Kenwood VR62 - Manual - manualsarea.com

Page 2 - SAFETY INSTRUCTIONS; regarding electrical systems.

2 – VR61 and VR62 VR61 and VR62 – 3 1. SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance wit...

Page 3 - TABLE OF CONTENTS

2 – VR61 and VR62 VR61 and VR62 – 3 14. Rigging Precautions: When mounting or suspending EAW Commercial loudspeaker enclosures, it is essential that load ratings, rigging techniques, and special safety considerations be appropriate for the installation. Use only the mounting/rigging points on the lo...

Page 6 - Mounting Instructions; Remove the screw from each end of the enclosure as shown below.

6 – VR61 and VR62 VR61 and VR62 – 7 Mounting Instructions 1. Remove the screw from each end of the enclosure as shown below. 2. Align the bracket slots with the mounting holes on each end of the enclosure. Make sure the four openings in the bracket arms face upward. 3. Onto each of the two supplied ...

Page 7 - Horn Rotation Instructions; TOP; Bracket Dimensions

6 – VR61 and VR62 VR61 and VR62 – 7 Horn Rotation Instructions • The high frequency horn can be rotated through 90 degrees to allow you to choose the best horn pattern for your installation. • From the factory, the horn is set to give a 90 degrees horizontal horn pattern if the loudspeaker is mounte...

Page 8 - Loudspeaker Cables

8 – VR61 and VR62 VR61 and VR62 – 9 4. CONNECTIONS WARNING: To prevent the risk of electric shock, do not connect the loudspeaker with the amplifier switched on. The protective cover over the terminal strip is a safety feature per CE requirements. Replace this cover after making the signal connectio...

Page 9 - Precautions; or conductors of different colors.

8 – VR61 and VR62 VR61 and VR62 – 9 Precautions • To prevent inductive phenomena causing humming or distortion, the speaker cables should not be run together with electrical energy conductors, microphone cables, or line-level audio lines. • Use speaker cables that have markings to distinguish the po...

Page 11 - Disclaimer; respective holders, and are hereby acknowledged.

10 – VR61 and VR62 VR61 and VR62 – 11 6. SPECIFICATIONS Disclaimer EAW Commercial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy....

Page 12 - PERFORMANCE GRAPHS

12 – VR61 and VR62 VR61 and VR62 – 13 PERFORMANCE GRAPHS VR62 Impedance vs Frequency VR62 Beamwidth vs Frequency VR62 Axial Response vs Frequency 100 10 1 10 100 1000 10k 20k Frequency (Hz) Ohms 100 10 1 10 100 1000 20k 10k Frequency (Hz) Ohms 120 110 100 90 80 70 60 10 100 1000 10k 20k SPL dB Frequ...

Page 14 - SERVICE and MAINTENANCE; Maintenance; and cosmetic condition.; Service; center. You can also email EAW Commercial Tech Support at:; BIG BOLD PRINT

14 – VR61 and VR62 VR61 and VR62 – 15 8. SERVICE and MAINTENANCE Maintenance Usually, your EAW Commercial loudspeaker will not require regular maintenance for normal use. However, you can do several things to keep your loudspeaker in good operating and cosmetic condition. • Testing: Periodically tes...

Page 15 - EAW Commercial Technical Support

14 – VR61 and VR62 VR61 and VR62 – 15 5. Tech Support will tell you where to ship the unit when you call for a Service Request Number. We suggest insurance for all forms of cartage. EAW Commercial Technical Support Phone (USA/Canada) 888-337-7404 Phone 425-892-6503 Fax 425-485-1152 Address One Main ...

Kenwood VR62 - Manual

Table of Contents:

Summary

Other Kenwood Models