JVC LM-170 - Manual - manualsarea.com

Page 2 - Safety Precautions; IMPORTANT SAFEGUARDS; IMPORTANT INFORMATION

Safety Precautions IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated int...

Page 6 - Information for Users on Disposal of Old Equipment; Maintenance; Screen

Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling...

Page 7 - Contents

Contents Safety Precautions ........................................................ 2 IMPORTANT SAFEGUARDS ................................... 2Maintenance ............................................................. 6 Controls and Features .................................................. 8 Fron...

Page 8 - Controls and Features; Front panel; Menu control button; MENU button

8 2 4 3 6 5 7 1 Controls and Features 7 Front panel 1 Speaker (Monaural) (LM-170 only) Outputs the audio signal of the selected input. NOTE: • For audio signals input to the DVI-D or RGB terminal, left and right audio channel are mixed and output as monaural audio. 2 CHROMA/PHASE button* 1 Activates...

Page 9 - INPUT SELECT buttons/lamps; Power lamp

9 8 p 9 ENGLISH 8 INPUT SELECT buttons/lamps Select an input to display. VIDEO 1: Selects the video signal input to the VIDEO 1 terminal. VIDEO 2: Selects the video signal input to the VIDEO 2 terminal. DVI: Selects the video signal input to the DVI-D terminal. RGB: Selects the video signal input to...

Page 10 - Rear panel; AC inlet; RGB terminals; Security slot

10 6 f e g c d b a 3 1 h 2 4 5 Controls and Features (cont.) 7 Rear panel 1 AC inlet Power input connector. Connect the provided AC power cord to an AC outlet (AC 120 V/AC 220 - 240 V, 50 Hz/60 Hz). 2 VIDEO terminals a VIDEO 1 terminals (BNC) Input (IN) and output (OUT) terminals for the composite s...

Page 11 - Installation; Using the monitor on the stand

11 ENGLISH Installation NOTE: • Do not rest your arm on the monitor or lean against the monitor.• Do not hold the LCD panel when installing the monitor.• Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury.• The illustratio...

Page 12 - Installing the monitor on the wall; Installing the monitor on the rack

12 VESA mounting holes(See page 21 for the specifications of the mounting holes.) Installation (cont.) 7 Installing the monitor on the wall Use a commercial wall mounting unit compliant with the VESA standard (100 mm x 100 mm). NOTE: • Detach the stand first. ( ☞ page 11) • Ask your dealer to instal...

Page 13 - How to Use the MAIN MENU; MAIN MENU items; BACK LIGHT

13 ENGLISH How to Use the MAIN MENU The MAIN MENU contains the functions for daily use. MAIN MENU Operation guide Shows the buttons for each operation. 7 To exit the menu: Select Adjust 7 MAIN MENU items BACK LIGHT Adjusts the brightness of the display. Setting value: 00 - 25 SHARPNESS Adjusts the c...

Page 14 - How to Use the SET-UP MENU

14 How to Use the SET-UP MENU The SET-UP MENU contains the initial settings of the monitor. SET-UP MENU NOTE: • The menu automatically disappears in about 30 seconds after the last menu operation. • Some items may not appear on the menu. Those items are not available for the current input or the cur...

Page 16 - REMOTE SYSTEM; NO SYNC FUNCTION; STATUS DISPLAY; CONTROL LOCK

16 How to Use the SET-UP MENU (cont.) REMOTE SYSTEM Selects the external control system of the MAKE/TRIGGER terminal. Setting value: MAKE (make contact system), TRIG. (trigger system) NO SYNC FUNCTION Selects the screen status when no signal is being input. NO SYNC DISPLAY Sets the screen status whe...

Page 17 - How to Use the External Control; About the external control; How to use the MAKE/TRIGGER terminal

17 ENGLISH How to Use the External Control 7 About the external control The monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the MAKE (make contact) or TRIG. (trigger) system. MAKE (make contact) system: Controls the function by short-circuiting the corresponding pin...

Page 18 - Troubleshooting

18 Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) Reference p...

Page 20 - Specifications

20 Specifications Model LM-170 LM-150 Type LCD Display Monitor LCD panel 17”, active matrix TFT 15”, active matrix TFT Effective Screen Size Width: 337.9 mm (13 1/4”) Height: 270.3 mm (10 5/8”) Width: 304.1 mm (11 15/16”) Height: 228.1 mm (8 15/16”) Number of Pixels Displayed 1280 x 1024 1024 x 768 ...

Page 21 - Dimensions

21 VESA mounting holes(Size: M4, depth: 10 mm) 100 135 (5 3/8) 100 374 (14 3/4) ENGLISH 7 Dimensions Unit : mm (inch) LM-170 Front View Side View Rear View (without the stand) LM-150 Front View Side View Rear View (without the stand) 342 (13 1/2) 291 (11 1/2) 70.5 (2 7/8)28.5 (1 1/8) 70.5 (2 7/8)28....

Page 22 - Available computer signals; Preset signals

22 Specifications (cont.) Specification of the DVI-D terminal Pin No. Input signal Pin No. Input signal Pin No. Input signal 1 T.M.D.S Data 2– 9 T.M.D.S Data 1– 17 T.M.D.S Data 0– 2 T.M.D.S Data 2+ 10 T.M.D.S Data 1+ 18 T.M.D.S Data 0+ 3 T.M.D.S Data 2/4 shield 11 T.M.D.S Data 1/3 shield 19 T.M.D.S ...

JVC LM-170 - Manual

Table of Contents:

Summary

Other JVC Models