Page 2 - English; Contents; Before use
— 2 — English Contents Before use Safety precautions ........................................................................3Handling Compact discs................................................................5 General features Power ..................................................................
Page 3 - IMPORTANT INFORMATION; non-Kenwood CD changers; CAUTION; Safety precautions
— 3 — To prevent injury or fire, take thefollowing precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out ofplace when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0....
Page 4 - NOTE; Cleaning the Faceplate Terminals; Cleaning the CD Slot; Reset button
— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that doesnot solve the problem, consult your Kenwooddealer. • Characters in the LCD may become difficult to read in te...
Page 5 - Handling Compact discs
— 5 — Handling Compact discs Playing a CD that is dirty, scratchedor warped can cause the sound toskip and the unit to operateincorrectly, resulting in worsenedsound quality. Take the followingprecautions to prevent your CDs fromgetting scratched or damaged. Handling CDs • Do not touch the recorded ...
Page 6 - Selecting standby mode:; Switching Modes; Turning on the power:; Power; General features; FM; PWR OFF; LOUD indicator
Switching Modes: Each time you press the SRC (source) button, the modeswitches as follows: Selecting standby mode: Press the SRC button repeatedly and switch to "OFF"When "OFF" is displayed, the standby mode is activated.The standby mode turns all functions off while leaving thepower...
Page 7 - Audio Control Setting; This function allows you to turn down the volume quickly.; Attenuator
"BAS": Adjust the bass level. Setting values: - 8 - + 8 Adjust various parameters of sound quality. Press the A.ADJ button for at least one second to enter thecontrol mode. Selecting mode Press either the FM or AM button.Each time the button is pressed, the adjustment mode willchange.Please ...
Page 8 - Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,helping to deter theft. Grooves Release button Projections Theft Deterrent Faceplate Adjust the time. When the time is not displayed, first press the CLK button todisplay the time. Press the CLK button for at least two seconds to enter the...
Page 9 - Tuner features; Removing the Faceplate:; CRSC
Tuner features Removing the Faceplate: Press the release button.The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplatein its special storage case while detached. • Do not expos...
Page 10 - Frequency Step Setting; Auto Memory Entry; Recalling a Preset Station:; Station Preset Memory; Tuning
Switch the frequency step used in seeks. The factory defaultsare 50 kHz for FM and 9 kHz for AM. Turn the power off. Hold down buttons #1 and #5, then turn the power back on.The frequency step settings will be changed to 200 kHz for FMand 10 kHz for AM. 2 1 Frequency Step Setting You can automatical...
Page 11 - CD/External disc control features; indicator lights up when CRSC is on.; Returning Frequency Step Settings to Original Values:
CD/External disc control features Temporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.The factory default for this function is ON. Turning CRSC On/Off: Press the CRSC button for at least one second to turn thefunction on/off.The indicato...
Page 12 - Making a Reverse Track Search:; Track Search; Fast Forwarding Disc Play:; Fast Forwarding and Reversing Disc Play; Playing Other Disc mode; Stopping and Ejecting CDs:; Playing CDs
Search forward or backward through the tracks on the disc untilyou reach the one that you want to listen to. Making a Reverse Track Search: Track Search Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 b...
Page 13 - Track Scan; Repeat playing the track or the disc currently being listened to.; Making a Reverse Disc Search:; Disc Search; Function of disc changers)
Successively play the beginning of each track on a disc untilyou find the track that you want to listen to. Starting the Track Scan : Press the SCAN button. The SCN indicator lights up and thefirst 10 seconds of each track will be played, in order.The track number currently being heard blinks in the...
Page 14 - Magazine Random Play; Random Play; Starting the disc scan:; Disc Scan
Function of the KDC-4016 Play the tracks on all the discs in the disc changer in randomorder. Press the M.RDM button to switch magazine random play onand off.The RDM indicator lights up when magazine random play isturned on.The disc and track numbers will change over and over in thedisplay as the ne...
Page 15 - Loading and Replacing the Batteries:; Basic Operations of remote; ATT
The supplied remote control unit is in its storage case. Do not set the remote on hot places such as above thedashboard. Loading and Replacing the Batteries: Use two “AAA”-size batteries.Slide the cover while pressing downwards to remove it asillustrated.Insert the batteries with the + and – poles a...
Page 16 - • VOLUME buttons; Basic operations
• 4 / ¢ buttons Press the 4 button to search through the tracks backward. Press the ¢ button to search through the tracks forward. • DISC buttons (for disc changers) Press the DISC – button to search through the discs backward. Press the DISC + button to search through the discs forward. • 38 button...
Page 17 - Accessories; External view; Installation Procedure
— 17 — The use of any accessories except for those provided mightresult in damage to the unit. Make sure only to use theaccessories shipped with the unit, as shown above. 2 CAUTION Accessories ..........................................1 ..........................................1 ......................
Page 18 - Connecting Wires to Terminals; connector; If no connections are made, do not let the wire come out from the tab.
English — 18 — Connecting Wires to Terminals P.CONT.OUT ANT. CONT. + + + + FRONT • L FRONT • R REAR • L REAR • R – – – – – + When only two speakers are being connected to the system,connect the connectors either to both the front outputterminals or to both the rear output terminals (do not mixfront ...
Page 19 - Installation; Installing in Japanese-Made Cars; • During installation, do not use any screws except for those
— 19 — Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mountingstrap Self-tappingscrew (commercially available) Firewall or metal support Accessory 4 Installation ■ Installation 8 mm MAX. ø5m...
Page 20 - Removing the hard rubber frame; Removing the Unit; Remove the Hex-head screw with integral washer (M4
English — 20 — Installation Removing the hard rubber frame ■ When the lower level is removed, remove the upper twolocations. 2 The frame can be removed from the top side in the samemanner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the twolocks on the lower level.Lower the ...
Page 21 - Screwing the Faceplate on the Unit; Never insert the taptite screw (ø4; the hole shown below.
— 21 — Accessory 7 Screwing the Faceplate on the Unit ■ Never insert the taptite screw (ø4 × 16 mm) in any other screw hole than the one specified. If you screw it in another hole, it willcontact and may cause damage to the mechanical parts insidethe unit. 2 CAUTION If you want to fasten the facepla...
Page 22 - Troubleshooting Guide; SOLUTION
English — 22 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM One of the speaker wires is being pinched by...
Page 23 - If the following situations, consult your nearest service center:
— 23 — External disc control mode (KDC-4016 only) The computer chip in the unit is not functioning normally. Press the reset button on the unit (see p. 4). The disc control mode cannotbe selected. No wire has been connected to the disc changer inputterminal on the unit. Connect the wire to the disc ...
Page 25 - Tone action; General; Specifications subject to change without notice.
— 25 — FM tuner section Frequency range (200 kHz space) .............87.9 MHz – 107.9 MHz (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) .....................9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ................15.2dBf (1.6 µV/75 Ω ) Frequency re...
