Kathrein UFS 700si - Manual

7 RECEIVER FEATURES/SCOPE OF SUPPLY - UFS 700si (silver) or UFS 700sw (black) - Remote control RC 660 - Scart cable - 2 Batteries AAA 1.5 V - Power supply cable - Operating manual PRODUCT PACKAGE The UFS 700si and UFS 700sw receivers are suitable for receiving FTA digital satellite TV and radio prog...

8 CONTROLS, DISPLAYS AND CONNECTIONS This section provides a brief description of all the controls, displays and connections. Front panel controls and displays 1. On/Off switch (with mains disconnect)2. TV/R button for switching between TV and radio mode 3. Channel select buttons ( ▼▲ ) Rear panel c...

9 CONNECTION AND SET-UP The following section is intended specifi cally for specialist dealers. You only need read this section if you are performing the installation yourself. The “Connection Examples” section provides a sample confi guration.Do not connect the unit to the mains until all installat...

10 CONNECTION AND SET-UP Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection Example”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.Use a further Scart cable to connect the satellite receiver (VCR/Scar...

11 REMOTE CONTROL Sound on/off ... Switch on/input digits for channels, timer etc. Call up Main Menu, exit the menu and return to the TV picture (red) Call up favorites selection ! (green) “Current” view in the EPG % Volume Exit menu step by step Changing channel in the programme guide (EPG) Transpa...

12 The RC 660 remote control supports up to four devices (which are supplied with the RC 660 as standard) as well as the receivers of the UFD 5xx (not UFD 552, 554, 558) and UFD 4xx families. First switch all receivers off (at the power switch). To confi gure a receiver to an infrared code: Switch o...

13 FIRST INSTALLATION: General Before using your unit for the fi rst time, read the “Safety Instructions” and “Connection and Setup” sections. The “Connection examples” section provides a sample confi guration. Do not connect the unit to the power supply until all installation work has been properly...

18 FIRST INSTALLATION: SIMPLE LNB Satellite and position Use the buttons to select the desired satellite whose signal is to be received by the tuner. When you have selected your desired satellite, use the buttons to switch to the selection of the “LNB Type”. LNB Type Here use the buttons to select t...

30 Execute Channel search Use the buttons to select (yes or no) whether you wish to start a channel search. It is not essential to start a channel seach; instead you can use the factory pre-programmed channels. However the channels do change from time to time (e.g. their frequencies change), which t...

31 Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour). Use the buttons to switch to the “Automatic clock change” fi eld. Use the buttons to select whether the receiver should automatically change over to and from summer and winter time...

32 OPERATING INSTRUCTIONS The structure of the menu concept is based on logical operating sequences. The programme showing on the current selected channel always appears in the top right-hand corner of the screen. You will fi nd detailed descriptions of the selected menu items in the relevant sectio...

33 MENU TREE OPERATING INSTRUCTIONS Main Menu Call up the Main Menu by pressing the button

34 OPERATING INSTRUCTIONS The language for the on-screen display is set as follows: → → Language Setting → → → English → Available options: German, English, Italian, French, Dutch, Spanish, Czech and Turkish. After you have performed the settings, press the or the button to exit the Main Menu. You w...

35 ON-SCREEN DISPLAYS (OSD) Channel information is shown for a few seconds each time the channel is changed (this can be changed under “Settings”, “Adjust Displays”) or displayed continuously by pressing the button. The information for the current radio channel has the same layout. Press the button ...

38 EPG - ELECTRONIC PROGRAMME GUIDE CALLING UP THE EPG The EPG is called up by pressing the button. Each time the EPG is called up, you will automatically be shown the “Current” view, irrespective of which view you were shown the last time you exited the EPG. The following display appears (example):...

39 EPG - ELECTRONIC PROGRAMME GUIDE Selection options: - (red) button Calls up the plan recording (display of all pre-programmed recordings) - button Jump the “Current” view forwards by 15 minutes - " (yellow) button Call up a preview of the currently highlighted channel - # (blue) button Call u...

41 EPG - ELECTRONIC PROGRAMME GUIDE CATEGORIES VIEW The “Categories” view can be called up at any time in EPG by pressing the # (blue) button. In the “Categories” view you can see all programmes sorted by category and starting time.The following categories are available for selection: Movies, Series...

42 SEARCH FUNCTION The search function can be called up at any time in EPG by pressing the button. The search function allows you to search for programmes based on their additional information or their name. Use the keypad to input the desired search expression (see also “Operating Instructions” “Al...

45 EPG - ELECTRONIC PROGRAMME GUIDE RECORD ONCE Use the buttons to select the recording mode “once” (see screenshot item “Recording (Timer)”). Use the buttons to switch to the selection fi eld “Date” and use the buttons to select the desired recording date. Use the buttons to switch to the selection...

46 RECORD WEEKLY Use the buttons to select the recording mode “weekly” (see screenshot below). Use the buttons to switch to the selection fi eld “Start” and use the buttons or the numeric pad to select the desired recording starting time. Use the buttons to switch to the selection fi eld “End” and u...

47 Use the buttons to switch to the selection fi eld “End” and use the buttons or the numeric pad to select the desired recording ending time. When all settings have been made, press the button to save the recording settings. You can view the recording in the Timer List view of the EPG (see item “Pl...

48 EPG - ELECTRONIC PROGRAMME GUIDE PLAN RECORDING The “Timer List” view can be called up at any time in EPG by pressing the (red) button. The timer list view shows you all the recordings that are scheduled. The buttons allow the recordings to be sorted into “once-only recording” or “Repeating” reco...

50 EDIT CHANNEL LIST Select the “Edit TV-Channellist” menu using the menu button , the buttons on the main menu and . Press the button to close the information display for editing channels and channel lists. When the menu is called up, the standard setting is for the receiver to show the “All Satell...

51 EDITING LISTS/CHANNELS When you have selected the channel or channel list to be edited, press the (red dot) button to call up the edit menu. You have the following edit options: - Move: Channel can be moved within the current list to another channel slot - Delete: Delete the channel from the curr...

52 DELETE CHANNELS Use the buttons to select the channel to be deleted from the current channel list. Press the button to call up the edit menu and use the buttons to select the “Delete” function. Confi rm the command by pressing the button. EDIT CHANNEL LIST SKIP CHANNELS Use the buttons to select ...

54 EDIT CHANNEL LIST EDIT FAVORITES LISTS When you have selected the Favorites List to be edited (called up using the (red) button and selected using the buttons), press the (red dot) button to call up the edit menu. You have the following edit options: - Remove from the Favorites List: The channel ...

60 Press the button. You will be asked whether you wish to save the changes or not. Selection is performed using the buttons and is confi rmed using the button. If you select “Yes, save changes”, the newly found channels will be added to the end of the channel list. Then press the button to exit the...

62 PARENTAL CONTROL Select the “Parental control” menu using the menu button , the buttons on the main menu and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the PIN using the numeric keypad you are shown the following display: Select the parameters to ...

63 Press the button to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat the new PIN code once again. Confi rm the change of PIN code by pressing the button. DEFINE NEW PIN CODE PARENTAL CONTROL Keep your password in a safe place, so that you always hav...

64 SETTINGS The selected menus, sub-menus and positions, as well as the parameters to be set, are each highlighted in colour. The menus are to a large extent self-explanatory. Pay attention to the bar at the bottom of the on-screen display. These provide information on what to do next. Select the “S...

65 Here you can use the buttons to select the type of video signal at the TV Scart socket. Select the signal that your TV set can process. When doing this, refer to the operating instructions for your TV set! • CVBS – Composite colour baseband signal (colour/picture/blanking/synchronization signal) ...

66 Here you can use the buttons to select the type of video signal at the VCR Scart socket. Select the signal that your external recorder can process. When doing this, refer to the operating instructions for your recorder! • CVBS – Composite colour baseband signal (colour/picture/blanking/synchroniz...

67 SETTINGS Use the buttons to select the time after which you want the on-screen channel notifi cation display to be automatically cancelled. The options available are “Off”, 1, 2, 3, 4, 5 or 6 seconds. CHANNEL OSD DURATION Use the buttons (On/Off) to specify whether the volume bar is displayed whe...

68 SETTINGS DATE AND TIME ANTENNA CONFIGURATION See “First Installation” section, pages 14ff Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour). Use the buttons to switch to the “Automatic clock change” fi eld. Automatic clock change U...

69 SERVICE MENU Select the “Service” menu using the menu button , the buttons on the main menu and . The following display appears: Current software version Last update run UPDATE SOFTWARE Hardware version Date of the channel list Use the buttons to select from the displayed options and press to con...

71 RESTORE FACTORY DEFAULT SETTINGS Select the “Service” menu using the menu button , the buttons on the main menu and . Use the buttons to switch to “Restore factory default settings” and to call them up press the button. The following display appears: Press the button to load the factory default s...

72 CONNECTING UP THE VIDEO/PVR For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder. In order to make a PVR recording (Record), the satellite receiver must be switched on...

73 USING THE FRONT PANEL If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver from the front panel. BACKUP OPERATION There are three buttons on the front of the receiver. TV/R button: Pressing the TV/R button switches the receiver from TV mode...

74 TECHNICAL APPENDIX FEATURES ¹ ) Only displayed if this information is broadcast by the channel provider Reception of digital TV and radio satellite programmes 4,000 channel memory positions 4-character display Kathrein Convenience EPG with timer programming ¹ ) Suitable for software download via ...

76 Signal Pin no. TV VCR/AUX Right audio output 1 X X Right audio input 2 X Left audio output 3 X X Audio earth 4 X X Blue earth 5 X X Audio left input 6 X Blue signal 7 X X Switching voltage 8 X X Green earth 9 X X Data signal 10 Green signal 11 X X Data signal 12 Red earth 13 X X Data earth 14 Red...

77 Scart Scart Digitalton AC 3elektrisch CONNECTION EXAMPLE TECHNICAL APPENDIX Dolby Digital system Digital audio AC 3electrical Cinch Scart Cinch Scart PVR (VCR) Hi-fi system

78 EXAMPLES Single-cable systems TECHNICAL APPENDIX EXR 501/551/552 Single-cable switching matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 11/KAZ 12 Sat IF 4 x single or 2 x twin receivers

79 TECHNICAL APPENDIX UAS 481 Single-cable feed system * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 11/KAZ 12

80 TECHNICAL APPENDIX EXR 1581/2581 Single-cable matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 11/KAZ 12 Sat IF

82 SHORT TECHNICAL GUIDE DISEQC™ DiSEqC™ (Digital Satellite Equipment Control) is a communication system between a satellite receiver (master) and the peripheral satellite components (slaves), such as LNBs, multi-switches, rotating antenna systems.It is a single master/multi-slave system, i.e. there...

84 SHORT TECHNICAL GUIDE AC 3 Output for Dolby Digital signal Audio output Sound output on the receiver AV programme pos. Preferred programme position on TV set for Scart input CA Conditional Access (for decoding of encrypted programmes) CI Internationally standardised interface for CA modules Decod...

85 TROUBLESHOOTING In the event of a malfunction, fi rst check all the cable connections and operating states:1. Receiver and TV set power plugs are connected to the wall socket2. Antenna cables are located on the receiver input3. Receiver and TV set correctly interconnected by a Scart or cinch cabl...

86 SERVICE If, despite studying this operating manual, you still have questions about getting started with the unit or using it correctly, or if unexpected problems occur, please contact your specialist dealer.