Page 2 - No obstructions and open spacing.; Warnings, Cautions and Others; Caution ––
Caution: Proper VentilationTo avoid risk of electric shock and fire, and to preventdamage, locate the apparatus as follows:1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensionsbelow. 3 Bottom: Place on the level surface. ...
Page 3 - REPRODUCTION OF LABELS; IMPORTANT FOR LASER PRODUCTS
G-2 REPRODUCTION OF LABELS IMPORTANT FOR LASER PRODUCTS 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE 2 WARNING LABEL, PLACED INSIDE THE UNIT CLASS 1LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlockfailed or defeated. Avoid direct exposure to be...
Page 4 - About This Manual; Installation; We would like to thank you for purchasing one of our JVC products.; Introduction
1 Power sources • When unplugging from the wall outlet, always pull the plug, not the AC power cord. DO NOT handle the AC power cord with wethands. Moisture condensation Moisture may condense on the lens inside the units in thefollowing cases:• After starting heating in the room• In a damp room• If ...
Page 5 - Contents
2 Contents Introduction .......................................................... 1 About This Manual ............................................................... 1Precautions ........................................................................... 1 Contents ....................................
Page 6 - Location of the Buttons and Controls; Display window; Front Panels; Become familiar with the buttons and controls on the units.
3 Location of the Buttons and Controls XT-UXG6Compact Disc/Tuner AX-UXG6Stereo Amplifier TD-UXG6Cassette Deck Display window Front Panels REC BASS 1 2 3 4 Become familiar with the buttons and controls on the units. q w e M I C R O C O M P O N E N T S Y S T E M U X - G 6 MOS - FET OPEN/CLOSE AUX VOLU...
Page 7 - Stereo Amplifier
4 Front Panels AX-UXG6 Stereo Amplifier 1 button and STANDBY/ON lamp (11)* 2 MULTI JOG dial 3 FM/AM button (14)* 4 OPEN/CLOSE button (13)* 5 Display window 6 VOLUME dial (11) 7 AUX button (13, 24)* XT-UXG6 Compact Disc / Tuner 8 CD tray 9 Remote sensor (5) p PHONES jack (12) q 0 (open/close) button ...
Page 8 - Remote Control; MD; Become familiar with the buttons on the remote control.
5 VOLUME MD ENTER AUTO PRESET PLAY MODE FM MODE CANCEL DISPLAY /CHARA. BASS SLEEP PANEL OPEN/CLOSE REMOTE CONTROL RM-SUXG6E > < TAPE FM/AM DOWN SET UP AUX 2 4 6 ; 1 a s d f g hj k l / 3 5 8 p 7 9 w q r e t y i u TITTLE/EDIT REPEAT TREBLE DIMMER CLOCK/TIMER CD ACTIVE BASS EX. o Remote Control W...
Page 9 - Unpacking; If any is missing, consult your dealer immediately.; • To connect the cables, press the middle of the connector; body until it clicks into the connector on the rear panel.; • To disconnect, if needed, pull the connector out pushing; Getting Started
6 Unpacking After unpacking, check to be sure that you have all thefollowing items.The number in the parentheses indicates the quantity of thepieces supplied. • AM loop antenna (1)• FM antenna (1)• Remote control (1)• Batteries (2)• Speaker cords (2)• External wire (1) If any is missing, consult you...
Page 10 - Connecting Antennas; Supplied FM antenna; Attach the FM antenna to the FM 75; To connect an outdoor FM antenna; Before connecting it, disconnect the supplied FM antenna.; Connecting MD Recorder XM-G6; Connecting Sub Woofer System
7 Connecting Antennas Supplied FM antenna 1 Attach the FM antenna to the FM 75 Ω COAXIAL terminal on the rear panel of XT-UXG6. 2 Extend the FM antenna. 3 Fasten it up in the position which gives you thebest reception. About the supplied FM antennaThe FM antenna supplied with this unit can only beus...
Page 11 - Connecting Speakers; You can connect the speakers using the speaker cords.; Open the speaker terminal.; AM antenna
8 RIGHT LEFT SPEAKERS 1 2, 3 Connecting Speakers You can connect the speakers using the speaker cords. 1 Open the speaker terminal. 2 Insert the end of the speaker cord to the terminal.Match the polarity of the speaker terminals: Red (+)to red (+) and black (–) to black (–). 3 Close the speaker term...
Page 12 - Connecting Other Equipments
9 (AC wall outlet) To ANALOG IN To DIGITAL OUT To audio output XT-UXG6 To optical digital input Connecting Other Equipments You can connect the following equipments to the system: • Audio equipment — used only as an analog playback device. • Audio equipment with an optical digital input terminal — u...
Page 13 - Basic Settings; Setting the Clock; • To correct the hour after pressing SET button, press; CANCEL button. The hour digit starts blinking again.; Setting the Display Illumination (Dimmer); • While the system is turned off:
10 Basic Settings Before operating the system any further, set the clock builtin this system first, then some other basic settings. Setting the Clock You can set the clock using the remote control whetherthe system is turned on or turned off (i.e. standby mode). 1 Press CLOCK/TIMER button on the rem...
Page 14 - Common Operations; One Touch Play; Adjusting the Volume
11 Common Operations Here are basic and common things that apply to all theoperations of UX-G6 system. Turning On the Power and Selecting theSources When you press a play button for example, like FM/AM,CD 6 (play/pause), or TAPE 23 (playback), the system automatically turns on and STANDBY/ON lamp li...
Page 15 - • When using the remote control, press VOLUME + button; Reinforcing the Bass Sound; • To get the effect, press ACTIVE BASS EX. button on; Adjusting Bass and Treble Sounds; To adjust the bass; To cancel the effect, adjust the level to “0.”; To exit from the level setting, press the button again.; To cancel the effect, adjust the level to “0.”
12 • When using the remote control, press VOLUME + button to increase the volume level or press VOLUME – buttonto decrease it. The volume level (from 0 to 50) appears in the displaywindow as follows: For private listeningConnect a pair of headphones to the PHONES jack.No sound comes out of the speak...
Page 16 - Operating the Sliding Panel; • Press OPEN/CLOSE button on the front panel (or PANEL; When turning off the system; Listening to the External Equipment; Start playing back the external equipment.
13 Operating the Sliding Panel You can use the sliding panel to enable advanced operationsfeatures provided for UX-G6 micro component system. • Press OPEN/CLOSE button on the front panel (or PANEL OPEN/CLOSE button on the remote control).The sliding panel opens to uncover the inner buttonsbehind the...
Page 17 - Tuning in a Station; Listening to FM and AM Broadcasts
14 You can tune in FM and AM (MW/LW) stations manually,automatically, and use the preset station feature. Tuning in a Station 1 Press FM/AM button.The system automatically turns on and tunes in the lasttuned station (either FM or AM—MW/LW). Thefollowing information appears in the display window. • E...
Page 18 - Presetting Stations; To preset stations manually — Manual Preset; Press; To preset stations automatically — Auto Preset; On the remote control only:; To change the FM reception mode
15 Presetting Stations You can preset up to 30 FM and 15 AM (MW/LW) stationsinto memory by following two methods: manual/automaticpresettings. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1again. To preset stations manually — Man...
Page 19 - Playing Back the Entire Disc — Normal Play; inner circle of the disc tray.; Playing Back a CD; • When closing the tray without a CD placed, “CD NO; When pressing
16 You can use Normal, Program, Random, or Repeat Play.• When using the buttons behind the sliding panel, press OPEN/CLOSE button on the AX-UXG6 to open thesliding panel first. • When using the remote control, press CD 6 (play/ pause) button first and 7 (stop) button successively. Playing Back the E...
Page 20 - To go to another track; PROGRAM; RANDOM; Searching and Skipping Tracks; To search and skip to a particular point in a track
17 To go to another track Before or during playback, press 4 / ¢ button repeatedly: Press ¢ button: Skips to the beginning of the next and succeedingtracks. Press 4 button: Goes back to the beginning of the current andprevious tracks. Rotating MULTI JOG dial clockwise also changes the tracksforwards...
Page 21 - Pressing; Press SET button to program the track number.; • If you try to program a 33rd step; • When Program play finished, CD unit automatically; To check the program contents
18 To modify the program Before playing back the CD, you can erase the lastprogramed track by pressing CANCEL button. Each timeyou press the button, the last programed track is erased fromthe end of program.• To add new tracks to the program before you start playing-back, simply select a track numbe...
Page 22 - Repeating Tracks — Repeat Play; : Repeats all the tracks on the CD or a; To exit from Repeat play mode; Playing at Random — Random Play; To exit from Random play mode
19 Repeating Tracks — Repeat Play You can have the entire disc, the programed tracks, or theindividual track repeat as many times as you like. 1 Place a CD.If the current playing source is not the CD, press 6 (play/pause) button on the CD unit, then 7 (stop) button before going to the next step. 2 P...
Page 23 - • Each time you press; Playing Back a Tape — Basic Operation; Playing Back a Tape
20 • DO NOT try to open or close the tape tray by hands as it will be damaged. • DO NOT place any foreign matters.• DO NOT prevent the tray from opening and closing, because it may results damages on theunit. 3 Press 0 (open/close) button again to close the tray. 4 Press ` (playback) button on the u...
Page 24 - To skip forward to the next music; Playing Back Dolby-Recorded Tape; To skip backward to the current music
21 To skip forward to the next music Press the button same as the tape direction indicator asfollows: 3 ] Press ¢ button. 2 ] Press 4 button. During Music Scan progressed, the tape directionindicator starts blinking rhythmically. Repeating Music Scan feature made easysearching a desired program on a...
Page 25 - Manual Recording onto a Tape; Press REC PAUSE button on the cassette deck unit.; Recording onto a Tape
22 Two types of cassette tapes can be recorded onto, includingnormal (Type I), and High position (Type II) tapes. Thesetypes are identified automatically by the cassette deck unitand the recording level is also corrected automatically.Neither volume level nor sound effects during playback doesaffect...
Page 26 - • Dolby B NR; Recording in Auto Reverse; • Each time to press; or; • To stop recording for a moment, press REC PAUSE
23 • Dolby B NR Press DOLBY B NR button before recording toreduce frequency response noise.When the tape is played back later, also press thebutton with its lamp lit. • BEAT CUT on AM (MW/LW) When recording AM broadcast, beats noise maybe heard.Set the BEAT CUT selector to either position 1 or2 on t...
Page 27 - Recording an external audio source manually
24 Synchronized Recording from a CD CD application on UX-G6 system can be recorded with asimple, one-touch operation. 1 Place a recordable tape and a source CD into eachtray.• To record using Dolby B NR, press the DOLBY B NR button before recording so that its lamp near thebutton lights orange. 2 Pr...
Page 28 - • Each time you press the button, the timer mode; Using Recording Timer; • To correct a mis-entry any time during the setting process,; How Recording Timer actually works; Using the Timers
25 • Each time you press the button, the timer mode changes as follows: 2 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to select the hour of the timer-on time, then press SET button. 3 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to...
Page 29 - Using Daily Timer; How Daily Timer actually works; either a tape or an MD as recording media.
26 2 Press SET button to call the previous settings fornext timer recording.The REC timer indicator lights, and the setting itemsappear one after another in the display window.• To erase the recording timer, press CANCEL button in this step. Using Daily Timer With Daily Timer, you can wake up on you...
Page 30 - To use the same Daily Timer settings repeatedly
27 4 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to select the hour of the timer-off time, then press SET button. 5 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to select the minute of thetimer-off time, then press SET button. 6 Ro...
Page 31 - Timer Priority; • Recording Timer has priority over Daily Timer and; Using Sleep Timer; How Sleep Timer actually works; repeatedly until the desired time length appears.; • To cancel the setting, press SLEEP button repeatedly; until the sleep timer indication disappears.
28 Timer Priority Since each timer can be set separately, you may wonderwhat happens if the setting for these timers overlaps.Here are the priorities for each timer. • Recording Timer has priority over Daily Timer and Sleep Timer.If Daily Timer is set to come on while Recording Timeris operating, Da...
Page 32 - General Notes; Handling CDs; Maintenance and Additional Information
29 General Notes In general, you will have the best performance by keepingyour CDs, cassette tapes and the mechanism clean.• Store CDs and cassette tapes in their cases, and keep them in cabinets or on shelves. • Keep the CD disc tray, and the cassette tapes tray closed when not in use. Handling CDs...
Page 33 - Types of Cassette Tapes; Normal tape; Handling Cassette Tapes; Cautions regarding handling; DO NOT cover the tape-type detection slots.
30 Types of Cassette Tapes This cassette deck unit incorporates an Automatic TapeDetection function. This mechanism uses the tape-typedetection holes to distinguishes which type of tape wasinserted, and sets the bias and equalizer to the optimumsettings for that tape automatically.The following type...
Page 34 - Troubleshooting; Symptom
31 Troubleshooting If you are having a problem with your system, check this list for a possible solution before calling for service.If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualifiedperson, such as your dealer, for service. Symptom N...
Page 35 - Specifications
32 Specifications Stereo Amplifier AX-UXG6 Output power: 48 W (24 W + 24 W) at 6 Ω (Max.) 42 W (21 W + 21 W) at 6 Ω (10% THD) Load impedance: 6 Ω (6 Ω to 16 Ω allowance) Load impedance: 6 Ω (6 Ω to 16 Ω allowance) Audio output level/Impedance (at 1 kHz): Sub Woofer 800 mV/440 Ω Power requirement: AC...
Page 37 - CASSETTE DECK; MICRO COMPONENT SYSTEM; INSTRUCTIONS; MANUAL DE INSTRUCCIONES; STEREO AMPLIFIER
COMPACT DISC/TUNER CASSETTE DECK For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LV T 0377-005A [U, UB, US] UX-G6 Consists of AX-UXG6, XT-UXG6, TD-UXG6, ...
Page 40 - Front view
Caution: Proper VentilationTo avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.3 Bottom: Place on the level surface....
Page 41 - REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS /
REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / IMPORTANT FOR LASER PRODUCTS IMPORTANTE PARA PRODUCTOS LÁSER 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE 1 1 ETIQUETA DE CLASIFICACION, PROVISTA SOBRE LA SUPERFICIE EXTERIOR 2 WARNING LABEL, PLACED INSIDE THE UNIT 2 ETIQUETA DE ADVERTENCIA,...
Page 42 - English; Power sources
1 English Power sources • When unplugging from the wall outlet, always pull the plug, not the AC power cord. DO NOT handle the AC power cord with wethands. Moisture condensation Moisture may condense on the lens inside the units in thefollowing cases:• After starting heating in the room• In a damp r...
Page 52 - Adjusting the Voltage Selector
11 English Common Operations Here are basic and common things that apply to all theoperations of UX-G6 system. Adjusting the Voltage Selector Before plugging in the system, set the correct voltage foryour area with the voltage selector on the rear of AX-UXG6unit. [A] [B] Notes on [B] type voltage se...
Page 57 - • When using the remote control, press CD
16 English • DO NOT try to open or close the CD tray by hands as it will be damaged. • DO NOT place any foreign matters.• DO NOT prevent the tray from opening and closing, because it may results damages on theunit. 3 Press 0 (open/close) button again. The disc tray closes while the information appea...
Page 59 - To modify the program; To erase all the programed data
18 English 4 Press SET button to program the track number. Track number Program number Here the track number 2 on the CD is stored into aprogram number 1, and shortly after that the totalplayback time of programed tracks appears in the displaywindow as follows: Total playback time 5 Repeat steps 3 t...
Page 63 - • It may be unlawful to record or play back copyrighted
22 English 2 Place a recordable tape with the side you want torecord facing up.Press 0 (open/close) button on the cassette deck unit to open the tape tray; place a tape on it; and press 0 (open/ close) button again to close it. • You cannot record onto the tape without a protect tab. When using that...
Page 68 - TUNER AM: Tunes into a preset AM station. Go to
27 English 5 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to select the minute of thetimer-off time, then press SET button. 6 Rotate MULTI JOG dial (< / > button on the remotecontrol also available) to select the source, then pressSET button. TUNER FM: Tunes i...
Page 74 - PRECAUCIÓN
WARNING :SHOCK HAZARD- DO NOT OPENAVIS: RISQUE DECHOC ELECTRIQUE- NE PAS OUVRIR VICTOR COMPANY OF JAPAN,LIMITED UNPLUG MAINS (AC) CORDFROM WALL OUTLET,WHENCONNECTING THIS. NOTE NEED XT-UXG6WHEN SERVICING CAUTION: SPEAKER IMPEDANCE 6 16 Ω FROM CONNECTOR-A OF XT-UXG6 RIGHT LEFT SUB WOOFER OUT SPEAKERS...
Page 76 - Caution: Proper Ventilation
Warnings, Cautions and Others Caution –– switch! Disconnect the mains plug to shut the power off completely (theSTANDBY/ON lamp goes off).The switch in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights red.• When the unit is turned on, the STA...
Page 93 - Receiving FM Stations with RDS; Changing the RDS Information; PS
16 RDS allows FM stations to send an additional signal alongwith their regular program signals. For example, the stationssend their station names, as well as information about whattype of program they broadcast such as sports and music. When tuned in an FM station which provides the RDSservice, RDS ...
Page 94 - Switching to a Program Type Temporarily; To activate the EON function, use the remote control.
17 Switching to a Program Type Temporarily The EON function allows the system to switch temporarilyto a broadcast program of your choice (News, TA, and/orInfo) from a different station except when you are listeningto a non-RDS stations — some FM stations and AM (MW/LW) stations.• EON indicator light...
Page 95 - How the EON function actually works:; The unit continues tuning in the current station.; More about the EON function
18 How the EON function actually works: CASE 1 If there is no station broadcasting the program youhave selected The unit continues tuning in the current station. « When a station starts broadcasting the program youhave selected, the unit automatically switches to thestation. The indicator of receive...
Page 96 - Description of the PTY codes:
19 Finance: Stock market reports, commerce, tradingetc. Children: Programs targeted at a young audience. Social: Programs about sociology, history,geography, psychology and society. Religion: Religious programs. Phone In: Involving members of the public expressingtheir views either by phone or at a ...
Page 103 - • It should be noted that it may be unlawful to pre-
26 Two types of cassette tapes can be recorded onto, includingnormal (Type I), and High position (Type II) tapes. Thesetypes are identified automatically by the cassette deck unitand the recording level is also corrected automatically.Neither volume level nor sound effects during playback doesaffect...
Page 116 - Het lampje STANDBY/ON
Warnings, Cautions and Others Warnung, Achtung und sonstige Hinweise Mises en garde, précautions et indications diverses Waarschuwingen, voorzorgen en andere mededelingen Avisos, precauciones y otras notas Avvertenze e precauzioni da osservare Per l’Italia:“Si dichiara che il questo prodotto di marc...
Page 122 - Location of the Buttons and
3 English Location of the Buttons and XT-UXG6RCompact Disc/Tuner AX-UXG6Stereo Amplifier TD-UXG6Cassette Deck Display window Front Panels REC BASS 1 2 3 4 5 Become familiar with the buttons and controls on the units. q w e M I C R O C O M P O N E N T S Y S T E M U X - G 6 R MOS - FET OPEN/CLOSE AUX ...
Page 135 - Shows commonly known station names.
16 English RDS allows FM stations to send an additional signal alongwith their regular program signals. For example, the stationssend their station names, as well as information about whattype of program they broadcast such as sports and music. When tuned in an FM station which provides the RDSservi...