Page 2 - Warnings, Cautions and Others; Caution: Proper Ventilation
CAUTIONTo reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet.2. Do not expose this appliance to rain or moisture. G-1 Warnings, Cautions and Others Front view Side view 1 cm 15 cm 15 cm 15 cm 10 cm 1 cm 15 cm 15 cm AX-UXG6 TD-UXG6 XT-UXG6R XM-G6 AX-UXG6 TD-U...
Page 4 - Precautions; Installation; We would like to thank you for purchasing one of our JVC products.; Introduction
1 Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold — between 5˚C (41˚F) and 35˚C (95˚F). • Install the unit in a location with adequate ventilation to prevent internal heat built-up in the units. • Leave sufficient distance between the unit and a TV....
Page 5 - Contents
2 Introduction .......................................................... 1 Welcome to XM-G6 ............................................................. 1Precautions ........................................................................... 1 Contents ................................................
Page 6 - Location of the Buttons and Controls; MiniDisc Recorder; Become familiar with the buttons and controls on the unit.; 9 p q w e r t y
3 REC PAUSE SAMPLING RATE CONVERTER 1 4 5 6 7 2 3 REC Location of the Buttons and Controls XM-G6 MiniDisc Recorder Buttons behind the Sliding Panel Become familiar with the buttons and controls on the unit. DISPLAY/CHARA. PLAY MODE REC MODE TITLE /EDIT CLOCK/TIMER CANCEL ENTER SET 8 9 p q w e r t y ...
Page 7 - Front Panels; MiniDisc Recorder XM-G6
4 • You can also use the buttons on the remote control if they have the same or similar names (or marks) as those onthe units.If operation using the remote control is different fromthat using each unit, it is then explained. Concerning with the remote controlRefer to the Instructions supplied with U...
Page 8 - Getting Started; Unpacking
5 When connecting the XM-G6 MD recorderMake sure to turn off UX-G6R and unplug the ACpower cord. Leave it until all the connectionscomplete. DO NOT place XM-G6 unit or any otherequipment onto AX-UXG6 stereo amplifier unit.Damage or malfunction may result from heatgenerating portion of AX-UXG6. 1 Tur...
Page 9 - Connecting Another Digital Audio Equipment; Now you have finished installation to UX-G6R system.
6 Connecting Another Digital Audio Equipment For digital audio recording onto an MD, XM-G6 unitconnected to UX-G6R system has one more optical digitalterminal (OPTICAL DIGITAL IN for AUX), prepared foran external digital audio output equipment. When connecting another digital equipmentMake sure to t...
Page 10 - Playing Back an MD; • When using the remote control, press MD; Playing Back the Entire MD — Normal Play; Insert an MD into the MD loading slot.
7 • Make sure to insert an MD in the direction of arrow mark on the MD cartridge. If you cannot insert an MDYou have inserted an MD incorrectly and taken it offby force.MD loading slot rejects MD insertion. If this occurs,wait for one minute at most with the MD recorderturned on until a mechanical s...
Page 11 - Press; Searching and Skipping Tracks; To search and skip to a particular point in a track
8 If the MD or each track has a titleThe disc title and track titles will be shown at thelower portion of the display window (Title longer than11 characters scrolls to show the entire title). • DO NOT insert any foreign matters. 2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) b...
Page 12 - To check the program contents; Press SET button to enter selected track number to
9 • If you try to program a 33rd step “MEMORY FULL” will appear in the displaywindow, and your entry is ignored. • The total playback time of programed tracks exceeds 99’59”“– – : – –” will appear in the display window. 6 Press 6 (play/pause) button on the MD recorder. The programed tracks are playe...
Page 13 - Repeating Tracks — Repeat Play; : Repeats all the tracks on the MD or a; To exit from Repeat play mode; and; Playing at Random — Random Play; button before going to the next step.; To exit from Random play mode
10 Repeating Tracks — Repeat Play You can have the entire disc, the programed tracks, or theindividual track repeat as many times as you like. 1 Insert an MD.If the current playing source is not the MD, press 6 (play/pause) button on the MD recorder, then 7 (stop) button before going to the next ste...
Page 14 - Things to Know Before You Start Recording; Recording onto an MD; To avoid erasing important recordings; • When recording from a digital source such as a
11 Things to Know Before You Start Recording • It should be noted that it may be unlawful to pre-recorded tapes, records, or discs without the consent of the owner of copy right in the sound or video recording, broadcast or cable program and in any literary,dramatic, or artistic embodied therein. • ...
Page 16 - Monophonic Long Recording; Repeat the steps 1, 2 and 3 in previous page.
13 5 Press 6 (play/pause) button on the MD recorder to start recording.The REC indicator remains lit, and recording starts. • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, pr...
Page 17 - Recording a CD — Synchronized Recording; Repeat the steps 1 and 2 in previous section.; Recording a CD; Recording a CD Manually
14 Recording a CD — Synchronized Recording This is the easiest way of CD recording. Setting the recordingmode, you can start playing back an entire CD and recordingit onto an MD simultaneously. 1 Repeat the steps 1 and 2 in previous section. 2 Press REC MODE button behind the sliding panelto select ...
Page 18 - Recording a Tape — Sound Synchronized Recording; Recording a Tape; Recording a Tape Manually
15 • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again. Each time you press...
Page 19 - • If no sound comes in for more than 30 seconds, Sound; Recording onto a Tape; Recording an MD onto a tape manually; and the cassette deck will automatically stop.; and the cassette deck will automatically stop.
16 4 Press ` (playback) button on the cassette deck or TAPE ` (playback) button on the remote control. Once the cassette deck starts playback, the MD recorderdetects the audio signals and starts recording. Each time you press DISPLAY/CHARA. button,information switches between the remaining time fort...
Page 20 - Recording the External Equipment; Recording the External Equipment Manually
17 Recording the External Equipment When recording from the external equipment, you can selectone of the two recording methods — Manual Recordingand Sound Synchronized Recording. • Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operatethe MD r...
Page 22 - Introducing MD Editing Functions; Editing an MD
19 Introducing MD Editing Functions A recorded MD can be edited in many ways. The MD editingfunctions include dividing, joining, moving, erasing singletracks, erasing the entire disc, and more than one of themcan be combined as required. Dividing a track (DIVIDE) : Page 20This function divides a tra...
Page 23 - • To operate with the buttons behind the sliding panel,; DIVIDE Function; Rotate MULTI JOG dial or
20 REC REC PAUSE SAMPLING RATE CONVERTER MD IN lamp MD loading slot 0 (eject) M I C R O C O M P O N E N T S Y S T E M U X - G 6 R MOS - FET OPEN/CLOSE AUX VOLUME MULTI FM/AM STANDBY/ON JOG OPEN/CLOSE MULTI JOG DISPLAY/CHARA. PLAY MODE REC MODE TITLE /EDIT CLOCK/TIMER CANCEL ENTER SET SET TITLE/EDIT ...
Page 24 - JOIN Function
21 • If “TRACK PROTECTED” appears, the selected track has been write-protected by another component.You cannot edit such a protected track. To cancel theediting, press TITLE/EDIT button. 5 Press SET button when you find the point where youwant to divide the track.The MD recorder repeats the selected...
Page 25 - MOVE Function; button also; ERASE Function; Insert an MD you want to edit into the MD loading
22 MOVE Function This function allows you to move a track to the positionyou prefer. It is useful to change the order of the tracks asyou like.• To quit any time during editing process, press TITLE/ EDIT button. 1 Insert an MD you want to edit into the MD loadingslot.The MD IN lamp lights orange. 2 ...
Page 26 - Press ENTER button again.; ALL ERASE Function; • If you want to cancel the editing, press CANCEL; Press ENTER button to erase all the tracks.; Erasing a Portion of a Track
23 7 Press ENTER button to finish your selection of tracksto erase. • If you want to cancel the editing, press CANCEL button. 8 Press ENTER button again. 9 Press 0 (eject) button to eject the MD. “WRITING” appears while the editing you have madeis being recorded on the MD. ALL ERASE Function This fu...
Page 27 - Assigning a Title; b) Pressing twice makes disc title entry available,; Assigning Titles to an MD
24 You can assign a name to each MD and to each track.Once a title is assigned, it is displayed in later playback forconfirmation.Each title can be composed of up to 64 characters, and canbe input using alphabetic characters (uppercase andlowercase), symbols and numerals. • To operate with the butto...
Page 28 - Press SET button to select the track number.; You can assign titles during play or recording
25 3 Press SET button to select the track number. Rotate MULTI JOG dial to select desired track number(or press < / > button on the remote control). 4 Press SET button again to enter the character entrymode.The character sets present 11 characters alphabeticallyat a time in the upper portion o...
Page 29 - Available Characters; • During Synchronized Recording:; Changing the Title; You can make a correction or change the title.; Rotate MULTI JOG dial or press; character set you want.; Repeat steps 2 to 4 to correct another characters.; button after pressing ENTER button once in this step.
26 Available Characters Uppercase and Symbols (blank) Lowercase and Symbols (blank) Numerals • During Synchronized Recording: You can assign the disc title, and 15 track titles one afteranother as recording goes on. The track titles you haveentered are automatically assigned to the tracks recordedon...
Page 30 - Handling MDs; MD Handling Precautions; To maintain high quality audio for a long period; • In a bathroom or where the humidity is high. The disc; Periodical maintenance
27 Handling MDs MD Handling Precautions To maintain high quality audio for a long period Since the disc is accommodated inside a cartridge, itcan be handled easily without caring about dust anddirt. However, to maintain the high audio quality foran extended period, use care in the following points. ...
Page 31 - Additional Information; MD Disc Types; Sound Cruise
28 Additional Information MD Disc Types There are two types of MDs: Premastered (prerecorded) and Recordable (blank). Premastered MDsPremastered MDs, which have been recorded at music studio, can be played back like regular CDs. On an MD of thistype, data is recorded as the presence or absence of ti...
Page 32 - Sound Skip Guard Memory; DIGITAL; OK
29 Sound Skip Guard Memory The biggest weakness of discs is their susceptibility to vibration. The “Sound Skip Guard Memory” has been developedto cope with this weakness.With this function, a few seconds of signals read by the optical read head from the disc are first stored in memory beforebeing re...
Page 33 - MD Messages; Message; There is a problem with this MD.; Solution; Insert the MD cotrectly.
30 MD Messages Message BLANK DISC CANNOT JOIN DIGITAL IN UNLOCK DISC ERROR DISC FULL DISC PROTECTED EMERGENCY STOP LOAD ERROR MD NO DISC NON-AUDIO CANNOT COPY PLAYBACK DISC SCMS CANNOT COPY TRACK PROTECTED Signification The disc is blank. You are trying to join tracks whichcannot be joined. There is...
Page 34 - MD Restrictions; Symptoms; The JOIN function sometimes does not work.; Cause; • Repeating erasure and recording on the same MD
31 MD Restrictions The MD records data in an original format that differs from that of conventional cassette tapes or DATs. Since thereare some limitations with this recording format, the following types of symptoms may occur. These symptoms arenot malfunctions. Symptoms “DISC FULL” appears, even th...
Page 35 - Troubleshooting; Symptom; Specifications; MD recorder
32 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service.If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualifiedperson, such as your dealer, for service. Symptom No s...
