Kawasaki 840442 - Manual
Kawasaki 840442 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 7 – REMOVING / ATTACHING BATTERY PACK
- Page 8 – BLADE CLAMP
- Page 9 – BUTTON
- Page 10 – OIL
- Page 12 – YEAR LIMITED HOME USE WARRANTY; This
19.2V BATTERY-OPERATED
RECIPROCATING SAW
INSTRUCTION MANUAL
BATTERIES AND
CHARGERS
SOLD SEPARATELY
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-800-590-3723
Printed in China
COMPONENT
#690088-UNISOURCE
™
MODEL 840442
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.
CONSUMER INQUIRES SHOULD BE DIRECTED TO:
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
690088_19.2V Black Cordless Reciprocating Saw_Rev 7/14/07
87-1904-60957
Conforms to Std. UL745-3,
UL745-4-11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
REMOVING / ATTACHING BATTERY PACK REMOVE BATTERY PACK: 1. Press both release buttons on either side of the CordlessReciprocating Saw torelease the battery pack. 2. Pull battery pack free of Cordless Reciprocating Saw. ATTACH BATTERY PACK: 1. Align the raised portion of the battery pack with the groo...
ATTACHING / REMOVING BLADE Failure to remove the battery pack from the saw before removing the blade could result in accidental starting and serious personalinjury. • Remove the battery pack. • Use the allen wrench to loosen the blade clamp screw on the side of the saw by turning it counter-clockwis...
• Put on eye protection. • Clear the saw of any foreign material. • Make sure the work piece is held securely in place. Hold smaller piecesin a vise or attach to the workbenchwith clamps. • Mark out the line to be cut so it is easily visible. • Pull the trigger to start the saw. • Set the shoe again...
