Page 3 - Table of Contents
Page 3 ¡ Important Safety Instructions ..............4 1. PART NAMES AND FUNCTIONS .......8 FRONT PANEL ............................................................ 8 PEDALS ....................................................................... 8 HEADPHONES ......................................
Page 4 - Important Safety Instructions; Examples of Picture Symbols; CAUTION; RISK OF ELECTRIC SHOCK; AVIS : RISQUE DE CHOC ELECTRIQUE; WARNING; SAVE THESE INSTRUCTIONS
Page 4 Important Safety Instructions denotes that care should be taken.The example instructs the user to take care not to allow fingers to be trapped. denotes a prohibited operation.The example instructs that disassembly of the product is prohibited. denotes an operation that should be carried out.T...
Page 5 - Do not lean against the keyboard.
Page 5 The product is not completely disconnected from the power supply even when the power switch is turned off. If the product will not be used for a long time,unplug the AC power cord from the AC outlet. Do not disassemble, repair or modify the product. ! This product may be equipped with a polar...
Page 7 - Declaration of Conformity; user’s authority to operate the equipment.
Page 7 ) ,) $* ( - ,- ,+ )(, ,) Declaration of Conformity Products : Electronic Piano Model Number : CN33 Responsible Party Name : Kawai America Corporation Address : 2055 East University Drive Rancho Dominguez, CA 90220 Telephone 310-631-1771 This device complies with Part 15 of the FCC Rules. Oper...
Page 8 - PEDALS; PART NAMES AND FUNCTIONS; FRONT PANEL
Page 8 1 P A R T NAMES AND FUNCTIONS PEDALS The CN33 piano has three pedals: Damper/Sustain, Sostenuto, and Soft. ¡ Damper/Sustain pedal Sustains the sound after hands are lifted from the keyboard. The sustain pedal is capable of responding to half pedaling. ¡ Sostenuto pedal Depressing this pedal...
Page 9 - HEADPHONES AND USB CONNECTORS
Page 9 1 P A R T NAMES AND FUNCTIONS HEADPHONES AND USB CONNECTORS ¡ Headphone jack (x 2) There are two headphone jacks located on the left underside of the piano. Up to two pairs of headphones can be connected simultaneously. For information on attaching the headphone hook, please refer to the ...
Page 10 - PLAYING THE PIANO; SETTING UP THE PIANO; Press the POWER SWITCH to turn on the power.
Page 10 2 PLA YING THE PIANO 2. PLAYING THE PIANO 1) BASIC OPERATIONS This section provides the basic procedures for turning the power on and playing the CN33 digital piano. SETTING UP THE PIANO The CN33 digital piano is equipped with stereo speakers and an internal amplifier—no addition equipment ...
Page 11 - Press the CONCERT MAGIC and LESSON buttons simultaneously.
Page 11 2 PLA YING THE PIANO 2) DEMO SONGS The internal demonstration songs provide an excellent introduction to the varied capabilities of the CN33 digital piano, presenting the instrument’s rich selection of voices. There are 30 built-in demo songs, each presenting a musical piece to introduce the...
Page 12 - ) SELECTING A SOUND; Press the ELECTRIC PIANO button.
Page 12 2 PLA YING THE PIANO 3) SELECTING A SOUND The CN33 digital piano features 36 realistic sounds suitable for various musical styles, with multiple sounds assigned to each of the 9 category buttons listed below. Button Instrument name PIANO 1 Concert GrandStudio GrandMellow GrandModern Piano PI...
Page 13 - Press and hold the PIANO1 button, then press the STRINGS button.
Page 13 2 PLA YING THE PIANO 4) DUAL MODE The DUAL function allows two internal sounds to be layered together, creating a more complex sound. For example, a piano can be layered with strings, or a church organ with a choir sound.
Step 1 Press and hold the PIANO1 button, then press the STRINGS butt...
Page 14 - Press any individual SOUND SELECT button to deactivate DUAL mode.
Page 14 2 PLA YING THE PIANO
Step 5 Use the BALANCE slider to adjust the volume balance between the two sounds.
Step 6 Press any individual SOUND SELECT button to deactivate DUAL mode. Increases the volume of the sound assigned to the leftmost selected SOUND button Increases the volume of the so...
Page 15 - Press the SPLIT button.; Press and hold the SPLIT button, then press a key on the keyboard.
Page 15 2 PLA YING THE PIANO 5) SPLIT MODE The SPLIT function divides the keyboard of the CN33 digital piano into Upper and Lower sections, allowing each section to be played with a different sound.
Step 1 Press the SPLIT button. The LED indicator for the SPLIT button will turn on, indicating that...
Page 16 - Press the PIANO2 button three times.
Page 16 2 PLA YING THE PIANO
Step 4 Press the PIANO2 button three times. The LED indicator for the PIANO2 button will turn on. ‘1-3’ will be shown in the LED display, indicating that the Upper section sound has been changed to Mellow Grand 2.
Step 5 Press and hold the SPLIT button, then press th...
Page 18 - Press the SOUND SELECT buttons to adjust the Upper section sound.; Press the SPLIT button again to deactivate FOUR HANDS mode.
Page 18 2 PLA YING THE PIANO
Step 3 Press the SOUND SELECT buttons to adjust the Upper section sound.
Step 4 Press and hold the SPLIT button, then press the SOUND SELECT buttons to adjust the Lower section sound.
Step 5 Press and hold the SPLIT button, then press a key on the keyboard to adjus...
Page 19 - ) REVERB AND EFFECTS; ADDING REVERB; Press and hold the REVERB button, then press the
Page 19 2 PLA YING THE PIANO 7) REVERB AND EFFECTS The CN33 digital piano allows performers to alter sounds by adding reverb and applying effects. When selecting some internal sounds, the LED indicators for the EFFECTS or REVERB buttons may turn on automatically. This is because certain internal sou...
Page 20 - APPLYING EFFECTS; Press and hold the EFFECTS button, then press the; Press the EFFECTS button again to deactivate the effects.
Page 20 2 PLA YING THE PIANO APPLYING EFFECTS Effects alter the impression and feeling of the sounds. There are seven types of effect available: Effect type Description Chorus Simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version of the sound over...
Page 21 - Press and hold the TRANSPOSE button, then press the
Page 21 2 PLA YING THE PIANO 8) TRANSPOSE The TRANSPOSE function allows the audible pitch of the CN33 digital piano to be raised or lowered in half steps. This is particularly useful when accompanying instruments with different tones, or when a song learned in one key must be played in another key. ...
Page 22 - STARTING THE METRONOME
Page 22 2 PLA YING THE PIANO 9) METRONOME Rhythm is one of the most important elements when learning music. It is important to practice playing the piano at the correct tempo and with a steady rhythm. The CN33 digital piano’s metronome function helps learners to achieve this by providing a steady be...
Page 23 - ADJUSTING THE METRONOME VOLUME
Page 23 2 PLA YING THE PIANO
Step 2 Press the S or T VALUE buttons to select the desired time signature. The currently selected time signature will be shown in the LED display.
Step 3 Press the BEAT button again to deactivate the metronome. The LED indicator for the BEAT button will turn off, in...
Page 24 - Press the CONCERT MAGIC and USB buttons simultaneously.
Page 24 2 PLA YING THE PIANO 10) PANEL LOCK The Panel Lock function allows the state of all panel buttons to be temporarily locked, preventing sounds and other settings from being changed accidentally while playing the piano.
Step 1 Press the CONCERT MAGIC and USB buttons simultaneously. The CN33 ...
Page 25 - SELECTING A SONG; Press the PLAY/STOP button again to finish listening to the song.
Page 25 3 CONCER T MA GIC 3. CONCERT MAGIC The great German composer Johann Sebastian Bach once said “Playing the keyboard is simple. Just strike the right keys at the right time”. Many pianists wish it were quite that straightforward. Fortunately, KAWAI have devised a method of playing the keyboard...
Page 26 - PERFORMING A SONG; Tap out the rhythm of the selected song on any black or white key.; CONCERT MAGIC PART VOLUME BALANCE; Use the BALANCE slider to adjust the volume balance.
Page 26 3 CONCER T MA GIC PERFORMING A SONG
Step 1 Tap out the rhythm of the selected song on any black or white key. Concert Magic songs will respond to changes in playing style. As the keys are tapped harder, the music will grow louder; if the keys are tapped more softly, the music will become...
Page 27 - CONCERT MAGIC SONG ARRANGEMENT TYPES
Page 27 3 CONCER T MA GIC CONCERT MAGIC SONG ARRANGEMENT TYPES After playing with Concert Magic for a while, performers may feel that such playing is too easy and that there is very little to learn. While it is true that some of the songs are very easy to play, even for beginners, there are also s...
Page 28 - STEADY BEAT; Press and hold the CONCERT MAGIC button.; CONCERT MAGIC DEMO MODES
Page 28 3 CONCER T MA GIC STEADY BEAT Steady Beat allows Concert Magic songs to be played by simply tapping any key with a constant steady beat, regardless of the song arrangement type.
Step 1 Press and hold the CONCERT MAGIC button. The currently selected Concert Magic mode will be shown in the...
Page 29 - CONCERT MAGIC PLAYBACK SPEED
Page 29 3 CONCER T MA GIC CONCERT MAGIC PLAYBACK SPEED The TEMPO button is also used to adjust the playback speed of Concert Magic songs.
Step 1 After selecting a Concert Magic song to play back, press and hold the TEMPO button. The current tempo will be shown in the LED display.
Step 2 While ...
Page 31 - ) LISTENING TO AND PLAYING A SONG; EXITING THE LESSON FUNCTION
Page 31 4 LESSON FUNCTION 2) LISTENING TO AND PLAYING A SONG
Step 1 Press the PLAY/STOP button to play the selected song. There will be a one bar count-in before the song starts to play. Press the PLAY/STOP button to stop and reset the song. If the PLAY/STOP button is pressed again, the song will ...
Page 32 - ) RECORDING A SONG PRACTICE; PLAYING BACK THE RECORDING; Press the PLAY/STOP button to listen to the recording.; ERASING THE RECORDING
Page 32 4 LESSON FUNCTION 3) RECORDING A SONG PRACTICE While in Lesson mode, song practice can be recorded for playback and self-evaluation. The pre-recorded left and right-hand parts will be heard while the song practice is recorded. As noted previously, the BALANCE slider may be used to mute eithe...
Page 34 - Start to play the piano.; RECORDING A SECOND PART
Page 34 5 RECORDER
Step 2 Start to play the piano. The recorder will automatically start recording with the first note played. During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on. Any changes made to the sound while recording will also be recorded. The recording...
Page 35 - Press the PLAY/STOP button to finish recording.
Page 35 5 RECORDER
Step 2 Start to play the piano. While recording the second part, the previously recorded first part will also play. During this time, the LED indicators for the REC button and PLAY/STOP button will be turned on. To start playing back the first part and then recording the second pa...
Page 36 - ) PLAYING BACK A SONG; Press the PLAY/STOP button to start playing the recorded song.; PLAYING BACK RECORDED PARTS SEPARATELY
Page 36 5 RECORDER 2) PLAYING BACK A SONG The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which song and part is played.
Step 1 Press the PLAY/STOP button to start playing the recorded song. Press the PLAY/STOP button again to stop playback. To sele...
Page 37 - Press and hold the REC and PLAY/STOP buttons.
Page 37 5 RECORDER 3) ERASING A SONG This function allows any songs that are no longer listened to, to be cleared.
Step 1 Press and hold the REC and PLAY/STOP buttons. The LED indicators will display which songs have been recorded.
Step 2 While holding the REC and PLAY/STOP buttons, select the d...
Page 38 - After connecting a USB device, press the USB button.
Page 38 6 USB OPERA TIONS 6. USB OPERATIONS The CN33 digital piano allows recorder songs to be loaded from and saved to a USB memory device.It is also possible to play songs directly, delete files, and to format the USB memory device. 1) USB PLAY The USB Play function is used to play songs directly f...
Page 42 - Press the
Page 42 6 USB OPERA TIONS 5) USB FORMAT The Format function allows a USB memory device to be formatted, erasing all stored data.
Step 1 After connecting a USB device, press the USB button.
Step 2 Press the S or T VALUE buttons to select the USB Format function, then press the YES button.
Step ...
Page 43 - ENTERING A FUNCTION MODE; EXITING A FUNCTION MODE; Press any of the panel buttons shown below.
Page 43 7 FUNCTION B UTT ONS 7. FUNCTION BUTTONS The function settings are responsible for controlling various advanced parameters within the CN33 digital piano, and can be selected by pressing a combination of buttons. ENTERING A FUNCTION MODE
Step 1 Press and hold the TRANSPOSE and USB buttons...
Page 44 - ) LOWER OCTAVE SHIFT
Page 44 7 FUNCTION B UTT ONS 1) LOWER OCTAVE SHIFT This function allows the lower part to be raised by one, two, or three octaves when using SPLIT mode.
Step 1 Press and hold the TRANSPOSE and USB buttons, then press the CONCERT MAGIC button. The display will alternate between showing ‘Lot’ (Lower...
Page 53 - KEY SIGNATURE OF TEMPERAMENT
Page 53 7 FUNCTION B UTT ONS
Step 2 Press the S or T VALUE buttons to change the type of temperament. When the power is turned off, the temperament will reset to the factory default ‘equal temperament (piano only)’ type. If a piano sound is selected when using the factory default ‘equal temperamen...
Page 54 - MIDI OVERVIEW; CN33 MIDI functions
Page 54 7 FUNCTION B UTT ONS MIDI OVERVIEW The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting synthesizers, sequencers (MIDI recorders) and other electronic instruments so that they can exchange performance data. The CN33 is equipped with...
Page 61 - 5) SEND PROGRAM CHANGE NUMBERS
Page 61 7 FUNCTION B UTT ONS 15) SEND PROGRAM CHANGE NUMBERS This function allows the CN33 digital piano to send program change numbers beyond the 32 pre-defined numbers transmitted by the SOUND SELECT buttons. Using this function, any number from 1 to 128 can be sent.
Step 1 Press and hold the TRA...
Page 62 - Press the REC button to execute the save operation.
Page 62 7 FUNCTION B UTT ONS 16) USER MEMORY This function allows the CN33 digital piano to save the user-definable settings when the power is turned off. Once written to the memory, the saved settings will be recalled every time the power is turned on. The following settings can be saved. ¡ Sound ty...
Page 63 - Press the REC button to restore factory settings, and exit the menu.
Page 63 7 FUNCTION B UTT ONS 17) FACTORY RESET This function will appear only when the user memory function has been used. This function resets the CN33 digital piano to the factory settings. All parameters you saved in ‘User Memory’ will be reset to the factory preset values.
Step 1 Press and hol...
Page 64 - CONNECTING TO OTHER DEVICES; Caution
Page 64 8 APPENDICES 8. APPENDICES CONNECTING TO OTHER DEVICES 1 MIDI JACKS These jacks are used to connect external MIDI devices with the CN33 digital piano. There are two terminals: MIDI IN and MIDI OUT. 2 USB JACK This jack is used to connect with a personal computer and exchange MIDI data. Whe...
Page 65 - USB MIDI
Page 65 8 APPENDICES USB MIDI The CN33 digital piano features a ‘USB to Host’ type connector, allowing the instrument to be connected to a computer and utilised as a MIDI device. Depending on the type of computer and operating system installed, additional driver software may be required for USB MI...
Page 66 - ASSEMBLY INSTRUCTIONS
Page 66 8 APPENDICES ASSEMBLY INSTRUCTIONS PARTS PROVIDED Before attempting to assemble the CN33 digital piano unit, ensure that all parts are included. A Phillips-head screwdriver will also be required to assemble the unit (not included). (A) Piano (x 1) (B) Pedal board (x 1) (C) End panel (x 1...
Page 68 - SPECIFICATIONS
Page 68 8 APPENDICES SPECIFICATIONS Keyboard 88 keys, Responsive Hammer Action with Ivory Touch and Let-Off Polyphony Max. 96 notes Number of Sound 36 Sound Categories Piano 1, Piano 2, Electric Piano, Drawbar, Church Organ, Harpsi & Mallets, Strings, Choir & Pad, Bass Effects Re...
Page 69 - MIDI EXCLUSIVE DATA FORMAT
Page 69 8 APPENDICES MIDI EXCLUSIVE DATA FORMAT 1 F0 ..........................Start code 2 40...........................KAWAI’s ID number 3 00 - 0F ...................MIDI channel 4 10, 30.....................Function code (30 when setting MULTI TIMBRE ON/OFF) 5 04...........................Indic...
Page 70 - MIDI IMPLEMENTATION CHART
Page 70 8 APPENDICES MIDI IMPLEMENTATION CHART Mode 1: omni mode On, Poly, Mode 2: omni mode On, Mono Mode 3: omni mode Off, Poly, Mode 4: omni mode Off, Mono { : Yes ° : No Function Transmit Receive Remarks Basic channel DefaultChanges 1 1 - 16 1 1 - 16 Mode DefaultMessagesAltered 3 ° ÄÄÄÄÄÄÄÄÄ 1...
