Kawasaki 840139 - Manual
Kawasaki 840139 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Failure to; TABLE OF CONTENTS
- Page 4 – FIGURE 1. CONNECTING THE DRILL PRESS TO THE AC POWER RECEPTACLE
- Page 5 – IMPORTANT SAFETY RULES FOR DRILL PRESSES
- Page 7 – That is, the sliding ruler and the adjustable; COMBINATION SQUARE; Assemblies
- Page 8 – FIGURE 3. ATTACHING SUPPORT LOCK AND
- Page 9 – THE HEAD ASSEMBLY
- Page 10 – THE DRIVE PULLEYS
- Page 11 – FIGURE 12. INSTALLING THE DRILL CHUCK
- Page 12 – INSERTING THE DRILL BIT; Using a vise or clamps, secure the workpiece to the table.; OPERATING THE DRILL PRESS
- Page 13 – FIGURE 14. INSERTING THE DRILL BIT
- Page 14 – SETTING THE DRILLING DEPTH ADJUSTMENT; Apply the AC power and turn the ON/OFF switch to the “ON” position.; ADJUSTING THE SPINDLE RETURN SPRING; of the head from the feed handles.; ROTATING THE WORKTABLE
- Page 16 – AVOID EXPOSURE; C A U T I O N; LASER RADIATION CAUTION LABEL
- Page 19 – YEAR LIMITED HOME USE WARRANTY; This
MODEL
#840139
13" DRILL PRESS
INSTRUCTION MANUAL
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-800-590-3723
Printed in China
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
840139 – 13" Drill Press - Rev. 5/30/06
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSERTING LASER BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33ACCESSORIES . . . . . ...
This drill press is equipped with a grounded 3-wire power cord with a 3-prong plug.If the power cord will not fit into the wall plug, an approved adapter can be used aslong as it is connected to the center screw in the wall plate. See Figure 1 and thesteps below to use an AC grounding adapter: 1. Re...
9. USE ONLY DRILL BITS, SANDING DRUMS, AND OTHER ACCESSORIES that are designed for the various speeds of this drill press. The drill bits, sandingdrums and other accessories should have a shank size 1/2" OR SMALLER. Unsuitable drill bits can break without warning throwing fragments outward athig...
