Kawasaki 73690 - Manual

Parts Diagram D 1. Vehicle Body 2. Cowling 3. Seat 4. Wheel - 4 5. Hubcap - 4 6. Cap Nut - 6 7. Steering Column 8. Right Mudflap 9. 12 Volt Battery 10. Key Assembly 11. Microphone 12. Radio Knob - 2 13. Grip - 2 14. Top Handlebar Cover 15 Bottom Handlebar Cover 16. Fairing 17. Handlebar 18. Rear Axl...

Battery Charging E About Thermal Fuses Your Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resettingsafety device which automatically “trips” and shuts downoperation of the vehicle if the vehicle is overloaded or thedriving conditions too severe. ...

Battery Charging • Plug the charger connector into the battery . • Plug the charger into a standard 120 volt wall outlet . Note: If power flow to the wall outlet is controlled by aswitch, make sure the switch is “ON”.• Before first-time use, charge the battery for at least 18 hours. Never charge the...

Assembly • Position the vehicle body upside down. Note: The mudflaps are marked “R” and “L” to designateright and left. • With the “R” marking facing up, align the two round holes in the right mudflap with the pegs on the inside ofthe right fender. • Insert two #8 x 3 / 4 " screws through the ro...

Proper label application will help to keep the labels looking their best! When applying labels, keep the followingguidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Plac...

IMPORTANT! Use only a Power Wheels ® 12 volt battery with built-in thermal fuse. Use of any other battery willdamage your vehicle. Make sure that you charge the batteryfor at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the firsttime. Charge the ...

Teach Safety Rules to Children While children can quickly develop the skill necessary todrive this vehicle, it is important to remember that theirjudgment skills are still very immature. Unsuperviseddriving by children can lead to serious injury. Beforechildren use this vehicle, an adult should care...

• Make sure the shifter is in the LOW SPEED position. • Press the foot pedal. The vehicle will drive forward at a maximum of 2 1 / 2 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forwardin low speed. • Your vehicle has a patented, electr...

IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. • Make sure the shifter is in the HIGH SPEED position. • Press the foot pedal. The vehicle will drive forward at a maximum of 5 mph. • Help your child practice steering to learn how far an...

Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and SolutionsGuide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday...

Problems and Solutions Guide Problem Possible Cause Solution When the foot pedal is pressed Operation of vehicle in low speed It is possible that only one rear wheel may spin when both only one rear wheel spins rear wheels are raised off the ground and the vehicle is in low speed. This does not nece...

If you are missing parts or need assistance, please call us toll-free: Power Wheels ® Consumer Relations 1-800-348-0751 8 AM - 6 PM EST, Monday through Friday. Over 400 Authorized Service Centers Or contact your local Power Wheels ® Authorized Service Center. For the location nearest you, refer to t...