Kawasaki 840067 - Manual
Kawasaki 840067 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – JIGSAW COMPONENTS
- Page 6 – Blade Guard
- Page 7 – Do not force the jigsaw into the workpiece.; This could; for changing the blade. When cutting metal, clamp the; CUTTING WITH A STRAIGHTEDGE; Starter Holes
- Page 8 – BEVEL CUTTING
- Page 9 – YEAR LIMITED HOME USE WARRANTY
PORTABLE JIGSAW
INSTRUCTION MANUAL
MODEL
#840067
0
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FUNCTIONAL DESCRIPTION Disconnect the power plug from the AC power source before any assembly, adjustments, or adding/removing accessories. Following this preventative step reduces the risk of the saw coming on acciden-tally and the risk of damage to the workpiece and injury to the operator. Note: F...
JIGSAW OPERATION ADJUSTING SPEED The operating speed of the jigsaw canbe varied by using the Speed ControlSwitch located on the top of the jigsaw. Turn the speed control from0 to 6 to set the speed. On most cuts,such as wood and metal, the fasterspeed works best. On other materials,such as plastic o...
Do not force the jigsaw into the workpiece. This could cause the blade teeth to wear down with-out cutting or even cause the blade tobreak causing damage to the jigsaw or injury to the operator. Let the saw reachfull speed before engaging the workpiece. CUTTING WITH A STRAIGHTEDGE Whenever possible,...
