Kawasaki 840109 - Manual
Kawasaki 840109 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – FIGURE 1. CONNECTING THE BENCH GRINDER TO THE AC POWER RECEPTACLE
- Page 7 – INSTALLATION INSTRUCTIONS; of the Tool Rest (3) and reattach them to the Grinding Stone Guard.
- Page 8 – FIGURE 3. INSTALLING THE EYE SHIELD
- Page 9 – MAINTENANCE AND CLEANING; FIGURE 4. REPLACING GRINDING WHEEL
MODEL
#840109
6" BENCH GRINDER
INSTRUCTION MANUAL
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-800-590-3723
Printed in China
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
840109 – 6" Bench Grinder - Rev. 9/14/06
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
O
F
F
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EXTENSION CORD USAGE Extension cords are not recommended for use with this bench grinder. Extensioncords, if used, must be properly grounded with a 3-prong plug on one and a 3-holereceptacle on the other. DO NOT use grounding adapters with an extension cord. Extension cords must be UL listed and use...
INSTALLATION INSTRUCTIONS Do not begin assembly of bench grinder if the AC power cord is plugged into an AC power receptacle. Do not begin assembly of bench grinder if power switch on the front of thebase is switched to the “ON” position. INSPECTION: Carefully inspect each individual part of the ben...
OPERATING THE ON/OFF SWITCH The bench grinder “ON/OFF” switch is located on the front of the grinder base. Toturn the grinder “ON,” move the rocker-style switch to the right to the “ON” position. To turn the grinder “OFF,” move the rocker-style switch to the left to the “OFF” position. GRINDER OPERA...
