King Canopy Event Tent 20FT X 20FT - Manual
King Canopy Event Tent 20FT X 20FT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PARTS LIST
- Page 3 – FRAME ASSEMBLY; NOTE: Attach the cover before inserting the legs.
- Page 4 – COVER ASSEMBLY
- Page 5 – LEGS ASSEMBLY
- Page 6 – ANCHORING YOUR UNIT
- Page 7 – IMPORTANT NOTICE: PLEASE READ CAREFULLY
- Page 8 – PRODUCT INFORMATION
Event Tent
™
20ft x 20ft
20ft Wide x 20ft Deep x 6ft 9in Side Height /
12ft 4in Center Height
King Canopy Item #: ET2020G
With 8 Legs, Green & White PE Cover,
Elastic Ball Straps & Foot Pads.
WARNING:
Keep all flame and heat sources
away from this tent fabric. Meets
the flammability requirements of
CPAI-84. It is not fire proof. The fabric
will burn if left in continuous contact
with any flame source.
Distributed by:
PIC America, LTD.
1730 Five Points Lane • Fuquay-Varina, NC 27526
1-800-800-6296 • www.kingcanopy.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- King
- Model
- Canopy Event Tent 20FT X 20FT
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- Format
Summary
PARTS LIST 6X6-2PC 16 pc 77.5” x 2” Pipe 6X6-15PC 9 pc 77.5” x 1 1/2” Pipe 4X2-2PC 8 pc 50” Swedge pipe 3W215PC 6 pc 3-way connectors 4W215PC 6 pc 4-way connectors BALLW 60 pc Elastic ball straps PFOOT2 8 pc Foot pads T2020ETG 1 pc Green/White PE Cover with Leg Skirts
FRAME ASSEMBLY Step 1 Separate all pieces according to size and shape and arrange per the illustration shown below. Please note: • The 8 - 50” x 2” and 8 - 77.5” x 2” pipes are used to form the roof rafters • The 9 - 1 1 / 2 ” x 77.5” pipes are used to form the sides & peak Step 2 Start with the...
COVER ASSEMBLY Step 1 Unfold the cover with the grommets toward the cover’s bottom and place over the frame. The flared edges should be located at each of the 4 corners of the frame. Step 2 Begin attaching the cover with the elastic ball straps by inserting the elastic cord of the ball strap underne...