JVC HR-P110AS - Manual

5 Wireless remote control Wireless remote control When using the remote control for operation of the video cassette player, make sure that it is pointed at the remote sensor window.You can also use the player’s remote control to operate a JVC television. A Transmitting window B 1 button To turn the ...

6 On screen display On screen display When “O.S.D” is set to “ON” (See “Mode set” 墌 pg. 9), various operational indicators appear on the TV screen. A Operation mode indicators B Tape speed SP/LP/EP C Colour system indicator D Tape direction E Counter display F Tape position indicator G Cassette load...

7 Connections Connection A (basic) In order to use the video cassette player it must be connected between the antenna and the TV. A Connect your TV antenna cable to the video cassette player’s ANT. IN terminal. B Connect one end of the provided RF antenna cable to the video cassette player’s RF. OUT...

8 Setting the video channel Setting the video channel To watch videos on your TV, it must be set to the same UHF channel as the video cassetteplayer. This channel is used as the video channel.This video cassette player has been preset to UHF channel 36. NOTE: When you have connected the VIDEO/AUDIO ...

9 Mode set Mode set You can change various mode setting on the Mode Set screen by following procedure described below. A Access the Mode Set screen. Press MENU . B Select the mode. Press R / T to move the pointer to the item you want to change. C Select the mode setting. Press Y / U . D Return to th...

10 Setting Of The Colour System Select Buttons Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing the COLOUR SYSTEM displays the current setting on the screen. While the current setting is displayed, press COLOUR SYSTEM a...

11 Playback Playback NTSC, PAL and MESECAM video tapescan be played back on this video cassetteplayer. See “Setting Of The Colour System Select Buttons” on page 10 for details.Before proceeding: ● Turn on the power of the TV and video cassette player. ● Make sure that the TV is set to the video chan...

12 Playback Shuttle search playback Use this feature during playback to visually locate any point on a recorded cassette. The sound will be cut during shuttle search operation. During playback: A Press Á or 1 to engage shuttle search forward or reverse. 8 Press Á to 1 again to perform high speed. NO...

13 Recording Recording Use the following procedure to record TV programmes on a blank video tape. Before proceeding : ● To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the “Connections” on page 6 section. ● Turn on the power of the TV and vi...

14 Editing NOTES: ● The B.E.S.T. system works only after a tape has been inserted and the Record mode is first initiated. It does not work during recording. ● Once the cassette is ejected, the B.E.S.T. data is cancelled.The next time the cassette is used for recording, B.E.S.T. is re-performed. Play...

15 Troubleshooting Troubleshooting About Head cleaning 8 If the picture playback becomes blurred, it does not mean that the recorded program has been erased. 8 Dirt accumulated on the video heads after long periods of use causes such troubles. In this case, head cleaning requiring highly technical c...

16 Specifications Specifications Format........................................ VHS Standard Video recording system .............. Rotary, slant azimuth helical scan system Rotary heads .............................. 2 video heads RF output ................................... System B/G, D/K type mo...