Page 3 - Enjoy the reception quality and your new DVB-T receiver.; Important Notices
Preface 3 Preface Dear Customer, These operating Instructions will help you make optimum use of the many functions of your new DVB-T receiver. We have made the operating instructions as easy as possible to understand, and as short as possible. For environmental protection, we have equipped a power s...
Page 5 - Front View
Views and Connections 5 3 Views and Connections Front View 1) Operation/Stand-by key 2) Programme-selection keys 3) Programme display Rear View 1) TV antenna input socket 2) TV antenna input (looped-through signal) 3) RS 232 data interface for serial data transmission during maintenance service (onl...
Page 7 - Functions of the Remote Control; TXT
Remote Control 7 Functions of the Remote Control 1) POWER: switching on and stand-by mode 2) Numeric keypad (0-9): For entering programme numbers or menu parameters 3) QUALITY/P-: Displays the DVB-T signal level of the current programme. Also used for the antenna alignment and for paging (-) in list...
Page 8 - Using the Remote Control; OK; Inserting Batteries in the Remote Control
Remote Control 8 Using the Remote Control You can use the OK key to confirm the individual settings in the menus or to call up sub-menus. Change each setting line by line, and confirm the entry by pressing the OK key. Press EXIT key to leave the menu, or change from a sub-menu to ist respective main...
Page 10 - First Installation; keys to change
Operation 10 Operation First Installation When you have connected your receiver properly, switch it on using the power switch on the rear of the unit. You will see the following: Now select the language in which you would like to see the menu by using the / keys. If you use a DVB-T indoor antenna (e...
Page 11 - key to call up the list of existing programmes.; You may also call up the programme list by pressing the; FAV; keys. When you press the; EXIT
Operation 11 Programme Selection (TV and Radio) The receiver is preassigned for the most common programmes. Your terrestrial antenna must accurately aligned to achieve proper reception. Press the OK key to call up the list of existing programmes. Select the programme using the / keys, and press the ...
Page 12 - Programme Information; The name of the programme; Videotext
Operation 12 Programme Information When you change to another channel, the following information is displayed at the bottom of the screen: - The type of programme: TV or Radio (indicated by an icon) - The name of the programme - EPG (Electronic Programme Guide) reception, indicated by the letter ”E”...
Page 13 - The; EPG; (Electronic Programme Guide) key can be used to call up; blue; key. The timer will then; red
Operation 13 Electronic Programme Guide (EPG) The EPG (Electronic Programme Guide) key can be used to call up the programme information, if broadcast by the programme provider. You can switch to the desired programme by pressing either or . For automatical programming, press the blue key. The timer ...
Page 14 - Audio
Operation 14 You can also obtain detailed information directly from the current programme, using the red key. You will then see a display of the desired data about the current TV programme without having to switch to EPG mode first (see illustration). To switch to the next or previous day, press the...
Page 15 - Pause and Zoom; Quality
Operation 15 Pause and Zoom You can use these keys to make the picture smaller, or to switch to freeze image. The Quality Key (Auxiliary function for antenna adjustment) In addition to the display showing strength and quality of reception, the receiver has also an auxiliary function with an acoustic...
Page 16 - Press the
Main Menu 16 Main Menu Calling up the Main Menu (MENU key) Press the MENU key to call up the main menu, select the desired sub- menu, and press the OK key. There are five sub-menus available, which are explained below: 1) Timer Menu for setting time-delayed recording or automatic stop 2) Edit Channe...
Page 17 - Organising Programmes and Favourites; key to call up the sort functions. When you exit the; key in the “Programme Organisation” menu, and then; green
Main Menu 17 Organising Programmes and Favourites Sorting: Press the red key to call up the sort functions. When you exit the menu, the receiver prompts you for password confirmation. Attention! When sorting has been confirmed, access to the previous lists is no longer possible. Favourites: Press th...
Page 18 - Setting the Timer (Automatic Programming); key in the “Channel” field. The; key
Main Menu 18 Setting the Timer (Automatic Programming) Note: The timer can also be programmed with the Electronic Programme Guide (EPG). See Page 14. The clock must be set correctly in order that the timer is ready for operation (see Installation Menu). Programme the Timer Number (1 to 8), activate ...
Page 19 - Locking access to the menu and changing the password
Installation Menu 19 Installation Menu Adjusting the receiver to your receiving installation: 1) Antenna alignment Select 5 V power supply (On/Off) for the antenna 2) Scan Auto Scan (overall search), Net Scan (network search), TP Scan (specific channels) and PID Scan (search for one specific program...
Page 20 - Antenna Type
Installation Menu 20 Antenna Type Note: Should you use a DVB-T indoor antenna (e.g. Kathrein BZD 30, visible in the background), it must receive a power supply of 5 V. If the antenna has its own power supply, the default setting of 5 V AUS (inactive) must be retained. Setting Up a Channel Although t...
Page 21 - Mute
Installation Menu 21 In this menu, you can carry out the programme search. 1) AutoScan All channels in the range of 177 MHz to 858 MHz are searched for programmes. 2) Net Scan The entire network is searched for network information. (Results only if this information is transmitted with the programmes...
Page 22 - System Configuration; Setting Languages; your settings with the
Installation Menu 22 System Configuration This menu allows the adaptation of your receiver to your audio-visual surroundings, or the reset to the factory settings: Setting Languages Access to language selection. The following menu languages are available: German, Spanish, Italian, Czech and English....
Page 23 - Setting TV; Select the various colours and display parameters with the /
Installation Menu 23 Setting TV Selection of video output standard (PAL, NTSC, SECAM, AUTO), screen format type (4/3 or 16/9) and the output signal which can be obtained at the TV output: CVBS: composite colour video signal RGB: separate signals for red/green/blue Note: The selection of the screen f...
Page 24 - Clock Parameters; time and date manually, with the numeric keypad.
Installation Menu 24 Clock Parameters Date and time must be programmed in order that the receiver indicates the correct information messages when you use the timers, and in the information messages mode (and on the front in stand-by mode). The internal clock can be set as follows: a) The transmitted...
Page 25 - System Information; key and enter
Installation Menu 25 System Information Display of the hardware and software versions of the receiver. Factory Settings This menu is protected with the password “0000”. If you have changed the programming of the receiver and want to return it to the condition in which it was delivered, select this i...
Page 26 - Parental Lock; Keep
Installation Menu 26 Parental Lock In this menu, you can lock all menus to prevent inadvertent wrong setting. The receiver is delivered with the installation menu locked, but the other menus are not protected. For child protection, it is necessary to lock all the menus. Attention: Keep the password ...
Page 27 - Software Update; A PC and a null-modem cable are required for the update process!
Installation Menu 27 Software Update Attention: A PC and a null-modem cable are required for the update process! If new software for your DVB-T receiver should become available, you can download it from the following homepage: www.esc-kathrein.de/download/ There you will also find information and no...
Page 28 - Use the / keys in the main menu to select “Games” and press then
Games 28 Games Use the / keys in the main menu to select “Games” and press then OK . The following is then displayed: Choose one of the two games listed. Note: When you have selected a game, please follow the on-screen notes. All games are controlled with the keys shown below:
Page 29 - Tetris
Page 33 - UFE
DVB-T-Indoor-Antenne BZD 30 33 DVB-T-Indoor-Antenne BZD 30 The reception range of the antenna is 174-230 MHz in the VHF waveband, and 470-862 MHz in the UHF waveband. The BZD 30 has almost omnidirectional characteristics, so exact orientation is not necessary. Depending on how it is installed, both ...
