Kawasaki 840014 - Manual
Kawasaki 840014 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – CONTROLS AND COMPONENTS:
- Page 6 – USING THE PAD SANDER WITH THE DUST COLLECTION SYSTEM:; If there are no holes in the; OPERATING THE PAD SANDER; Remove components from carton and examine contents; INSTALLING THE SANDPAPER
- Page 7 – Hold the Pad Sander
- Page 8 – YEAR LIMITED HOME USE WARRANTY; This
MODEL
#840014
1/4 SHEET PALM-GRIP SANDER
INSTRUCTION MANUAL
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-800-590-3723
Printed in China
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
840014 – 1/4 Sheet Black Palm-Grip Sander_Rev 9/18/06
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. On/Off Switch2. Motor Housing3. Power Cord4. Dust Collector5. Bottom Backing Pad6. Sandpaper Clamp (2)7. Sandpaper Punch Plate ASSEMBLY The Pad Sander is assembled and ready for use. However, if using the DustCollection System, the Dust Collector mu...
USING THE PAD SANDER WITH THE DUST COLLECTION SYSTEM: In order to make full use of the Dust Collection System, the sandpaper must haveholes matching those in the Bottom Foam Pad. 1. If there are no holes in the sandpaper, install thesandpaper using theclamps on both ends ofthe Pad Sander. 2. Place t...
USING THE PAD SANDER: 1. Prepare the workpiece according to instructions in this manual. 2. Plug the sander into an approved power source. 3. Turn on the sander by depressing the ON/OFF switch on the front. 4. Hold the sander against the work- piece with a firm grip. 5. Sand the workpiece in a circu...
