Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; How to reset your unit:
2 ENGLISH BEFORE USE * For safety.... • Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. • Stop the car before performing any complicated operations. * Temperature inside the car.... If you have parked the car for a long time in hot orcold weather,...
Page 3 - CONTENTS
3 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ............................... 2 How to use the MODE (M) button...
Page 4 - How to change the display patterns:
4 ENGLISH CAUTION on Volume Setting CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, forexample, the speakers may be damaged by the sudden increase in the output level. Therefore, lower thevolume before playing a disc and adjust it as required...
Page 5 - h j; Control panel; LOCATION OF THE BUTTONS; Display window
5 ENGLISH ATT MOSFET E-BASS DISP BAND MODE EB D B M 1 2 3 y t e 4 5 6 7 8 9 q p w DIRECTORY STATION TRACK FILE DISC LOCAL RPTSTRND MO i g h j k l o / ; a s d f u 2 0 0 W MP3 INPUT r K D - S H 9 0 9 K D - S H 7 0 7 Control panel LOCATION OF THE BUTTONS t Remote sensor y (control panel release) button...
Page 6 - Remote controller
ENGLISH 6 5 • Searches for stations while listening to the radio. • Fast-forwards or reverses the track/file if pressed and held while listening to any disc.(See pages 15 and 22.) • Skips to the beginning of the next track/file or goes back to the beginning of the current(or previous) track/file if ...
Page 7 - Preparing the remote controller; Return the battery holder.; Installing the battery; Remove the battery holder.
ENGLISH 7 Preparing the remote controller 2. Place the battery. Slide the battery into the holder with the + sidefacing upwards so that the battery is fixed inthe holder. Lithium coin battery(product number:CR2025) 3. Return the battery holder. Insert again the battery holder pushing it untilyou hea...
Page 8 - To drop the volume in a moment; BASIC OPERATIONS; Turning on the power
8 ENGLISH 2 Adjust the volume. Note: After adjusting the volume, you can push in thecontrol dial to avoid unintended operations.To use it again, push the control dial again tomake it come out. 3 Adjust the sound as you want.(See pages 27 – 29.) • You can adjust and store the input level of each sour...
Page 9 - Setting the clock
9 ENGLISH 2 1 Setting the clock 1 Press and hold SEL (select) for morethan 2 seconds so that one of the PSMitems appears on the display.(See page 31.) 2 Set the hour. 1 Select “CLOCK H (hour)” if not shown onthe display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK M (minute).” 2 Adjust the ...
Page 10 - RADIO BASIC OPERATIONS; To tune in to FM stations only with strong signals; Start searching a station.; Listening to the radio
10 ENGLISH RADIO BASIC OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT To stop searching before a station is received,press the same button you have pressed forsearching. To tune in to FM stations only with strong signals 1 Press MODE (M) to enter the functionsmode while listening to an FM broadcast. ...
Page 11 - Press and hold
11 ENGLISH Searching a station manually:Manual search 1 Select FM or AM. 1 Press SOURCE repeatedly to selectFM or AM as thesource. 2 If necessary, pressBAND (B) repeatedlyto select the FM bandnumber. Each timeyou press the button,the FM band changesas follows: Note: This receiver has three FM bands ...
Page 12 - Storing stations in memory; FM station automatic preset: SSM; Manual preset
12 ENGLISH Storing stations in memory You can use one of the following two methods tostore broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM ...
Page 13 - Tuning in to a preset station
13 ENGLISH 2 Tune in to a station (in this example,of 88.3 MHz). 3 Press and hold the number button (int h i s ex a m p l e , 1 ) fo r m o r e t h a n 2seconds. 4 Repeat the above procedure to storeo t h e r s t a t i o n s i n t o o t h e r p r e s e tnumbers. Notes: • A previously preset station i...
Page 14 - CD OPERATIONS; Playing a CD; Open the control panel.; To stop play and eject the disc
14 ENGLISH CD OPERATIONS When playing an MP3 disc, refer also to “MP3OPERATIONS” on pages 20 to 26. Playing a CD 1 Open the control panel. The control panel moves down,and the loading slot appears. Note: When an external component is connected to theMP3 INPUT jack, be careful of handling a disc. 2 I...
Page 16 - Selecting CD playback modes; To play back tracks at random (Random Play); Playing a CD Text; • When the source symbol animation display; Track Title
16 ENGLISH Selecting CD playback modes To play back tracks at random (Random Play) You can play back all tracks on the disc atrandom. 1 Press MODE (M) whileplaying a disc. This unitenters the functions mode. 2 Press RND (random) whilestill in the functions mode,so that “RANDOM” flasheson the display...
Page 17 - Prohibiting disc ejection
17 ENGLISH Prohibiting disc ejection You can prohibit disc ejection and can lock a discin the loading slot. While pressing SEL (select),press and hold 0 for more than 2 seconds.“NO EJECT” flashes on thedisplay for about 5 seconds, andthe disc is locked and cannot beejected. Note: If you press 0 whil...
Page 18 - MP3 INTRODUCTION; Compatible with ID3v1
18 ENGLISH MP3 INTRODUCTION How are MP3 files recordedand played back? MP3 “files (tracks)” can be recorded in“directories (folders)”—in PC terminology.During recording, the files and directories can bearranged in a way similar to arranging files anddirectories/folders of computer data.“Root” is sim...
Page 19 - MP3 directory/file configuration; Movement between the directories (pages 23 to 25)
19 ENGLISH MP3 directory/file configuration MP3 playback/search order (page 22) • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally this unit plays back MP3 files in the recorded order. • The numbers inside the directories indicate...
Page 20 - MP3 OPERATIONS; Playing an MP3 disc; • When “TAG DISP” is set to “ON” (initial; Directory name
20 ENGLISH MP3 OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT Refer also to “CD OPERATIONS” on pages 14 to17. Playing an MP3 disc 1 Open the control panel. The control panel moves down,and the loading slot appears. 2 Insert an MP3 disc into the loading slot. The unit draws thedisc, the controlpanel g...
Page 21 - • When “TAG DISP” is set to “OFF”; To change the display information; • When the source symbol animation
21 ENGLISH • When “TAG DISP” is set to “OFF” * When the source symbol animation display isnot selected. Notes: • All the files on the disc will be played repeatedly until you stop playback—All File Repeat Play. • MP3 discs require a longer readout time *** . (It differs due to the complexity of the ...
Page 23 - To select a particular file in a directory, press
23 ENGLISH To go to a particular directory directly IMPORTANT:To directly select the directories using thenumber button(s), it is required that directoriesare assigned 2 digit numbers at the beginning oftheir directory names. (This can only be doneduring the recording of CD-Rs or CD-RWs.)Ex.: If dir...
Page 24 - On the control panel:; On the remote controller:
24 ENGLISH To skip to the previous directory—eitheron the same hierarchy level or on adifferent hierarchy level On the control panel: 1 Press MODE (M) while playingan MP3 disc. The unit entersthe functions mode. 2 Press 4 briefly while still in the functions mode.Each time you press the buttonconsec...
Page 25 - To go back to the root directly, press R
25 ENGLISH To skip to the previous directory on the samehierarchy level (only within the same parent directory) On the remote controller: Each time you press the buttonconsecutively, the previousdirectory on the same hierarchylevel is located (and the first filein the directory starts playing, ifrec...
Page 26 - Selecting MP3 playback modes; To play back files at random (Random Play)
26 ENGLISH To play back only intros (Intro scan) You can play back the first 15 seconds of eachfile sequentially. 1 Press MODE (M) whileplaying an MP3 disc. Theunit enters the functionsmode. 2 Press INT (intro scan) whilestill in the functions mode, sothat “INTRO1” or “INTRO2”flashes on the display....
Page 27 - SOUND ADJUSTMENTS; Select the item you want to adjust.; Indication; Adjusting the sound; VOLUME
27 ENGLISH SOUND ADJUSTMENTS 1 Select the item you want to adjust. Each time you press the button,the adjustable items change asfollows: Indication To do: Range FADER* Adjust the front R06 (Rear only) and rear speaker | balance. F06 (Front only) BAL Adjust the left L06 (Left only) and right speaker ...
Page 28 - Select the sound mode you want.
28 ENGLISH Selecting preset sound modes (EQ) You can select a preset sound mode suitable tothe music genre. 1 Press EQ to activate the sound mode(EQ). Each time you press thebutton, the sound mode (EQ)is activated or deactivated. • When the sound mode (EQ) is activated, the lastselected sound mode i...
Page 29 - Select the frequency.
29 ENGLISH Storing your own soundadjustments You can adjust the sound modes to your preferenceand store your own adjustments in memory(USER 1, USER 2 and USER 3).• There is a time limit in doing the following procedure. If the setting is canceled before youfinish, star t from step 1 again. 1 Press E...
Page 30 - OTHER MAIN FUNCTIONS; Basic Procedure; Adjust the PSM item selected.
30 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings(PSM) You can change the items listed on the next pageby using the PSM (Preferred Setting Mode)control. Basic Procedure 1 Press and hold SEL (select) for morethan 2 seconds so that one of the PSMitems appears on the display.(See page 31.) ...
Page 32 - – BEEP SW
32 ENGLISH To turn the key-touch tone on or off – BEEP SW You can deactivate the key-touch tone if you donot want it to beep each time you press a button.When shipped from the factory, the key-touchtone is activated. • ON: Activates the key-touch tone. • OFF: Deactivates the key-touch tone. To turn ...
Page 33 - – CUT OFF F; To change the AM/FM channel intervals; – AREA
33 ENGLISH To select the external component to use– EXT IN (For KD-SH707 only) You can connect the external component to theCD changer jack on the rear using the Line InputAdaptor KS-U57 (not supplied).To use the external component as the playbacksource through this unit, you need to select whichcom...
Page 34 - – AUX IN; To change the FM tuner selectivity; – IF FILTER; To turn the tag display on or off; – TAG DISP
34 ENGLISH To turn the auxiliary input switch on or off – AUX IN You can switch the auxiliary input off when noexternal component is connected to the MP3INPUT jack.When shipped from the factory, the auxiliary inputswitch is set to “ON.” • ON: You can select “AUX INPUT(AUX)” as the playback source. •...
Page 35 - Assigning names to the sources; Sources; To erase the input characters; Capital letters
35 ENGLISH Assigning names to the sources You can assign names to stations, CDs, and theexternal components.After assigning a name, it will appear on thedisplay when you select the source. Sources Maximum number ofcharacters Station frequencies up to 11 characters (up to30 station frequenciesincludi...
Page 36 - Adjust the angle to the position you want.; When using the remote controller
36 ENGLISH Changing the control panelangle You can change the angle of the control panel tofour positions. Adjust the angle to the position you want. Each time you press the button,the panel angle changes asfollows: When using the remote controller Press ANGLE ∞ repeatedly. Each time you press the b...
Page 37 - Detaching the control panel; Unlock the control panel.; Attaching the control panel; Note on cleaning the connectors:
37 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel:• B...
Page 38 - EXTERNAL COMPONENT OPERATIONS; Playing external components
ENGLISH 38 EXTERNAL COMPONENT OPERATIONS Playing external components For KD-SH909: You can connect two external components to thisunit.Connect one to the MP3 INPUT jack on thecontrol panel, and the other to the LINE IN plugson the rear. • To use the external component connected to LINE IN plugs on t...
Page 40 - CD CHANGER OPERATIONS; Playing CDs; To fast-forward or reverse the track
40 ENGLISH CD CHANGER OPERATIONS EB E-BASS DISP BAND MODE MP3 INPUT We recommend that you use one of the CH-X serieswith your unit.If you have another CD automatic changer,consult your JVC car audio dealer forconnections. • For example, if your CD automatic changer is one of the KD-MK series, you ne...
Page 41 - RANDOM1; Mode
41 ENGLISH To go to a particular disc directly Press the number button corresponding to the discnumber to star t its playback (while the CD changeris playing). • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for...
Page 43 - ADDITIONAL INFORMATION; Sound modes (preset frequency level settings); Sound; Available characters
43 ENGLISH ADDITIONAL INFORMATION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode.• You can adjust the preset sound modes (except USER 1/2/3) temporarily. However, your temporary adjustments will be reset when you select anot...
Page 44 - TROUBLESHOOTING; Remedies; Causes; General Playback
44 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Remedies Change the disc. Stop playback while driving onrough roads. Change the disc. Check the cords andconnections. Adjust it to the optimum level. Set it to “ON”...
Page 45 - MP3 Playback
45 ENGLISH MP3 Playback Symptoms • “NO DISC” appears on the display. • “RESET 8” appears on the display. • “RESET 1” – “RESET 7” appears on the display. • Disc cannot be played back. • Files skip, or 00’00” appears and playback stops. • Noise is generated. • A longer readout time is required (“FILE ...
Page 46 - Handling discs; How to handle discs; To keep discs clean; Moisture condensation; MAINTENANCE
46 ENGLISH When playing a CD-R or CD-RW You can play back your original CD-Rs or CD-RWsrecorded in audio CD format or in MP3 format.(However, they may not be played back dependingon their characteristics or recording conditions.)• User-edited CD-Rs (Recordable) and CD-RWs (Rewritable), where audio C...
Page 47 - AUDIO AMPLIFIER SECTION; SPECIFICATIONS; CD PLAYER SECTION
47 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than0.8 % total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more...
Page 48 - Having TROUBLE with operation?; Refer to page of How to Reset; USA ONLY; Visit us on-line for; US RESIDENTS ONLY
EN, SP, FR 0102MNMMDTJEIN J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! http://www. jvc m o bi le .c o m Visit us on-line for Technical...
Page 49 - LOCALIZACION DE AVERIAS
KD-SH909KD-SH707 Installation/Connection ManualManual de instalación/conexiónManuel d’installation/raccordement E S PA Ñ O L • Esta unidad está diseñada para funcionar con 12 V de CC, consistemas eléctricos de masa NEGATIVA. INSTALACION (MONTAJE EN ELTABLERO DE INSTRUMENTOS) • La siguiente ilustraci...
Page 50 - RACCORDEMENTS ELECTRIQUES; • S’assurer de raccorder la mise à la masse de cet appareil au; CONEXIONES ELECTRICAS; sistemas eléctricos de masa NEGATIVA; ELECTRICAL CONNECTIONS
2 • When installing the unit without using the sleeve• Instalación de la unidad sin utilizar la cubierta• Lors de l’installation de l’appareil sans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place. En un Toyota por ejemplo, primero extraiga la...
Page 51 - ESPAÑOL
3 L R +- +- + - + - A Typical Connections / Conexiones típicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully notto fail in connecting this unit. Incorrect connection may cause aserious damage to this unit.The leads of the power cord and those of the connector ...
Page 52 - External component / Componente exterior / Appareil extérieur; External component
4 R L L L R R Usted podrá conectar un subwoofer a través de un amplificadorpara reforzar los graves. • Con respecto a sus conexiones, refiérase a las instruccionessuministradas con sus subwoofer. Vous pouvez connecter un caisson de grave par un amplificateur pourrenforcer les graves.• Pour la connex...
Page 53 - démonstration des affichages
1 2 3 4 ENGLISH When shipped from the factory, displaydemonstration has been activated, and star tsautomatically when no operations are doneand no sound comes in for about 3 minutes. To cancel the display demonstration,follow the procedure below. 1 Press and hold SEL (select) for morethan 2 seconds ...
