Kenwood KVS-400 - Manual
Kenwood KVS-400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions; Safety First
- Page 3 – Placing the speakers
- Page 6 – Specifications
Introduction
Your Kenwood KVS speakers were
designed to meet the demands of
today’s high-quality music recordings
and film soundtracks.
Your new speakers:
• Deliver wide dynamic range and
powerful bass response
• Feature quality-built acoustically-
optimized enclosures
• Are magnetically-shielded for use
in audio/video systems
• Were designed, engineered, and
assembled in the USA.
Installing the speakers isn’t difficult,
but please read and follow all of the
instructions in this manual to get
maximum performance from your
new speakers. If you’re also
connecting other equipment, such
as a receiver, power amplifier, or
pre-amplifier, use this manual in
combination with the materials that
came with those components.
Unpacking
Unpack your new speakers carefully
and examine them for shipping
damage. If they are damaged or fail
to operate, notify your dealer imme-
diately. If your speakers were
shipped to you directly, notify the
shipping company without delay.
Only the person or company who
originally received the unit can file a
claim against the carrier for shipping
damage. Keep the original carton
and packing materials in case you
need to transport or ship your
speakers.
About speaker wire
We ask you to buy the wire sepa-
rately, since we don’t know how
much wire you will need. We
suggest that you buy wire that is at
least 18-gauge or thicker.
Remember, the smaller the number,
the thicker the wire, so 18-gauge
wire is thicker than 20-gauge wire.
Before you run out to buy speaker
wire, read the section on ‘Placing
the speakers’ on page 3. You’ll need
to know where your speakers will
go before you buy the speaker wire.
For your records
Record the serial number (found on
the back of the unit) on the
warranty card, and in the space
below. If you need to call your
dealer for information or service,
you’ll need the model and serial
numbers. And be sure to save your
original receipt.
Model
Serial Number
Setting up your
Kenwood
KVS Speakers
KVS-
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Please read these safety instructionscarefully. They can help preventelectrical shock, fire, and damage tothe unit. Safety Precautions For all units 1 Dispose of the packaging materi- als properly. After you take the unit out of its shipping bag, dispose of the bag, keeping it out of the reach of ch...
Placing the speakers Finding the best locations for yourspeakers before you connect themto your amplifier will make routingthe wires easier. Important Please wait until you’ve connectedall of the cables before plugging theamplifier into the AC wall outlet and turning it on. • For the best stereo eff...
Important Due to product upgrades, specifications may be changed without notice. KVS-400 Enclosure: Ported Woofers: 8 in (2) Midrange: 4 in polypropylene cone type Tweeter: 3/4 in soft-dome type Nominal impedance: 8 ohm Power handling: 140 watts Frequency response: 40 Hz – 20,000 Hz Dimensions Width...
