JVC BR-DV3000U - Manual - manualsarea.com

Page 2 - Supplement; Port

2 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth...

Page 3 - Caution for AC Mains Lead; SAFETY PRECAUTIONS; CAUTION; ATTENTION; INFORMATION; CAUTION

E-3 SAFETY PRECAUTIONS IMPORTANT (In the United Kingdom) Mains Supply (AC 230 V ` ` ` ` ` ) WARNING – THIS APPARATUS MUST BE EARTHED The wires in this mains lead are coloured inaccordance with the following code; GREEN-and-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the...

Page 4 - Thank you for purchasing our DV; MAIN FEATURES; TABLE OF CONTENTS

4 Thank you for purchasing our DV Video Cassette Recorder BR-DV3000. As this is a DV-format video cassette recorder,video cassettes with the or logos can be used with it.DVCAM cassettes can be recorded in DV for-mat. This VTR features dual support for NTSC and PAL.Certain functions however, are supp...

Page 5 - Daily maintenance and regular inspection; Usage Time; Head cleaning; INTRODUCTION; Precautions; Place of storage and use

7 Daily maintenance and regular inspection This unit uses consumables or components that will wear off. If a worn-out or deteriorated componentcontinues to be used, it may cause the unit to break down. To prevent this, please perform daily mainte-nance using the head-cleaning tape. With the head-cle...

Page 6 - Precautions on the use of cleaning tape; Cassette tape; Erasure prevention; Mini DV cassettes; Memo; Condensation

8 INTRODUCTION Precautions on the use of cleaning tape Please use cleaning tape produced by JVC. Please follow the instructions below when usingthe cleaning tape. 1. The tape will run for 10 seconds in the PLAYmode. (Thereafter, it stops automatically andenters the STOP mode.) • After loading the cl...

Page 7 - Front panel

11 Mini PROFESSIONAL SET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL. REMOTE SEL. MIC SERIAL WIRELESS 9PIN LINE DV Y/C 5 6 7 5 [ R E M OT E S E L . ] R e m o t e s e l e c tswitch Use this switch to select the remote controllertype. ...

Page 8 - Indicator; DVCAM; Audio indicator

12 NAMES AND FUNCTIONSOF VARIOUS PARTS – Front panel – (continued) 8 [REC] Record button/LED ● Hold down this button and press the 9 PLAY button to start recording. During recording, theLED lights up red. ● Hold down this button and press the 0 PAUSE button to pause the recording. ● When this button...

Page 9 - Rear panel; NTSC; PAL

15 DV IN/OUT AUDIO VIDEO LINE Y/C CH 1/3 CH 2/4 IN OUT REMOTE SERIAL 9PIN NTSC/PAL NTSC PAL DC12V ! 6 5 8 7 9 0 5 [VIDEO Y/C IN] Video Y/C inputterminal (4P) This is the input terminal for YC separate video signals. ● To input video signals from this terminal,set the [INPUT SEL.] switch on the front...

Page 10 - Wireless remote controller

16 NAMES AND FUNCTIONSOF VARIOUS PARTS – Wireless remote controller – DISPLAY BARS MENU SEARCH+ SEARCH– A.DUB F.REV INDEX– INDEX+ PLAY STOP REMOTE CONTROL UNIT RM-G3000 REW FF PAUSE SET BLANK STILL MODE AUDIO MUTING OUT SEL. OUT LEV. REC F.ADV 1 6 7 8 @# % 2 3 9 0!$ ^ 4 5 SET BUTTON & 1 OPERATE ...

Page 11 - Status display; It displays the current settings and operating status.; Regarding on-screen display; Main unit

19 ON-SCREEN DISPLAY – Status display – 䡵 Status display: It displays the current settings and operating status. 3 2 K C H – 1 / 2 S P 0 0 0 m i n 0 4 / 0 1 / 0 2 S T A N D B Y - O F F 1 1 : 2 0 : 0 0 T C R 0 2 : 0 0 : 0 0 : 0 0 1 2 No. Item Content 1 Sampling frequency/audiooutput CH • Sampling fre...

Page 12 - Item; Event display

20 ON-SCREEN DISPLAY – Status display – (continued) No. Item Content 3 Time code • It displays the time codes (hour, minute, second and frame). During playback, the time codes recorded on the tape aredisplayed. TCR : time code reader data TCG : time code generator data DTCG : time code data input fr...

Page 13 - : When anomalies occur in the VTR, warning messages with error; Warning display; Alarm display; : Alarm messages are displayed as shown below, when an operation; Display at position A; : Displays which show the state of the unit (and which are not set; Display at position B; : Messages indicating operation errors are displayed for about 3

23 Display Contents COPY INHIBIT REC INHIBIT A. DUB INHIBIT(REC TAB) A. DUB INHIBIT(48K) A. DUB INHIBIT(LP) A. DUB INHIBIT(BLANK) A. DUB INHIBIT(DV) A. DUB INHIBIT(NTSC/PAL) A. DUB INHIBIT(DVCAM) OPERATIONLOCK The user attempts to record signals protected with the copy guard. The user attempts to re...

Page 14 - LOADING THE BATTERIES; Guide on battery replacement.; Precautions on the use of battery; Note; E model only; USING THE WIRELESS REMOTE CONTROLLER; Operable scope of the wireless remote controller; Sensor for the wireless remote controller; Notes

24 PREPARATION – Provided wireless remote controller – LOADING THE BATTERIES Before using the wireless remote controller, please load 2 batteries (AA) in. 1 Lift up the coverof the batterycompartment. 2 Load in 2 batteries(AA). • Please insert the · pole in first. 3 Close the cover. Battery compartm...

Page 15 - Switching on the power; Turning off the power; PREPARATION; Power; Connect the provided AC adapter to the main unit.; Connecting to the AC adapter

27 Switching on the power Mini PROFESSIONAL REC PLAY REW STO DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL. REMOTE SEL. MIC SERIAL WIRELESS 9PIN LINE DV Y/C OPERATE indicator OPERATE button DISPLAY BARS MENU SEARCH+ SEARCH– A.DUB F.REV INDEX– INDEX+ PLAY STOP REMOTE CONTROL...

Page 16 - Selecting the NTSC/PAL signal system; STEPS; OPERATION LOCK mode; To set the unit to the OPERATION LOCK mode:; To turn off the OPERATION LOCK mode:

28 PREPARATION – Selecting the NTSC/PAL signal system – This unit supports both the NTSC and PAL signal system.Before inputting analogue signals (composite or YC separate video signals), please select thesignal system. Mini PROFESSIONAL REC PLAY REW STOP DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV30...

Page 17 - Setting/displaying date and time; Setting the date and time; controller or the unit.; Loading/ejecting cassettes; Please use standard DV cassettes or mini DV cassettes.; Loading the cassette; Ejecting the cassette

31 PREPARATION – Setting/displaying date and time – This function sets up the date and time data of the built-in clock. With the built-in chargeablebattery, the configured date and time data is maintained even after the main power is turnedoff. The data will be displayed on the monitor according to ...

Page 18 - Set the date or time on the CLOCK ADJUST menu.; To return to the usual menu, do the following:; SELECTING DATE/TIME DISPLAY; SETTING

32 PREPARATION – Setting/displaying date and time – (continued) SET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 5. EJECT button 3. – 13 , 4. PLAY button 3. – 13 , 4. STOP button 3. – 2 , 4. REW button 3. – 4 , 4. PAUSE button 3. – 2 FF button DISPLAY BARS M...

Page 19 - Setting; Selecting the video input signal; AUDIO MODE; Setting the SYSTEM menu (; LONG PAUSE TIME; Setting the time code recording during DV signal input; RECORDING; Connection; When connected to a video device equipped with a DV terminal; Recorder

35 Setting Mini PROFESSIONAL SET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL. REMOTE SEL. MIC SERIAL WIRELESS 9PIN LINE DV Y/C NTSC indicator PAL indicator INPUT SEL switch DIO VIDEO LINE Y/C CH 2/4 IN OUT REMOTE SERIAL 9PIN NTSC/PAL...

Page 20 - Setting time codes; Time code recording; Recording time codes of a DV input terminal:; set the TC DUPLICATE setting to NON DROP.

36 RECORDING – Setting time codes – This unit has a built-in time code reader/ generator. It records time codes during recording. Itdoes not record the user’s bit.Time codes are recorded according to the recording condition as follows:Time codes are recorded in the REC RUN mode. (REC RUN: time codes...

Page 21 - Audio dubbing; Press the PLAY button to play the tape.; Recording method; Recording index signals

39 RECORDING – Audio dubbing – For tapes recorded in the 32kHz audio mode, audio dubbing can be performed on the CH3 andCH4 channel after the recording. (After-recording) Notes • For tapes recorded in the 48kHz audio mode, audio dubbing cannot be performed.• Audio dubbing cannot be performed for DV ...

Page 22 - Backup recording function; Backup unit: the main unit; CTL; ON; AUTO IRIS; Recording begins on the source unit.; Recording using the serial remote terminal

40 RECORDING – Backup recording function – By linking this unit to other DV devices, this unit can perform continuous, long-hour recording.This unit can be set as a backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/DV5000, etc.). When the recording tape of the source unit ends, this unit...

Page 23 - REMOTE SEL. switch on the front panel; SYSTEM menu; PLAYBACK; Using this unit as a standalone device

43 Setting 䡵 REMOTE SEL. switch on the front panel To use the wireless remote controller, set the switch to WIRELESS. 䡵 SYSTEM menu • STL/F.ADV MODE Use this to select the image type for still image playback or frameadvance playback.(Field image, 1st field image, 2nd field image and frame image) Not...

Page 24 - Use the remote controller.; FIELD; Operation

44 PLAYBACK – Basic playback method – Mini PROFESSIONAL SET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL. REMOTE SEL. MIC SERIAL WIRELESS 9PIN LINE DV Y/C PAUSEbutton STOP button PLAY button REW button DV CAM indicator FFbutton A.DUB ...

Page 25 - Index search; Blank search; In the STOP mode, press the BLANK button.; Variable speed playback; Set the unit to the search mode.; Set the unit to the PLAYBACK or the STILL mode.; Changing the speed of fast-forward playback or re-; During normal playback or forward search:; Changing the direction of playback

47 PLAYBACK – Locate function – Index search This function locates and advances/rewinds to the position where the index signal is recorded.Use the remote controller. 䡵 To locate an index in the forward direction vis-a-vis thecurrent tape position: • Press the INDEX + button. The index position to be...

Page 26 - OFF; Press the PLAY button to begin replay.; Repeat operation; To turn the audio muting function ON/; Select the output level for audio play-

48 PLAYBACK – Repeat playback – This unit is capable of 3 types of repeat playback.The repeat playback function is set via the REPEAT MODE item of the SYSTEM (1/2) menu. TAPE END VIDEO END Playback INDEX Rewind Index signal Beginning of tape End of tape Index signal – – – S Y S T E M [ 1 / 2 ] – – –...

Page 27 - Setting the TC ADJUST item of the TIME CODE menu; Applicable model; EDIT; Example of connection

51 • REM STOP SEL: Use this menu item to set the operation mode upon reception of astandby-on signal. EE : EE mode (STOP mode) PB : PLAYBACK mode (STILL mode) • PB START DELAY: Use this menu item to set the edit timing. If delay occurs at thestart of editing, correct this time discrepancy by adjusti...

Page 28 - Using the unit in a non-linear system; Using the unit in an editing system; Setting this unit; The REMOTE SEL switch on the front; MENU SCREEN; Hierarchical menus are displayed on the monitor.

52 Using the unit in a non-linear system This is a system that captures the content of the source tape on a non-linear editing systemand records the non-linear edited contents onto the main unit. EDIT – Using the unit in an editing system – (continued) Connection DV IN/OUT AUDIO VIDEO LINE Y/C CH 1/...

Page 30 - Contents of the menus; In the menu descriptions below, settings with “

56 MENU SCREEN – Contents of the menus – In the menu descriptions below, settings with “ 䢇 ” marks are factory settings. TOP MENU Items Setting Contents SYSTEM REMOTE AUDIO/VIDEO TIME CODE DISPLAY CLOCK ADJUST FACTORYSETTING DRUM HOURMETER EXIT 䢇 CANCELEXECUTE Displays the menus related to the opera...

Page 31 - REMOTE menu; SYSTEM Menu

59 REMOTE menu The REMOTE menu consists of 2 menus. (1/2 and 2/2 menu) REMOTE (1/2) menu Items Setting Contents REMOTE LOCALFUNCTION PREROLL REM FF/REWMODE OFF ON NO KEYEJECTSTP + EJT ALL KEYS 3SEC5SEC 7SEC10SE FF/REWSEARCH Use this menu item to enable/disable the REMOTE SEL. switch onthe front pane...

Page 33 - DISPLAY menu; TIME CODE menu

63 DISPLAY menu The DISPLAY menu consists of 2 menus (1/2 and 2/2 menu) DISPLAY (1/2) menu Items Setting Contents DISPLAY COUNTER POSI. TIME CODE VTR MODE TAPE REMAIN TIME/DATE OFF ONAUTO LOWER-RLOWER-LUPPER-RUPPER-LCENTER OFF ON OFF ON OFF ON OFFTIMEDATE DATE +TM Use this menu item to choose whethe...

Page 35 - Warning display (Displayed regardless of the DISPLAY mode); OTHERS; Alarm display (Displayed regardless of the DISPLAY mode)

67 CONDENSATIONON DRUM WARNING 3200LOADING FAILURE WARNING 3300LOADING FAILURE WARNING 4100CASSETTEEJECT FAILURE DEFECTIVETAPE!5605 - 5609 WARNING 5702TAPE END DET.ERROR! WARNING 5802TAPE BEGINDET. ERROR! WARNING 7001DRUM MOTORFAILURE WARNING 7101CAP MOTORFAILURE WARNING7202 -7203SUPPLY REELFAILURE ...

Page 36 - Troubleshooting; Checking the hour meter; Page 7; To set the unit to the STOP mode:; To return to the usual screen:

68 OTHERS – Troubleshooting – Symptom Action The power does not come on. The cassette cannot be loaded. Unable to record. The operation buttons of the mainunit do not work. The 9 PIN REMOTE or SERIAL RE-MOTE cannot be engaged with theREMOTE SEL switch. Noise appears on the playbackscreen.Playback au...

Page 37 - Specification; Recording system

71 OTHERS – Specification – (continued) Diagram of external dimension (Unit: mm) 68 174 260 Mini PROFESSIONAL SET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL. REMOTE SEL. MIC SERIAL WIRELESS 9PIN LINE DV Y/C 70 OTHERS – Specification...

JVC BR-DV3000U - Manual

Table of Contents:

Summary

Other JVC Models