Kenwood 467FM - Manual - manualsarea.com

Page 2 - English; Contents

— 2 — English Contents Before use Warning .........................................................................................3Safety Precautions ........................................................................4Handling Compact Discs ........................................................

Page 3 - Location : Rear Panel; FCC WARNING; CAUTION; equipment and receiver.; NOTE; Warning

— 3 — Use of controls or adjustments orperformance of procedures other than thosespecified herein may result in hazardousradiation exposure. In compliance with Federal Regulations,following are reproductions of labels on, orinside the product relating to laser productsafety. Location : Rear Panel FC...

Page 4 - Cleaning the Unit; Safety Precautions; Reset button

— 4 — English Take the following precautions to preventfire and avoid personal injury: • When extending the ignition wire, battery wire, or ground wire, use 0.75mm 2 (AWG18) or larger automotive grade wire to avoid wiredeterioration or damage to the covering. • Check that no metal objects (coins, to...

Page 5 - Loading and Replacing the Batteries:

— 5 — Safety Precautions Do not set the remote on hot places suchas above the dashboard. Loading and Replacing the Batteries: Use two "AAA" batteries.Slide the cover while pressingdownwards to remove it as illustrated.Insert the batteries with the + and – poles aligned properly, following th...

Page 6 - Handling Compact Discs

— 6 — English Handling Compact Discs Playing a CD that is dirty, scratched orwarped can cause the sound to skip andthe unit to operate incorrectly, resulting inworsened sound quality. Take thefollowing precautions to prevent your CDsfrom getting scratched or damaged. Handling CDs • Do not touch the ...

Page 7 - Loading Compact Discs; Projection; Magazine ejection

— 7 — ' ' ' ' Make sure the disc magazine is theright way up with the Kenwood logoon the top.Pull the tray out by theprojection. Insert the magazine into the CD changeruntil it clicks. Open the CD changer door. Place the disc on the tray with thelabel facing upwards. Insert the trayinto the disc mag...

Page 8 - To listen to the radio :; Playing CDs; Buttons; Display Unit; Operations

English Playing CDs: Press the PWR button.The power goes ON and the CD play start. When the unitreceives any signal from the remote controller, the mark lights up. When the player reaches the end of the last track on the discyou are playing, it will shift automatically to the first track onthe next ...

Page 9 - Direct Track Search; Function of Remote; Disc Search; Track Search

— 9 — Using the remote, directly input the track number that you wantto listen to. Using the number buttons on the remote, input the number ofthe track that you want to listen to.The selected track number will blink in the display for 10seconds.If you make no further input in the 10-second period, t...

Page 10 - Canceling Direct Disc Search While It Is Operating :; Direct Disc Search; Track Scan; Function of remote; Track Repeat; Repeat playing the disc currently being listened to.; Disc Repeat; Function of remote

— 10 — English Using the remote, directly input the disc number that you wantto listen to. Using the number buttons on the remote, input the number ofthe disc that you want to listen to.The selected disc number will blink in the display for 10seconds.If you make no further input in the 10-second per...

Page 11 - of discs loaded in the disc magazine.; Magazine Random Play; Random Play; Starting the disc scan:; Disc Scan

— 11 — Play the tracks on all the discs in the disc changer in randomorder. Press the M.RDM button to switch magazine random play onand off.The M.RDM indicator lights up when magazine random play isturned on.The disc and track numbers will change over and over in thedisplay as the next track is bein...

Page 12 - To set the frequency change mode; Changing the Transmission Frequency

— 12 — English To set the frequency change mode Press the REP button for at least three seconds. The FREQindicator will light up and the currently set frequency will bedisplayed. • The initial value is 88.3MHz.• If this function is on, the functions other than power on / off, reset, and modulation l...

Page 13 - Dynamic control; To set the control mode; Modulation level / Dynamic control; Modulation level

— 13 — Dynamic control The unit comes with the prevention of distortion function toreduce sound distortion.If the sound is distorted severely, press the + button on the display unit and then set the function to "2" (ON). If theprevention of distortion function is set to "2" (ON), the...

Page 14 - Accessories; External view; Removing the transportation screws; Installation Procedure

— 14 — English Accessories .........1 1 .........4 2 .........4 3 .........1 4 External view ......... Number of items The use of any accessories except for those provided might resultin damage to the unit. Make sure only to use the accessoriesshipped with the unit, as shown above. 2 CAUTION When dr...

Page 16 - Installation; Use the holes marked (; Horizontal installation; Bottom view

Installation Use the holes marked ( ¶ ) to install the unit. Use the holes marked ( ¶ ) to install the unit. Horizontal installation ■ Vertical installation ■ Bottom view Side view KDC-C517FM 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 45 0

Page 17 - Installation of Display unit; • Be sure not to place the unit on such place as where it is

Installation Installation of Display unit ■ • Installation without using the trim mount plate 7 Attach one velcro to theslanted-line of the the displayunits as shown above, andattach the other velcro to theparts where you wish toattach the display units.Then, put velcros togetherand install the disp...

Page 18 - Troubleshooting guide; SOLUTION

— 18 — Troubleshooting guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Beforecalling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Power button is not turned ON. Turn the power button...

Page 21 - Disc section; MHz; General; Weight; Specifications subject to change without notice.

Disc section Laser Diode.....................................................GaAlAs ( λ =780 nm) Digital Filter (D/A) ......................................8 Times Over SamplingD/A Converter .........................................................................1 bitSpindle speed ....................

Kenwood 467FM - Manual

Table of Contents:

Summary

Other Kenwood Models