KitchenAid KESI901P - Manual
KitchenAid KESI901P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
30" Freestanding and Slide-In Electric Range
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
KERA807P
KERK807P
KESA907P
KESI901P
KESV908P
Ref. 9762035
06-28-05
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Electrical:
When a 4-wire or 3-wire, single
phase 120/240 volt, 60 Hz, AC only electrical
supply is available, a 50-amp maximum circuit
protection is required (or, if specified on the
model/serial rating plate, when a 4-wire or 3-wire
single phase 120/208 volt 60 Hz, AC only
electrical supply is available, a 40-amp maximum
circuit protection is required), fused on both
sides of the line. A time-delay fuse or circuit
breaker is recommended. The model/serial rating
plate is located on the oven frame behind the
storage drawer panel.
CABINET OPENING DIMENSIONS
*When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1
⁷⁄₈
" (4.8 cm) beyond
24" (61 cm) base cabinet.
A
B
C
D
E
F
A. 7
⁷⁄₈
" (20 cm)
B. 30" (76.2 cm)
C. 43
⁷⁄₈
" (111.4 cm)
overall height
D. 36" (91.4 cm) cooktop
height with leveling legs
lowered 1
¹⁄₂
turns
E. 30" (76.2 cm)
F. 27" (68,6 cm) to handle*
A. 35
⁵⁄₈
" (90.5 cm)
cooktop height with
leveling legs lowered
1
¹⁄₂
turns
B. 30
¹¹⁄₁₆
" (77.9 cm)
C. 30" (76.2 cm)
D. 27" 968.6 cm)*
E. 23
¹⁄₂
" (59.8 cm)
A
B
C
D
E
*NOTE:
24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than
¹⁄₄
" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood above the range, follow the instructions for dimensional clearances above the cooktop surface.
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other combustible
material
B. 18" (45.7 cm) upper cabinet to
countertop
C. 13" (33 cm) max. upper cabinet
depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE*.
F. 30" (76.2 cm) min. opening
width
G. Junction box - 8" (20.3 cm)
to 22" (55.9 cm) from either
cabinet, 7" (17.8 cm) max.
from door
H.
⁷⁄₈
" (2.2 cm) min. required
between cutout and cabinet
door or hinge
A
B
C
D
E
F
G
H
E
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other
combustible material
B. 18" (45.7 cm) upper cabinet
to countertop
C. 13" (33 cm) max. upper
cabinet depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE*.
F. 22
³⁄₄
" (57.8 cm) opening depth
G. 30" (76.2 cm) min. opening
width
H.
¹⁄₄
" (6.2 cm) radius both corners
I. Junction box - 8" (20.3 cm) to
22" (55.9 cm) from either
cabinet, 7" (17.8 cm) max. from
door
J.
⁷⁄₈
" (2.2 cm) min. required
between cutout and cabinet
door or hinge
A
B
C
D
E
F
G
H
I
J
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other combustible
material
B. 18" (45.7 cm) upper cabinet to
countertop
C. 13" (33 cm) max. upper cabinet
depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE*.
F. 30" (76.2 cm) min. opening
width
G. Junction box - 8" (20.3 cm)
to 22" (55.9 cm) from either
cabinet, 7" (17.8 cm) max.
from door
H.
⁷⁄₈
" (2.2 cm) min. required
between cutout and cabinet
door or hinge
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other
combustible material
B. 18" (45.7 cm) upper cabinet
to countertop
C. 13" (33 cm) max. upper
cabinet depth
D. 30" (76.2 cm) min. opening
width
E. For minimum clearance to
the top of the cooktop,
see NOTE*.
F. 22
³⁄₄
" (57.8 cm) opening depth
G. 30" (76.2 cm) min. opening
width
H.
¹⁄₄
" (6.2 cm) radius both corners
I. Junction box - 8" (20.3 cm) to
22" (55.9 cm) from either
cabinet, 7" (17.8 cm) max. from
door
J.
⁷⁄₈
" (2.2 cm) min. required
between cutout and cabinet
door or hinge
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
