Kawasaki K10400-040 - Manual

Kawasaki K10400-040

Kawasaki K10400-040 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Note; Insert player and cushion into fairing pocket; require modification of the cushion or may be too large to fit; NOTICE; Do not operate the motorcycle without first closing and; NOTE; If using any media player that will not fit inside the cushion,; Removal of media player
  • Page 3 – Voyager Radio Accessory Instructions; Description: Intercom; Important Notice; Learn and observe all of the following rules below.
  • Page 4 – iPod Tuning; button to start playing that song.; iPod Browsing
Loading the manual

Installation Instructions

Assembly Instructions

Description:

iPod® Adapter Cable

MP3/Audio Adapter Cable

Model:

Vulcan 1700 Voyager

Part Number:

K10400-040

K10400-041

Approximate

Assembly Time:

15 min.

Before you begin installation, read through the installation instructions and check to be sure all parts are

present.
If you are in doubt as to any part of the installation, please ask your authorized Kawasaki dealer to

complete the installation. Please note that Kawasaki cannot assume any responsibility for damage

resulting from incorrect installation.

Parts List

Seq.

Description

Qty

1.

iPod® Adapter Cable (K10400-040 only)

1

2.

Cushion

1

3.

MP3/Audio Adapter Cable (K10400-041 only)

1

Installation

Install cable

z

Open left fairing pocket and locate the vehicle harness with

dual plug connectors. One plug is triangular 3-pin and the

other is square 4-pin.

z

Connect your adapter cable to the mating vehicle harness

connectors. You will use both connectors for an iPod adapter

cable and the 3-pin connector only for the MP3/media adapter

cable.

Attach cable

Connect your media player to the adapter cable as follows:

z

The iPod connects to the large flat receptor (Apple® refers to

this as a 30-pin dock connector) at the bottom of the device.

z

Insert the iPod charging module into the space provided in the

cushion.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Note; Insert player and cushion into fairing pocket; require modification of the cushion or may be too large to fit; NOTICE; Do not operate the motorcycle without first closing and; NOTE; If using any media player that will not fit inside the cushion,; Removal of media player

z All other audio devices connect to the round 3.5mm headphone or line out socket. Note o Be sure to adjust the media player volume level to at least a few steps below maximum output to ensure the signal going to the radio is not distorted. This will also help conserve battery life. Insert player an...

Page 3 - Voyager Radio Accessory Instructions; Description: Intercom; Important Notice; Learn and observe all of the following rules below.

Voyager Radio Accessory Instructions Description: Intercom iPod®/Aux Connectors XM Radio Model: Vulcan 1700 Voyager (all) Part-Number: K10400-027/028/032/035/036 K10400-040/041 K10400-038 These instructions supplement the above accessory installation instructions and Vulcan 1700 Voyager Owner’s Manu...

Page 4 - iPod Tuning; button to start playing that song.; iPod Browsing

]iPod® Adaptor (Accessory K104400-040) The optional iPod harness allows an iPod to be controlled through the Vulcan 1700 Voyager audio system. The display will show song and artist information from your iPod and allow you to select songs and play lists. The iPod battery is charged whenever the audio...

Other Kawasaki Models

All Kawasaki Other