Kenwood KVS-60- User Manual
Kenwood KVS-60– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety First
- Page 3 – Placing the speakers
- Page 6 – Specifications
Introduction
Your Kenwood KVS speakers were
designed to meet the demands of
today’s high-quality film soundtracks.
Your new speakers:
• Deliver wide dynamic range
• Sonically match other speakers
in the KVS series
• Feature quality-built acoustically-
optimized enclosures
• Were designed, engineered, and
assembled in the USA.
Installing the speakers isn’t difficult,
but please read and follow all of the
instructions in this manual to get
maximum performance from your
new speakers. And be sure to read
the manual for the receiver, power
amplifier, or pre-amplifier to which
you’re connecting these speakers.
Unpacking
Unpack your new speakers carefully
and examine them for shipping
damage. If they are damaged or fail
to operate, notify your dealer imme-
diately. If your speakers were
shipped to you directly, notify the
shipping company without delay.
Only the person or company who
originally received the unit can file a
claim against the carrier for shipping
damage. Keep the original carton
and packing materials in case you
need to transport or ship your
speakers.
In this box
This box should contain either:
• KVS-50 Center Speaker (1)
• KVS-60 Surround Speakers (2)
If you bought the KVS-5060
Center/Surround Speaker Package,
you should receive 2 boxes with all
3 speakers.
About speaker wire
We ask you to buy the wire sepa-
rately, since we don’t know how
much wire you will need. We
suggest that you buy wire that is at
least 18-gauge or thicker.
Remember, the smaller the number,
the thicker the wire, so 18 gauge
wire is thicker than 20 gauge wire.
Before you run out to buy speaker
wire, read the ‘Placing the speakers’
section. You’ll need to know where
your speakers will go to determine
how much wire to buy.
For your records
Record the serial number (it’s on
the back of the speaker) on the
warranty card, and in the space
below. If you need to call your
dealer for information or service,
you’ll need these numbers. And be
sure to save your original receipt.
Model
Serial Number
Model
Serial Numbers
Setting up your
Kenwood
KVS Speakers
KVS-50 Center Speaker
KVS-60 Surround Speakers
KVS-50
KVS-60
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Kenwood KVS-60
Summary
Please read these safety instructionscarefully. They can help preventelectrical shock, fire, and damage tothe unit. Safety Precautions For all units 1 Dispose of the packaging materi- als properly. After you take the unit out of its shipping bag, dispose of the bag, keeping it out of the reach of ch...
Important Please wait until you’ve connected all of the cables before plugging the receiver or amplifier into the AC wall outlet and turning it on. KVS-50 Center Speaker We designed the KVS-50 Center Speaker with both a flat side with an adjustable leg, and an angled side. You can place the speaker ...
KENWOOD USA CORPORATIONPO Box 22745Long Beach, California 90801-5745 1-800-KENWOOD www.kenwoodusa.com Printed on recycled paper using10% post-consumer waste. Important Due to product upgrades, specifications may be changed without notice. KVS-50 Center Speaker Enclosure: Acoustic suspension Woofers:...
