Page 2 - Table of Contents; Please carefully read and save these instructions; Disclaimer of implied warranties limitation of remedies
All rights reserved. Printed in the USA. 2 Table of Contents Please carefully read and save these instructions ............................... 2Kenmore Limited Warranty ..................................................................... 2 Before Setting Surface Controls ..............................
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Read all instructions before using this appliance.; DEFINITIONS; Tip Over Hazard
Save these instructions for future reference. 3 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Pay attention to these symbols and follow all instructions given.Do not attempt to install or operate your ...
Page 6 - IMPORTANT INSTRUCTIONS FOR
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. 6 • Always handle oven racks when the oven is cool. Place oven racks in desired positions while the oven is cool. if a rack must be moved while the oven is hot, use extreme ...
Page 7 - Before Setting Surface Controls; Using proper cookware
7 Before Setting Surface Controls Using proper cookware The size and type of cookware used will influence the radiant element power level setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware shown on this page. Cookware material types The cookware ...
Page 8 - Types of cooktop surface elements
8 Before Setting Surface Controls Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently. Do not place plastic items such as salt and pepper shakers, ...
Page 9 - Setting Surface Controls; Settings
9 Setting Surface Controls Setting Surface Controls Radiant surface element settings The suggested settings below are based when cooking with medium-weight aluminum pans with lids. Settings may vary when using other types of pans. Suggested settings for single and dual (some models) radiant surface ...
Page 10 - Dual radiant surface element (some models)
10 Setting Surface Controls Dual radiant surface element (some models) To operate the dual radiant element: 1. Place correctly sized cookware on single radiant surface element. 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer portions of the element. I...
Page 12 - Before setting oven controls; Oven vent location; Air circulation in the oven; oven vent location
12 Before setting oven controls Oven vent location The oven vent is located under the left side of the control panel ( Figure 6 ). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent:...
Page 13 - Oven Controls; Setting Clock
13 Oven Controls 1. Bake - Selects Bake function. 2. Broil - Selects Broil function. 3. Self Clean - Use to select 2, 3, or 4hr Self-Clean cycle. 4. Warm & Hold - Use to keep cooked food warm and at serving temperature for up to 3 hours. 5. Oven Lock - Use to lock oven door and oven functions . ...
Page 14 - Oven Lock
14 Oven Controls Changing Temperature Display (ºF or ºC) The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or ºC (Celsius) oven temperatures. To change temperature display mode from °F to °C or from °C to...
Page 15 - Setting Bake
15 Oven Controls Setting Bake Use the bake function whenever the recipe calls for baking using normal temperatures. A reminder tone will sound when the set bake temperature is reached. Bake may be programmed for any temperature from 170°F to 550°F (77°C to 288°C). The factory preset bake temperature...
Page 16 - Setting Cook Time
16 Oven Controls Setting Cook Time Use Cook Time to set the amount of time needed for baking. The oven will turn on immediately and stop automatically after the set cook time ends. FOOD POISONING HAZARD . Do not let food sit for more than one hour before or after cooking. Doing so can result in food...
Page 17 - Setting Broil
17 Oven Controls Setting Broil Use the broil function to cook meats that require direct exposure to flame heat for optimum browning results. The Broil function is factory preset to broil at 550°F. The suggested broil settings are recommendations only. Increase or decrease broiling times, or move to ...
Page 18 - Operating Oven Light
18 Oven Controls Warm & Hold™ Warm & Hold will keep cooked foods warm and ready for serving for up to 3 hours after cooking has finished. After 3 hours the Warm & Hold will shut off automatically. Warm & Hold should only be used with foods that are already at serving temperatures. Wa...
Page 19 - Self Clean; Read before starting Self Clean
19 Oven Controls Self Clean A self cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils com-pletely or reduces them to a fine powdered ash you can wipe away afterwards with a damp cloth. The Self Clean function allows you to select 3 diffe...
Page 20 - Setting Self Clean; When Self Clean is finished:; Delayed Start Self Clean:
20 Oven Controls Setting Self Clean To set Select Clean to start immediately: 1. Be sure the oven in empty and all oven racks are removed. Remove all items from the cooktop. Be sure the oven door is completely closed. 2. Press Self Clean. 3:00 appears in the display, indicating the default 3 hour cl...
Page 21 - Care and Cleaning; Cleaning Various Parts of Your Oven; Surface Type
21 Care and Cleaning Cleaning Various Parts of Your Oven Before cleaning any part of the oven, be sure all controls are turned off and the oven is cool. Remove spills and any heavy soiling as soon as possible. Regular cleaning will reduce the difficulty of major cleaning later. Surface Type Recommen...
Page 22 - Removing and Replacing the Oven Door; roller
22 Care and Cleaning Removing and Replacing the Oven Door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove the oven door: 1. Open oven door completely, horizontal with floor (See Figure 14 ). 2. Pull the door hinge locks on both lef...
Page 23 - Replacing the oven light
23 Care and Cleaning Replacing the oven light Be sure the oven is unplugged and all parts are cool before replacing oven light. The interior oven light is located at the rear of the oven cavity. (See Figure 18 ). To replace the oven interior light bulb: Important note: Use a paper towel or cotton gl...
Page 24 - Before You Call; Oven Baking; Baking Problems and Solutions
24 Before You Call Oven Baking For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your pre...
Page 25 - Solutions to Common Problems; Problem
25 Before You Call Solutions to Common Problems Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the problem listed: Problem Solution Poor baking results Many factors effect baking results. Use proper oven rack position. C...
