Page 2 - environmental tip; refrigerant warning; Congratulations
2 Contents Kelvinator Air Conditioning Congratulations and thank you for choosing our Inverter split system room air conditioner. We are sure you will find your new air conditioner a pleasure to use. Before you use the air conditioner, we recommend that you read through the entire user manual, which...
Page 3 - Safety instructions; How to properly use and maintain your air conditioner; warning; This symbol indicates always do this
warning Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer. Do not store the appliance in a room with continuously operating ignition sources (for example open flames, an operating electric heater or an operating gas appliance with a c...
Page 4 - Prior to Operation; Usage; caution
4 Impor tant safety instruc tions Kelvinator Air Conditioning Prior to Operation 1 Contact an installation specialist for installation.2 Plug in the power plug properly.3 Do not use a damaged or non-standard power cord.4 Do not share the same outlet with other appliances.5 Do not use an extension co...
Page 5 - Indoor unit; Product Description; Air inlet
Kelvinator Air Conditioning Produc t description 5 Indoor unit Outdoor unit Product Description 1. Front panel2. Digital display3. Air filter (behind the dust filter)4. Pre-dust filter5. Horizontal louvres6. Vertical louvres7. Manual control button8. Remote control9. Remote control holder 10. Refrig...
Page 6 - Indoor display unit; Replacing batteries; NOTE: Do not dispose batteries as unsorted municipal; tips and information; Remote control; Location of the remote control
6 Indoor display unit Kelvinator Air Conditioning Indoor display unit • When the remote control sends out a signal, the symbol will blink for about 1 second on the display of the remote control. caution • The air conditioner will not operate if curtains, doors or other materials block the signals fr...
Page 7 - NOTE: The I fEEl feature is not available under; NOTE: Cooling Only models have no HEAT mode.
Kelvinator Air Conditioning Using the remote control 7 6 X-FAn Function Press the X-FAn button to activate the X-FAN function. After the unit is turned off, the indoor fan will continue to operate for 10 minutes to remove all moisture from the indoor unit and prevent bacteria and mildew from growing...
Page 8 - NOTE: The Cool model does not offer a Heating option.; Remote control display indicator
8 Using the remote control Kelvinator Air Conditioning 8 TIMER On/OFF Display Displays when the Timer On/Off function is activated. 9 FAn SPEED Display Displays the selected fan speed in the following sequence: lOW MEDIUM HIGH and AUTO. In Auto speed, only the symbol is displayed. 10 SWInG Display D...
Page 9 - Using the remote control; Automatic operation; Start; Stop; First use
Kelvinator Air Conditioning Using the remote control 9 1 Ensure the unit is plugged in and power is available.2 Be sure the batteries are inserted correctly in the remote control (the lights on the remote control will be on). 3 Set the time with the CONTROl buttons and confirm by pressing the ClOCK ...
Page 10 - The temperature cannot be set through the remote control; Dehumidifying operation
10 Operating the air conditioner Kelvinator Air Conditioning When you select the FAN operating mode the air conditioner will recirculate the indoor air.1 ON/OFF Button Press this button to turn the air conditioner on. The temperature indicator on the indoor unit display lights up. 2 MODE Button Pres...
Page 11 - • The clock timer uses a 24 hour clock mode.; Setting the clock
Kelvinator Air Conditioning Operating the air conditioner 11 1 2 Before you start operating the air conditioner, set the clock on the remote control using the following instructions. The clock panel on the remote control will display the time regardless of whether the air conditioner is in operation...
Page 12 - Timer settings
12 Operating the air conditioner Kelvinator Air Conditioning Timer-Off Operation (Timer Stop Operation) This function is recommended when you want the unit to be turned off automatically (e.g. bedtime). The air conditioner will automatically stop operating at the set time. Example: It is 6:00 PM and...
Page 13 - Cooling; I FeeL function
Kelvinator Air Conditioning Operating the air conditioner 13 Press ECO button in COOl or HEAT (if applicable) mode, the air conditioner will automatically increase (in COOl mode) or decrease (in HEAT mode) 1ºC per hour for 2 hours. The set temperature will be steady for the next 5 hours then the uni...
Page 14 - Additional options; How to use the indoor unit
14 Operating the air conditioner Kelvinator Air Conditioning Range Up and down airflow To adjust the horizontal (left/right) airflow direction manually • Always perform these adjustments while the unit is turned off as fingers coming into contact with the fan may be injured. • Adjust the vertical lo...
Page 15 - Operating temperature ranges; Optimal Operation; emergency operation
Kelvinator Air Conditioning Operating the air conditioner 15 Operating temperature ranges Indoor side DB/WB°C Outdoor side DB/WB°C Maximum Cooling 32/23 43/26 Minimum Cooling 21/15 21/- Maximum Heating 27/- 24/18 Minimum Heating 20/- -7/-8 The operating temperature range (outdoor temperature) for co...
Page 16 - Item; Indoor unit and remote control cleaning; NOTE: Supply power must be disconnected before cleaning; Maintenance
16 Maintenance Kelvinator Air Conditioning A clogged air filter reduces the cooling efficiency of this unit. Please clean the filter every month or more often if necessary.1 lift the front panel of the indoor unit until it stops with full support of the bracket. panel bracket 2 Hold the dust filter ...
Page 17 - General maintenance
Kelvinator Air Conditioning Cleaning the air filters 17 General maintenance If the air conditioner is not going to be used for a long period of time:• Operate in fAN only mode for 3~4 hours to allow the unit to completely dry out. • Switch off the unit and pull out the power plug.• Remove the batter...
Page 18 - Operating tips
18 Operating tips Kelvinator Air Conditioning noises coming from the air conditioner • You may hear a low hissing sound when the compressor is running or has just stopped running. This is the sound of the refrigerant flowing or coming to a stop. • You also may hear a low “squeak” sound when the comp...
Page 19 - • If an error code appears on the display window of the; Troubleshooting; Problem; normal function of the air conditioner
Kelvinator Air Conditioning Troubleshooting 19 • fuse blows frequently or circuit breaker often trips.• Water or other liquid is splashed into the unit.• Water is leaking from the unit.• There is a harsh sound during operation.• Strong odours are emitted during operation.• Power cord and power plug ...
Page 21 - Notes
Kelvinator Air Conditioning Notes 21 Problem Cause The unit does not operate The unit does not operate if it is turned on immediately after it is turned off. This is to protect theunit compressor. Please wait for about 3 minutes before turning the unit on again. Odours are emitted Some odours may be...
Page 23 - Warranty; Important Notice
Kelvinator Air Conditioning Warranty 23 This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appl...
