Kenwood KVX-5- User Manual

Page 2 - Safety Precautions; IMPORTANT SAFEGUARDS; CAUTION

2 E N Safety Precautions Caution: Read this page carefully to ensure safe operation. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFEGUARDS Please read all of the safety and operating instructions before operating this unit. For bestresults,...

Page 3 - Before Applying Power; AC adaptors are designed for operation as follows.; Contents

3 E N Before Applying Power Caution: Read this page carefully to ensure safe operation. AC adaptors are designed for operation as follows. Europe and U.K. .................................................................. AC 230 V only Contents Safety Precautions .......................................

Page 4 - Introduction; Checking the Accessories; Check the accessories as specified below:; Using the Stand; Slowly pull out the stand until it stops.; cause stand breakage.; To make the TV more stable during use

4 E N Introduction Keep the packing case for later usage, e.g., protection of your system in transportation forrepair services and so on. Checking the Accessories Check the accessories as specified below: AV cable (1 piece) Using the Stand You can incline your system using the stand on the rear when...

Page 5 - Plug the AC adaptor into the AC outlet.; Connecting AV Equipment; Connections

5 E N Connecting the Power Supply (AC adaptor) Plug the AC adaptor into the AC outlet. AV1 IN AV2 IN DC IN PHONES POWER OFF ON Note: Be sure the POWER switch is set to the OFF position before you connect the ACadaptor. Connecting the AC adaptor with the POWER switch set to the ON positionmay cause a...

Page 6 - Name and Function of Parts

6 E N MENU VOL. INPUT BRIGHT MENU SET POWER OFF ON TFT ACTIVE MATRIX PHONES AV1 IN AV2 IN DC IN AV1 AV2 1 POWER switch Turns on or off the power of the system. 2 PHONES terminal Connects headphones. (Page 10) • N o s o u n d w i l l b e e m i t t e d f r o m t h e speaker. 3 AV1 IN terminal Inputs a...

Page 7 - Setting the Menu; Selecting Menu Items; ) shows a menu item currently being selected.; MODE; Setting Menu; ) at menu item “MODE” indicates a menu currently being selected.

7 E N Pressing the MENU button displays the following menu on the screen. Setting the Menu Note: The contents set up just before the power was turned off appears on the screen.The screen above is an image that appears when you purchased the system. Selecting Menu Items The arrow ( 3 ) shows a menu i...

Page 8 - Sets PAL for the Color system.; Initial Resetting; While pressing the MENU button, turn on the POWER switch.

8 E N Selecting the Color System (MODE) You can select one of the following modes for the Color system.AUTO: Automatically selects PAL or NTSC according to the video signal received.PAL: Sets PAL for the Color system. NTSC: Sets NTSC for the Color system. 1 Press the MENU button to select “MODE”. 2 ...

Page 9 - • Pressing the AV1 button displays “AV1” at the upper right portion; Selecting AV Input; Adjusting the Sound Volume; button to adjust the sound volume.

9 E N VOLUME 50 AV1 INPUT AV2 VOL. Select either one of the two AV inputs by using the AV1 or AV2 button.Turning on the power selects the AV input selected just before the power was turned off. • Pressing the AV1 button displays “AV1” at the upper right portion of the screen for several seconds, rec...

Page 10 - Press the BRIGHT; Adjusting the Brightness of the Screen; When you use headphones, no sound will be emitted from the speaker.

1 0 E N BRIGHT Press the BRIGHT 5 / ∞ button to adjust the brightness of the screen. An numerical adjustment value (0~100) is displayed on the screen dur-ing adjustment. Note: The brightness of the screen differs depending on the angle atwhich you see the liquid crystal panel. So, adjust the brightn...

Page 11 - Action to be taken; Troubleshooting Problems

1 1 E N Action to be taken • Check the AC adaptor for proper connection. • Check that the POWER switch is turned on. • Check that the brightness and volume are minimized or the system is put in mute state. • Check the selected AV input (AV1 or AV2) for connection to AV equipment. • Check for recepti...

Page 12 - Specifications; For your records

1 2 E N Specifications Model Designation 5.6-inch LCD Color Monitor KVX-5 Maximum external Width: 180 mm (7-1/16") dimensions Height: 136 mm (5-3/8") Depth: 55 mm (2-3/16") Weight (net) 620 g (1.4 lb) AC adaptor DC 12 V Liquid Crystal Panel High-resolution 5.6-inch color LCD Driving Syst...

Table of Contents:

Other Manuals for Kenwood KVX-5

Summary

Other Kenwood Models