Page 2 - TABLE OF CONTENTS; PRODUCT RECORD; • “No-lemon” guarantee; PROTECTION AGREEMENTS
2 TABLE OF CONTENTS PRODUCT RECORD Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; READ ALL INSTRUCTIONS BEFORE USE; For your safety, the information in this manual must be followed to; clothes dryer airflow and increase the risk of fire.; WHAT TO DO IF YOU SMELL GAS:; If you cannot reach your gas supplier, call the fire department.; Your safety and the safety of others is very important.; obey all safety messages.; SAVE THESE INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING: DANGER: WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. • Do not install a c...
Page 4 - CALIFORNIA SAFE DRINKING WATER AND; follow basic precautions, including the following:
4 IMPORTANT SAFETY INSTRUCTIONS • Read all instructions before using the dryer. • Before use, the dryer must be properly installed, as described in this manual. • Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that...
Page 5 - SAFETY INSTRUCTIONS FOR INSTALLATION
5 • Properly ground dryer to conform with all governing codes and ordinances. Follow details in the installation instructions. Electrical shock can result if the dryer is not properly grounded. • Before use, the dryer must be properly installed as described in this manual. Electrical shock can resul...
Page 7 - FEATURES AND BENEFITS; KEY PARTS AND COMPONENTS
7 FEATURES AND BENEFITS KEY PARTS AND COMPONENTS EASY-TO-USE CONTROL PANEL Rotate the cycle selector knob to select the desired dry cycle. Add cycle options or adjust settings with the touch of a button. TIME AND STATUS DISPLAY The easy-to-read LED display shows cycle status and estimated time remai...
Page 8 - INSTALLATION INSTRUCTIONS; KEY DIMENSIONS AND SPECIFICATIONS; Special Electrical Requirements for Mobile or; CLEARANCES; Additional instructions for closet installations:; Closet Door Vent Requirements
8 INSTALLATION INSTRUCTIONS KEY DIMENSIONS AND SPECIFICATIONS LOCATION REQUIREMENTS IMPORTANT: Read all installation instructions completely before installing and operating your dryer. It is important that you review this entire manual before installing and using your dryer. It contains detailed ins...
Page 9 - INSTALLATION WITH OPTIONAL PEDESTAL BASE OR STACKING KIT
9 INSTALLATION INSTRUCTIONS INSTALLATION WITH OPTIONAL PEDESTAL BASE OR STACKING KIT OPTIONAL ACCESSORIES IMPORTANT: If you are installing your dryer using an optional pedestal base or stacking kit, refer to the instructions included with the accessory. Required Dimensions for Installation with Pede...
Page 10 - CONNECTING GAS DRYERS
10 INSTALLATION INSTRUCTIONS CONNECTING GAS DRYERS GAS REQUIREMENTS (GAS MODELS ONLY) To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: WARNING: • Gas supply requirements: As shipped from the factory, this d...
Page 11 - Connecting the Gas Supply; All connections must be in accordance with local
11 To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: • Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Failure to do so can result in fire, explosion...
Page 13 - • A 4-wire connection is required for all; Three-Wire Power Cord
13 CONNECTING ELECTRIC DRYERS (continued) Connect the power cord to the terminal block. Connect each power cord wire to the terminal block screw that has the same colored wire. For example, connect the black power cord wire to the terminal block screw with the black wire. Failure to follow these ins...
Page 15 - Routing and Connecting Ductwork; must; Connecting the Dryer Vent
15 VENTING THE DRYER (continued) Routing and Connecting Ductwork Follow the guidelines below to maximize dryer performance and reduce lint buildup and condensation in the ductwork. NOTE: Transition duct (from dryer to wall) and fittings are NOT included and must be purchased separately. • Use 4 inch...
Page 16 - LEVELING THE DRYER; THE DRYER DOOR IS VERY LARGE AND HEAVY.
16 INSTALLATION INSTRUCTIONS LEVELING THE DRYER REVERSING THE DOOR SWING • Wear gloves during installation. • Failure to follow these instructions can result in injury.To ensure that the dryer provides optimal drying performance, it must be level. To minimize vibration, noise, and unwanted movement,...
Page 17 - FINAL INSTALLATION CHECK
17 INSTALLATION INSTRUCTIONS FINAL INSTALLATION CHECK Once you have completed the installation of the dryer and it is in its final location, confirm proper operation with the following steps and tests. Is gas turned on? (Gas models only) Is dryer plugged in? Dryer should always be plugged into the p...
Page 18 - HOW TO USE; CONTROL PANEL FEATURES
18 HOW TO USE CONTROL PANEL FEATURES POWER (ON/OFF) BUTTON Press to turn the dryer ON or OFF. Pressing the POWER button during a cycle will cancel that cycle and any settings will be lost. CYCLE SELECTOR KNOB The cycle selector knob is used to select the desired dry cycle by rotating the knob in eit...
Page 19 - OPERATING THE DRYER
19 LOAD THE DRYER Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care. CLEAN THE LINT FILTER If the lint filter has not already been cleaned, lift out the filter and remove the lint from ...
Page 20 - CYCLE GUIDE; UT; CERTIFIED BY NSF; Auto Dry Cycles
20 The cycle guide below shows the available options and recommended fabric types for AUTO DRY cycles. *NOTE: The default time and actual time will vary depending on the size of the load and moisture content. NOTE: To protect your garments, not every dry level, or option is available with every cycl...
Page 21 - Timed Dry Cycles; LESS TIME buttons to rapidly change the time.; TIMED DR
21 Timed Dry Cycles Use Timed Dry cycles to select a specific amount of drying time and the drying temperature. When a TIMED DRY cycle is selected, the display shows the actual time remaining in your cycle.You can change the actual time for the cycle by pressing MORE TIME or LESS TIME. Press and hol...
Page 22 - CHECK THE LINT FILTER BEFORE EVERY LOAD
22 Fabric Care Labels Most articles of clothing feature fabric care labels that include instructions for proper care. Group Similar Items For best results, sort clothes into loads that can be dried with the same drying cycle.Different fabrics have different care requirements, and some fabrics will d...
Page 23 - TIME AND STATUS DISPLAY
23 TIME AND STATUS DISPLAY The Time and Status Display shows the cycle time, cycle progress, and vent status. When the dryer is turned on, the display will illuminate. TIME DISPLAY When a cycle is selected, the display will indicate the default time for that cycle including selected options or adjus...
Page 24 - CYCLE MODIFIER BUTTONS; TEMP
24 Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modifier buttons. AUTO DRY cycles are designed to properly care for specific fabrics and loads. As a result, not all settings are available for each cycle selection. TIMED DRY cy...
Page 25 - To recall a MY CYCLE:; DAMP DRY SIGNAL
25 CYCLE OPTIONS AND SPECIAL FEATURES Your dryer features several additional cycle options and special features to meet your individual needs. For all steam features, see the following pages. WRINKLE GUARD Selecting this option will tumble the clothes after the cycle ends for a few seconds every few...
Page 26 - IMPORTANT NOTES ABOUT STEAM FUNCTIONS:; Using the STEAM REFRESH cycle
26 Using the STATIC SHIELD option This option uses steam late in the drying cycle to reduce the static electricity caused by dry fabrics rubbing together. Change the steam time by pressing the MORE TIME and LESS TIME buttons to display the approximate number of articles in the load: 7, 9, 11, 14, 16...
Page 27 - IMPORTANT NOTES ABOUT STEAM CYCLES
27 STEAM FEATURES (continued) Lift out the steam feeder. Before using a steam cycle, the steam feeder must be filled with water up to the MAX line; make sure that the drawer is completely closed. If the steam feeder runs out of water, the ADD WATER light will blink. If the light blinks, turn the dry...
Page 28 - USER MAINTENANCE INSTRUCTIONS; REGULAR CLEANING; To remove lint between cycles:; Cleaning the Exterior
28 USER MAINTENANCE INSTRUCTIONS REGULAR CLEANING WARNING: To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety Instructions, before operating this dryer. • Unplug the dryer or turn the power off before cleaning to avoid the risk o...
Page 29 - Maintaining the Exhaust System
29 USER MAINTENANCE INSTRUCTIONS • DIRTY OR DAMAGED EXHAUST DUCTS • WRONG VENT MATERIAL • RESTRICTED OR DAMAGED VENT HOOD • EXCESSIVELY LONG VENT • THE USE OF PLASTIC OR FOIL VENTING Maintaining the Exhaust System Vent ducts should be checked for lint buildup and cleaned at least once per year. If a...
Page 30 - HOLD
30 Kenmore Connect ™ System HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by the call center, no more than one inch from (but not touching) the machine. NOTE: Do not press any other buttons or turn the cycle selector knob. PUSH and hold the TEMP button while conti...
Page 31 - BEFORE CALLING FOR SERVICE; TROUBLESHOOTING GUIDE; Problem
31 BEFORE CALLING FOR SERVICE TROUBLESHOOTING GUIDE Problem Possible Cause Solutions *CHECK VENT is blinking Exhaust system is too long or has too many turns/restrictions.Partial blockage of the ductwork due to lint buildup or other foreign object. Install a shorter or straighter duct run. See the I...
Page 32 - Clothes take too long to
32 BEFORE CALLING FOR SERVICE (continued) Problem Possible Cause Solutions Clothes take too long to dry Exhaust ducts are blocked, dirty, or duct run is too long. Load is not properly sorted. Large load of heavy fabrics. Dryer controls are not set properly. Lint filter needs to be cleaned. House fus...
Page 33 - Display shows error
33 BEFORE CALLING FOR SERVICE (continued) TROUBLESHOOTING GUIDE Problem Possible Cause Solutions Display shows error code: tE1 or tE2 Temperature sensor failure. Turn off the dryer and call for service. Lint on clothes Lint filter not cleaned properly. Laundry not sorted properly. Excess static in c...
Page 34 - Kenmore Elite Limited Warranty; to arrange for free repair.; Disclaimer of implied warranties limitation of remedies; exclusions or limitations may not apply to you.; Sears Brands Management Corporation, Hoffman Estates, IL 60179; WARRANTY
34 Kenmore Elite Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME ® to arrange for free repair. If this...
Page 35 - NOTE
