Page 2 - Preparation; For the United Kingdom; Safety precautions; TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EX-; Before applying power; Caution : Read this page carefully to ensure safe operation.
HD-7/EN 2 Preparation Units are designed for operation as follows. U.S.A. and Canada ............................. AC 120 V only Europe and U.K. ................................. AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement...
Page 3 - Special features; recorded on a CD recorder.
HD-7/EN 3 Preparation Special features Before applying power Playback of CD-R/RW discs The CD player is capable of playing both CD-R and CD-RW music discs, which have been recorded on a CD recorder. "Linear T.R.A.I.T." (for Europe and U.K.), "K-STAT" (for USA)power transistors Kenwoo...
Page 4 - Unpacking; FCC WARNING; Accessories
HD-7/EN 4 Preparation Unpacking Unpack the unit carefully and make sure that all the accessories are present. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unitwas shipped to you directly, notify your shipper immediately. Kenwoo...
Page 5 - Contents; Preparation section
HD-7/EN 5 Preparation Contents Caution : Read the pages marked carefully to ensure safe operation. Before applying power Before applying power ........................................ 2 Safety precautions ................................................. 2 Special features .............................
Page 6 - IMPORTANT SAFEGUARDS
HD-7/EN 6 Preparation 6. Temperature – The appliance may not function properly if used at extremely low, or freezing temperatures. The idealambient temperature is above +5°C (41°F). 7. Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or othera...
Page 8 - Basic; System connections; AM loop antenna; Connection of accessory antennas
HD-7/EN 8 Basic System connections Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related com- ponents. Do not plug in the power lead until all connections are completed. CAUTION Be sure to adhere followings. Or proper ven...
Page 9 - Connection of the speaker system; FM outdoor antenna; System connection
HD-7/EN 9 Basic Connection of the speaker system Connection of FM outdoor antenna (sold separately) − + − + 3 2 1 FM outdoor antenna Lead the 75 Ω coaxial cable connected to the FM outdoor antenna into the roomand connect it to the FM 75 Ω terminal. Please remove the indoor antenna afteran outdoor a...
Page 10 - Connection of a subwoofer (sold separately); Connection of a cassette deck (sold separately)
HD-7/EN 10 Basic Connection of a subwoofer (sold separately) A subwoofer provides powerful playback of the very low range. It can be used with all types of playback. KENWOOD Connection of a cassette deck (sold separately) Connect a separately sold cassette deck with the accessory audio cord to the t...
Page 11 - Connection to an external source (audio equipment); In case of analog connection; In case of digital connection
HD-7/EN 11 Basic Connection to an external source (audio equipment) In case of analog connection You can use the input terminal AUX at the rear of this unit to connect a video deck or a record player (P-110) (sold separately) with built-in RIAA equalizer amplifier. video deck ora record player Audio...
Page 12 - Controls and indicators; Main unit
HD-7/EN 12 Basic 1 2 3 4567 8 9 0 !@ $% # ^ & 1 standby/timer indicator Standby status (power OFF): Red Timer standby status (power OFF): Green Energized (power ON): Not lit 2 key ^ Press to set the unit to On or Standby. 3 sound key & Used to switch the sound. 4 1 TUNING ¡ keys CD : ¡ Used ...
Page 13 - Display
HD-7/EN 13 Basic Controls and indicators Display 1 FM REMAIN TOTAL AUTO TUNED kHz MHz AMPM PGM RANDOMMUTEN.B.S.DIRECT 1 2 STEREO A.P.S. PTY 1 2 LR 30 10 5 3 1 0 (–dB) 2 4 DIGITAL R .D .S 1 2 3 4 5 6 7 8 9 ! # 0 @ $ ^ % 1 Playback indication 2 Playback pause indication 3 AM/FM (reception band) indica...
Page 14 - Remote control unit
HD-7/EN 14 Basic DOWN UP VOLUME 1 POWER 2 4 5 6 7 8 9 0 +10 3 SET ENTER DISPLAY TIME CLEAR TUNER/BAND AUX /TAPE CD 6 1 ¡ 4 ¢ 7 P.CALL TUNING DOWN SLEEP REPEAT RANDOM /PTY P.MODE /RDS DISP. TIMER SOUND MUTE UP STOP AUTO/MONO !@# 9 0 1 2 3 4 567 8 Controls and indicators Remote control unit 1 Numeric ...
Page 15 - Operation of remote control unit; Loading batteries; Operation
HD-7/EN 15 Basic 30˚ 6m 30˚ Operation of remote control unit Loading batteries 1 Remove the cover. 2 Insert batteries. 3 Close the cover. ÷ Insert two R6 ("AA"-size) batteries following the polarity indications. After plugging the power cord of this unit, press the POWER ( ) key of the remot...
Page 16 - Basic use method; Listening through headphone
HD-7/EN 16 Basic Basic use method DOWN UP VOLUME 1 POWER 2 4 5 6 7 8 9 0 +10 3 SET ENTER DISPLAY TIME CLEAR TUNER/BAND AUX /TAPE CD 6 1 ¡ 4 ¢ 7 P.CALL TUNING DOWN SLEEP REPEAT RANDOM P.MODE TIMER SOUND MUTE UP STOP AUTO/MONO II 1 1 2 2 3 3 sound phones source direct 3 2 1 MUTE SOUND 1 Power ON (OFF)...
Page 17 - Muting the sound temporarily; Adjust the left/right volume balance; Direct selection of the source direct function
HD-7/EN 17 Basic Muting the sound temporarily MUTE ÷ Press again to resume the original volume. ÷ This is also canceled when the volume is changed. MUTE Blinks Adjust the left/right volume balance 1 Select "BALANCE" as follows. 1 Press the "menu" key. 2 Select "BALANCE" with ...
Page 18 - Adjusting the tone; TONE CONTROL; TONE CONTROL setting; Listening with use of TONE CONTROL
HD-7/EN 18 Basic Adjusting the tone TONE CONTROL The low range (BASS) and the high range (TREBLE) each can be set to a desired level. Three types of tone control can be set in advance. TONE CONTROL setting Main unit only 1 2 3 1 Select "TONE ?" as follows. 1 Press the "menu" key. 2 S...
Page 20 - Playback of CD; To pause playback
HD-7/EN 20 Basic DOWN UP VOLUME 1 POWER 2 4 5 6 7 8 9 0 +10 3 SET ENTER DISPLAY TIME CLEAR TUNER/BAND AUX /TAPE CD 6 1 ¡ 4 ¢ 7 P.CALL TUNING DOWN SLEEP REPEAT RANDOM P.MODE TIMER SOUND MUTE UP STOP AUTO/MONO II 1 1 2 2 2 7 STOP stop 7 display SET CD 6 CD 6 set 1 ¡ 4 ¢ P.CALL 4 ¢ P.CALL DISPLAY /CHAR...
Page 21 - Skipping tracks; Playback from desired track; To fast forward and backward
HD-7/EN 21 Basic Skipping tracks ÷ The track in the direction of the key pressedis skipped, and the selected track will beplayed from the beginning. ÷ When the 4 key is pressed once during playback, the track being played will beplayed from the beginning. ÷ To skip further to a track located before ...
Page 22 - Receiving broadcast station
HD-7/EN 22 Basic DOWN UP VOLUME 1 POWER 2 4 5 6 7 8 9 0 +10 3 SET ENTER DISPLAY TIME CLEAR TUNER/BAND AUX /TAPE CD 6 1 ¡ 4 ¢ 7 P.CALL TUNING DOWN SLEEP REPEAT RANDOM P.MODE TIMER SOUND MUTE UP STOP AUTO/MONO II 1 1 1 3 AUTO/MONO display ENTER 1 ¡ 4 ¢ P.CALL 4 ¢ P.CALL DISPLAY /CHARAC TUNING 1 ¡ TUNI...
Page 23 - Channel space setting
HD-7/EN 23 Basic 1 Select the tuner input. 2 Press the "ENTER" key for more than 2 sec-onds Collective presetting of stations ÷ A maximum of 40 stations of the band presentlybeing received will be preset. ÷ When there are many stations and the intendedstation has not been preset, please also...
Page 25 - Before using RDS
HD-7/EN 25 Basic RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broad-cast signal. Tuners and receivers designed for RDS reception can extract the information from the broad-cast signal for use with various functions such as automatic display of...
Page 26 - Searching for a desired program type (PTY search)
HD-7/EN 26 Basic By specifying the type of program (genre) you want to listen to, the tuner automatically searches for astation which is currently broadcasting a program of the specified type. However, if a station is not preset by auto memory, "NO DATA" will light instead of the program (ge...
Page 27 - To change to a different program type :; Using the RDS display function
HD-7/EN 27 Basic 3. Start the search. To change to a different program type : Repeat steps 1., 2., 3. ÷ No sound is heard while "PTY" is blinking. ÷ If a program of the desired type cannot be found,"NO PROG" is displayed, then after several secondsthe display returns to the original ...
Page 28 - Start playback of the external source.; Listening to an AUX/TAPE input source
HD-7/EN 28 Basic DOWN UP VOLUME 1 POWER 2 4 5 6 7 8 9 0 +10 3 SET ENTER DISPLAY TIME CLEAR TUNER/BAND AUX /TAPE CD 6 1 ¡ 4 ¢ 7 P.CALL TUNING DOWN SLEEP REPEAT RANDOM P.MODE TIMER SOUND MUTE UP STOP AUTO/MONO II 1 1 2 2 1,2 menusetvolume/multi control 4 4 VOLUME 1. Press the AUX/TAPE key. When the AU...
Page 30 - Application; Various CD playback features; Listening to the desired sequence (program playback)
HD-7/EN 30 Application Various CD playback features Listening to the desired sequence (program playback) It is possible to listen to selected tracks from a disc in the desired order. (Max. 32 tracks) Set the source CD in advance to stop status. ) Remote control unit only 1 Press the "P.MODE"...
Page 31 - To add a track to an existing program
HD-7/EN 31 Application To add a track to an existing program 1 Select the track number to beadded with the numeric keys. 2 Press the "SET" key. Remote control unit only 1 2 4 5 6 7 8 9 0 +10 3 SET ÷ Up to 32 tracks can be programed. When"PGM FULL" is displayed, no more trackscan be p...
Page 32 - Repeated playback; Repeat playback of programmed tracks
HD-7/EN 32 Application You can repeatedly listen to a favorite track or disc. 1 track repeat ............ The selected track will be repeated. All repeat ................... The entire disc will be repeated. Repeated playback Set the source CD in advance to stop status. ) Press the "REPEAT" ...
Page 33 - Repeated random playback
HD-7/EN 33 Application The tracks can be played back in random order. Listening in random order (random mode) Set the source CD in advance to stop status. ) Press the "random" key ("RANDOM key) dur-ing playback or stop. Remote control Main unit Each press switches the mode. 1 "RANDOM...
Page 35 - Clock adjustment
HD-7/EN 35 Application As the clock is not only used to show the time ofthe day but also used in timer operations, be sureto set the clock in advance. Clock adjustment If you have made a mistake during the setting, start again from step 1 . 1 Select "TIME ADJUST ?" as follows. 1 Press the &#...
Page 36 - Timer operation; To cancel
HD-7/EN 36 Application Timer operation Sleep timer (SLEEP) The unit is turned OFF automatically after thespecified period has elapsed. Timer playback(PROG. 1, PROG. 2) ‡ Playback of the selected input source of the CD,TUNER or AUX input starts at the specified time. AI timer playback (PROG. 1, PROG....
Page 37 - ecution of the programed timer.
HD-7/EN 37 Application Setting the timer program (PROG. TIMER) In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can beprogram and set to be activated or deactivated. ÷ Two timer settings can be reserved inde-pendently in two programs PROG.1 andPROG.2. ÷...
Page 38 - Make the desired reservation
HD-7/EN 38 Application 5. Set the OFF time. 1 Turn the "volume/multi control" knob toadjust the "hour" setting. When "hour" has set, press the "set" key. 2 Turn the "volume/multi control" knob toadjust the "minute" setting. When "minute" has se...
Page 39 - When timer operation is not desired
HD-7/EN 39 Application 8. Put the unit in standby mode. ÷ The standby/timer indicator lights green. ÷ The SLEEP timer cannot be used when thetimer function is being used for playback. ÷ When the time has not been set, the timerfunction cannot be used. ÷ The timer function will not operate when thesa...
Page 40 - Knowledge; Important Items; Note related to transportation and movement; Maintenance; Maintenance of the unit; Caution on condensation; Memory backup function
HD-7/EN 40 Knowledge Important Items 1 Remove the CD from the unit. 2 Press the CD 6 key. 3 Wait for some time and verify that the dis-play appears as above. 4 Wait a few seconds and turn the unit OFF. Note related to transportation and movement Before transporting or moving this unit, carry outthe ...
Page 41 - Disc handling precautions; Handling; Discs which can be played with this unit; Cleaning
HD-7/EN 41 Knowledge Disc handling precautions Handling Do not attach paper or tape to eitherthe playing side or the label side of thedisc. If there are fingerprint marks or foreignmatter found on the disc, lightly wipethe disc with a soft cotton cloth (or simi-lar) from the center of the disc outwa...
Page 42 - In case of difficulty; Operation to reset; Amplifier section/Speakers
HD-7/EN 42 Knowledge In case of difficulty What seems to be a malfunction is not always so. Before calling for service, check the following tableaccording to the symptom of your trouble. Operation to reset The microcomputer may fall into malfunction (impossi-bility to operate, erroneous display, etc...
Page 43 - Tuner section; CD player
HD-7/EN 43 Knowledge Tuner section For the U.S.A. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to...
Page 44 - Specifications
HD-7/EN 44 Application Specifications [Amplifier section] (For U.S.A. and Canada)Rated output power during STEREO operation (FTC) (For U.K. and Europe)Effective output power during STEREO operation (1 kHz, 10% T.H.D., at 6 Ω ) ................. 35 W + 35 W Rated output power during STEREO operation ...
