Kenwood KB-IR1- Manual
Kenwood KB-IR1– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT NOTES A; TITLE INPUT; Select an empty disc slot; Make sure; NAMING DISCS AND TRACKS; Enter the Disc Name
- Page 3 – ABOUT TYPING; Discs with CD Text
- Page 4 – KENWOOD LIMITED WARRANTY
Setting-Up and Using Your
KB-IR1 InfraRed keyboard
1. Removing the Battery Cover
Remove the battery cover by pressing down on the embossed
arrow and sliding the cover off in the direction indicated by the
arrow in the diagram to the right.
2. Selecting the Model
Important:
Your keyboard is designed to be used with several
different models of Kenwood CD players.
Before installing the batteries
you must set the “DIP”
switches located beneath the battery cover to match your par-
ticular changer model.
Set the DIP switches to match your changer’s model according
to the diagram to the right.
3. Installing the batteries
After removing the battery cover and setting the DIP switches
as described above, insert 2 “AA” batteries (not included) as
shown in the diagram to the right.
Replace both batteries with fresh ones when the “Batt Low”
indicator (located on the top of the keyboard) is lit.
Battery Information
To maximize battery life, your keyboard has a Sleep Mode, and
is only “on” when you are pressing a key. When you are not
using your keyboard store it so that the keys are not accidental-
ly being pressed.
If you’re not going to be using your keyboard for a long period
of time, remove the batteries.
4. Operating Range
When using your keyboard, point its front edge (where the IR
transmitter is located) towards the CD changer.
The keyboard will operate up to 20 feet away and 30 degress
off-axis from your CD player. If you use the keyboard outside of
this range, it may not function properly. See the diagram to the
right.
Congratulations! Your KB-IR1 IR keyboard will make it quicker and easier for you to program disc and track titles into your
Kenwood 200 disc CD changer.
Since your keyboard duplicates the functions of the remote control that was included with your CD changer, before using it you
should read your CD changer’s instruction manual to become familiar with all of the different functions that can be controlled by
the remote and keyboard.
1.
2.
3.
4.
30°
30°
20 ft
IR TRANSMITTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Kenwood KB-IR1
Summary
IMPORTANT NOTES A 1: Press the MODE key. The display flashes: TITLE INPUT 2: Press the SET D--- T-- disc number DXXX A. Open the loading door and leaveit open for this entire operation B. Select an empty disc slot C. Insert a CD in the empty slot. Make sure the label faces towards your right. NAMING...
ABOUT TYPING (keys shown in dark gray) T key. The display reads: - SELECT , then the r you selected will flash: 5: After you have typed-in the entire title, press the ENTER key. The display reads: TITLE STORE!! 6: The display then switches to show the disc number, and the first track number flashes:...
Repetitive Stress Injury Continuous use of a keyboard may cause Repetitive Stress injuries or related injuries. If you feel any aching, numbing or tingling in your arms, wrists or hands, consult a qualified health professional. To reduce your risk of repetitive stress injury: • Take frequent breaks ...
