Kenwood KDC-115S- Manual

Page 2 - English; Contents; Before use; Location : Bottom Panel; FCC WARNING; CAUTION; Warning

— 2 — English Contents Before use 2 Warning .....................................................................................2 Safety precautions ........................................................................3Handling Compact discs..........................................................

Page 3 - Safety precautions; WARNING

— 3 — This equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment may cause harmful interferencet...

Page 4 - • If you experience problems during; NOTE; Reset button; Cleaning the CD Slot

— 4 — English Safety precautions • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that doesnot solve the problem, consult your Kenwooddealer. • Characters in the LCD may become diff...

Page 5 - Handling Compact discs

— 5 — Handling Compact discs Playing a CD that is dirty, scratchedor warped can cause the sound toskip and the unit to operateincorrectly, resulting in worsenedsound quality. Take the followingprecautions to prevent your CDs fromgetting scratched or damaged. Handling CDs • Do not touch the recorded ...

Page 6 - Volume; Selecting standby mode:; Tuner mode; Switching Modes; Turning on the power:; Power; General features; PWR OFF; ATT indicator

Increasing Volume: Volume Switching Modes: Each time you press the SRC (source) button, the modeswitches as follows: Selecting standby mode: Press the SRC button repeatedly and switch to "OFF" .When "OFF" is displayed, the standby mode is activated.The standby mode turns all function...

Page 7 - Adjust various parameters of sound quality.; Audio Control Setting; This function allows you to turn down the volume quickly.; Attenuator

"BL" : Adjust the balance level. Setting values: Left 15 – Right 15 "TRE" : Adjust the treble level. Setting values: - 8 – + 8 "BAS" : Adjust the bass level. Setting values: - 8 – + 8 Selecting mode Press the BAND button.Each time the button is pressed, the adjustment mode wi...

Page 9 - Tuning; Tuner features

You can choose between auto seek tuning of receivablefrequencies and manual tuning. Press the SRC (source) button repeatedly to select the tunermode. "TUnE" is displayed when the tuner mode has beenselected. Press the BAND button to select the band.Each time you press the BAND button, the ba...

Page 10 - indicator lights up when CRSC is on.; Select the band for auto memory entry.; Auto Memory Entry; Select the band/ station that you want to have stored.; Station Preset Memory

Temporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.The factory default for this function is ON. Turning CRSC On/Off: Press the CRSC button for at least one second to turn thefunction on/off. The indicator lights up when CRSC is on. Stro...

Page 11 - Fast Forwarding Disc Play:; Fast Forwarding and Reversing Disc Play; Stopping and Ejecting CDs:; Playing CDs; CD player features; indicator

Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. Fast Forwarding and Reversing Disc Play Playing CDs: If no CDs are inserted, insert one in the ...

Page 12 - Play all the tracks on the current disc in random order.; Random Play; Stopping to Listen to the Track Being Scanned:; Starting the Track Scan :; Track Scan; Repeat playing the track currently being listened to.; Track Repeat; Making a Reverse Track Search:; Track Search

Play all the tracks on the current disc in random order. Press the RDM button to switch random play on and off.The RDM indicator lights up when random play is turned on.The track number will change over and over in the display asthe next track is being selected.When the track has been selected, play...

Page 13 - Accessories; External view; Installation Procedure

— 13 — The use of any accessories except for those provided mightresult in damage to the unit. Make sure only to use theaccessories shipped with the unit, as shown above. 2 CAUTION Accessories ..........................................1 ..........................................1 ......................

Page 14 - Connecting Wires to Terminals; connector; If no connections are made, do not let the wire come out from the tab.

English — 14 — Connecting Wires to Terminals P.CONT.OUT ANT. CONT. – + – + – + – + FRONT • L FRONT • R REAR • L REAR • R – + FUSE 10A L R REAR When only two speakers are being connected to the system,connect the connectors either to both the front outputterminals or to both the rear output terminals...

Page 15 - Installation; Installing in Japanese-Made Cars; • During installation, do not use any screws except for those

— 15 — Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mountingstrap Self-tappingscrew (commercially available) Firewall or metal support Accessory 4 Installation ■ Installation 8 mm MAX. ø5m...

Page 16 - Removing the hard rubber frame; Removing the Unit; Remove the Hex-head screw with integral washer (M4

English — 16 — Installation Removing the hard rubber frame ■ When the lower level is removed, remove the upper twolocations. 2 The frame can be removed from the top side in the samemanner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the twolocks on the lower level.Lower the ...

Page 17 - Troubleshooting Guide; SOLUTION

— 17 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM One of the speaker wires is being pinched by a screw...

Page 18 - HOLd

English — 18 — Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take therecommended actions. The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),stopping all operation. ...

Page 19 - Tone action; General; Specifications subject to change without notice.

— 19 — FM tuner section Frequency range (200 kHz space) .............87.9 MHz – 107.9 MHzUsable sensitivity (S/N = 30dB) .....................9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ................15.2dBf (1.6 µV/75 Ω ) Frequency response (±3.0 dB) ..............................30 H...

Table of Contents:

Other Manuals for Kenwood KDC-115S

Summary

Other Kenwood Models