JVC LM-H171 - Manual

4 Installation To detach the stand CAUTION Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. Screw holes for stand attachment Screw holes for stand attachment (on the monitor) Screw holes for stand attachment (on the stand) Guides Guide holes Atta...

5 ENGLISH To prevent an accidental fall Fix the monitor to a wall by using strings. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durab...

2 3 4 5 6 7 9 p 1 8 6 4 VOLUME –/+ ( / ) buttons* 2 Adjusts the volume. 5 MENU button Displays the MAIN MENU.• To display the SET UP MENU, press button while pressing MENU button. • For the menu operations, see page 7. 6 SCAN SIZE button/lamp Selects the screen size when VIDEO 1 or VIDEO 2 is select...

7 ENGLISH 1 Press MENU button. 2 Press buttons to select an item, then press buttons to make adjustments. Ex.: When “COLOR SYSTEM” is selected 3 Press MENU button to finish the menu operation. Selected item Operation guide Main Menu Operations 1 Press button while pressing MENU button. 2 Press butto...

1 3 4 5 6 7 2 8 7 Rear panel Security slot Install a security wire to this slot. 4 DVI-D terminal Input terminal for the DVI-D signal from a personal computer.• Use the AUDIO INPUT DVI-D terminal ( 7 ) for audio connection. 5 VIDEO 2 IN/OUT terminals Input (IN) and output (OUT) terminals for the com...

9 ENGLISH Specification of the Y/C terminal Connect it to the S-video output terminal. Pin No. Input signal Pin No. Input signal Pin No. Input signal 1 T.M.D.S Data 2– 9 T.M.D.S Data 1– 17 T.M.D.S Data 0– 2 T.M.D.S Data 2+ 10 T.M.D.S Data 1+ 18 T.M.D.S Data 0+ 3 T.M.D.S Data 2 shield 11 T.M.D.S Data...

10 Menu Configuration—MAIN MENU BACK LIGHT Adjusts the brightness of the display. SHARPNESS* 1, 2 Adjusts the sharpness of the picture. CTI.* 1, 2 Adjusts the clearness of the outlines of the chrominance signal.• This setting does not affect BW signals. LTI.* 1, 2 Adjusts the clearness of the outlin...

ENGLISH 11 PICTURE SUB ADJ. Adjusts the standard level for the picture adjustment. Item To do Setting value CONTRAST * 1 Adjust the standard level for the contrast adjusted with CONTRAST button on the front panel. –40 – +40 BRIGHT * 1 Adjust the standard level for the brightness adjusted with BRIGHT...

12 SYNC FUNCTION Setting for the synchronization with signals Item To do Setting value SYNC TYPE Select the sync signal for RGB input. H/V. SYNC, C.SYNC, G.ON SYNC NO SYNC ACTION Select the screen status when no signal is coming in. OFF, POWER SAVE (Power Save mode),GRAY BACK (Gray Back mode) DELAY ...

ENGLISH 13 To assign the functions to the pin terminals For the operation procedure, see page 7. 1 Select “REMOTE SETTING” on the SET UP MENU. 2 Select a pin name (“PORT F1” – “PORT F6”) for which you want to assign a function, then select the function you want to assign.• For selectable functions, ...

14 Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page No power supply • Firmly ins...

15 ENGLISH Specifications 7 General Model name LM-H191 LM-H171 Type LCD Display Monitor Screen size Type 19 format Type 17 format Aspect ratio 5:4 LCD panel 19˝, active matrix TFT 17˝, active matrix TFT Effective screen size Width: 376.3 mm (14 13/16˝)Height: 301 mm (11 13/16˝) Width: 337.9 mm (13 7...

16 • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products. • Design and specifications are subject to change without notice.• All company names and product names mentioned herein are used for identif...