Page 3 - Your; Important Information
Preface 3 Preface Dear customer, This Operating Manual is intended to help you make the fullest use of the extensive range of functions offered by your new DVB-T receiver. We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible. The...
Page 5 - Front view
Views and Connections 5 Views and Connections Front view 1) Power/Standby button 2) Channel select buttons 3) Channel display Rear view 1) TV antenna input socket 2) TV antenna input (looped-through signal) 3) RS 232 data port for serial data transfer during service (only with special cable) 4) Scar...
Page 7 - Guide to the Remote Control; TXT
Remote Control 7 Guide to the Remote Control 1) POWER: Receiver standby and power-on 2) Number pad (0-9): To enter channel numbers or menu parameters 3) QUALITY/P-: Display of DVB-T signal level of current channel being received. Also used for antenna adjustment and scrolling (-) through the lists 4...
Page 8 - Using the Remote Control; OK; Inserting Batteries in the Remote Control
Remote Control 8 Using the Remote Control Press the OK button to confirm menu settings or to access lower menu levels. Change the settings line by line and confirm your input by pressing the OK button. Press the EXIT button to quit the menu or to switch from a submenu to the next highest menu level....
Page 10 - First Installation
Operation 10 Operation First Installation Once you have connected up your receiver in the correct way, turn it on at the power switch on the rear of the unit. The following screen appears: Select the menu language you want using the / buttons. If you are using a DVB-T indoor antenna (e.g. the BZD 30...
Page 11 - DVB-T does not currently broadcast radio programmes in Germany.; button to call up the list of pre-programmed channels.; You can also call up the channel list by directly pressing the; FAV; and; EXIT
Operation 11 Channel Selection (TV and Radio) The receiver is shipped with the most popular channels programmed in to it. For ideal reception your terrestrial antenna must be optimally aligned. Note: DVB-T does not currently broadcast radio programmes in Germany. Press the OK button to call up the l...
Page 12 - Channel Information; Channel type: TV or radio
Operation 12 Channel Information When you switch channels, the following information is displayed on-screen: - Channel type: TV or radio - The channel name - EPG (Electronic Programme Guide) reception is indicated by the letter "E" - Videotext (Teletext) reception is indicated by the letter ...
Page 13 - EPG
Operation 13 Electronic Programme Guide (EPG) The EPG (Electronic Programme Guide) button displays programme information, provided the information is transmitted by the programme provider. Use the / buttons to switch between the displayed programmes. To switch to the next/previous day, press the Rec...
Page 14 - red; Audio; Pause and Zoom
Operation 14 You can also view the details directly while the current programme is running by pressing the red button. You then see the information you need about the current TV programme without having to switch to EPG mode (see screenshot). Note: To be able to view the programme information you mu...
Page 15 - The Quality Button (Antenna Adjustment Help Function); Quality
Operation 15 The Quality Button (Antenna Adjustment Help Function) In addition to displaying the reception strength and quality, the receiver also features an audible-signal help function to aid in adjusting the antenna: Adjust the receiver to the channel you want to receive and press the Quality bu...
Page 16 - Press the
Main menu 16 Main menu Accessing the Main Menu (MENU Button) Press the MENU button to access the main menu. Select the submenu you want and press the OK button. Five submenus are available, as detailed below: 1) Timer Menu for preset programme recording or for automatic stop 2) Edit Channel List Sor...
Page 18 - Organising Channels and Favourites; Using the number pad on your remote, key in the number of the
Main menu 18 Organising Channels and Favourites Sort: 1. Press the "Menu" button to access the receiver's menu. 2. Choose "Edit Channel List" and press "OK" to confirm. 3. Then select the channel you want to move using the cursor buttons (the channel is highlighted in yellow)...
Page 20 - Antenna setting; Block menu access and password change; The receiver is pre-programmed and shipped with an installation
Installation Menu 20 Installation Menu Adapting the receiver to your reception system: 1) Antenna setting Antenna 5V supply (on/off) option 2) Scan Auto Scan (full scan), Net Scan (network scan), TP Scan (specific channels) and PID Scan (search for a specific channel by its PID). 3) System Setup Ada...
Page 21 - Antenna Type
Installation Menu 21 Antenna Type Note: If you are using a DVB-T indoor antenna (e.g. the BZD 30 from Kathrein), the antenna will need a 5 V supply. If the antenna has its own power supply, the default "5V OFF (inactive)" setting must be retained. Scan Although the receiver is pre-programmed...
Page 23 - System Configuration; Language Settings; button to confirm your
Installation Menu 23 System Configuration Language Settings Access to the language menus: The following menu language options are available: German, Spanish, Italian, Czech and English. You can also select your preferred languages for audio and subtitles here. Use the / and / buttons. Press the OK b...
Page 24 - TV Settings
Installation Menu 24 TV Settings Select the video output standard (PAL, NTSC, SECAM, AUTO), screen mode (4:3 or 16:9) and output signal at the TV output: CVBS: composite colour video signal RGB: Individual signals for Red/Green/Blue Note: Selection of the screen mode (4:3 or 16:9) always depends on ...
Page 25 - Time Settings; b) If you select «Off» in the first field, you will need to enter the
Installation Menu 25 Time Settings The time and date must be programmed to enable the receiver to display the correct information in information messages and for operation of the timer (as well as on the front panel in Standby mode). The internal clock is set as follows: a) Apply the broadcast time ...
Page 26 - System Information; button and key in
Installation Menu 26 System Information Display of the receiver's hardware and software versions. Factory Reset This menu is protected by the default password "0000". If you have changed the receiver's programming and want to reset it to its original setup when shipped, select this line. Pre...
Page 27 - Parental Control; To activate the parental control you need to lock all the menus.
Installation Menu 27 Parental Control In this menu you can lock all the menus to prevent incorrect settings from accidentally being made. To activate the parental control you need to lock all the menus. Important: If you change the password, be sure to make a note of it. If you forget your password ...
Page 28 - Software Update; Updating requires a PC and a null-modem cable!
Installation Menu 28 Software Update Important: Updating requires a PC and a null-modem cable! If there is a new software release for your DVB-T receiver, you can download it from: www.esc-kathrein.de/download/ The website also provides information and tips on software updating via the receiver's RS...
Page 30 - Tetris
Page 34 - KATHREIN Euroline
DVB-T indoor antenna BZD 30 34 DVB-T indoor antenna BZD 30 The antenna's reception range is 174-230 MHz in the VHF band and 470-862 MHz in the UHF band. As the BZD 30 is virtually omni-directional, no special alignment is required. Depending on the mode of installation, both vertical and horizontal ...
