the centerline.2. Place the bottom duct in the opening, with the flange resting against the bottom front facing of the opening. 3. Align the center arrows on the bottom duct with the centerline drawn in Step 1 above. A. Cutout fl...