JVC AV-21Y214 - Manual

4 Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2 . To exit the MENU, press theDISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5 / ∞ buttons 3 to choose a menu title. Press ∞ but...

5 TV buttons and functions The following illustrations are for AV-21Y214 and AV-16N214, which are used forexplanation purpose. Your TV may not look exactly like the illustrated. Front of the TV AV-21Y214 AV-16N214 Rear of the TV AV-21Y214 AV-16N214 No. Button/terminal Description 1 I (main power) Pr...

6 Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder. Once installed, it cannot be removed. If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack ...

7 Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV byfollowing the steps as below: 7 • Press the red button to cancel the SETUP TOUR RESTART function.If you want to make initial settings againwhen th...

8 Basic setting for picture COLOUR SYSTEM You can select the appropriate colour systemwhen the picture is not clear or no colourappears. Press the COLOUR SYSTEM button to select asetting. AUTO PAL SECAM NTSC3.58 NTSC4.43 To operate this function with a menu: ❇ MENU PICTURE PICTURE FEATURES COLOUR SY...

9 Advance setting for picture BLUE BACK You can set the TV to automatically change to ablue screen and mute the sound if the signal isweak or absent, or when there is no input froman antenna.Select the BLUE BACK in the INSTALL menu,then choose ON or OFF. ❇ MENU INSTALL BLUE BACK If you wish to conti...

10 Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels byusing the colour buttons (red, green, yellow,blue). 1 In TV mode, select a TV channel (PR 01-99)you desired to register. 2 Press and hold a colour button for 3seconds or more.“FAV...

11 Customized setting VNR You can reduce the noise.Select the VNR in the PICTURE FEATURES menuunder PICTURE menu, then choose a setting ofVNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. ...

12 TV channel presetting To register the TV channels auto-matically You can register the TV channels into the TV’schannel list automatically. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press theMENU/OK button.AUTO PROGRAM function starts, and thechannels received are regi...

13 TV channel presetting To add in the new channel(INSERT in the EDIT menu) You can add in the new channel in the TVchannel list as you like.You need to find the “CH/CC” number for the TVchannel. Find the “CH/CC” number correspond-ing to the channel number of the TV channelfrom the attached sheet “C...

14 Additional preparation The illustrations shown in this section are for AV-16N214 only, which are used for explanation purpose.Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices ...

15 Specifications MODEL AV-21Y214 AV-16N214 AV-17V214 TV RF systems B/G, I, D/K, M Colour systems RF MODE PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz VIDEO MODE PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and frequencies VHF low channel (VL) = 46.25 to 168.25 MHzVHF high channel (VH) = 175.25 to 4...

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV.2 Avoid damaging th...

3 Knowing your TV’s features 2 1 3 4 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. Themodel number is indicated at the rear of your TV. Wh...

4 Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+ Adjust the volume level. 6 T...

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual,location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. To Display the MENU Display the topmenu Display the 2ndmenu Dis...

7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCRand the aerial jack on the TV with the aerial cable. Then connect theoutput jacks of your VCR and the VIDEO-1 input jacks of the TVwith the video cable (or S-VIDEO cable if available) and audiocables. Fo...

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following setps as below: • Press 5 / ∞ button to select your desiredlanguage, then pressMENU/OK button. • TV will start searching for the channels. To stop AUTOPROGRAM, p...

10 Adjusting the picture – USER You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker...

11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness ofyour room.Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. To operate this function with a menu: You can display the graphic of AI ECO SENSO...

12 SOUND SYSTEM You can select an appropriate sound system when abnormalsound occurs even when the picture appears normally.Press the SOUND SYSTEM button to select a setting. This function is not available in video mode.For the sound system in each country or region, see the table below: Basic setti...

13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect...

14 To register the favorite channel You can register and recall 4 favorite channels by using thecolour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more.“FAVORITE CHANNEL ■ PROGRAMMED!” appe...

15 VNR You can reduce the noise.Select the VNR in the PICTURE FEATURES menu underPICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select...

17 To register the TV channels automatically You can register the TV channels into the TV’s channel listautomatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button.AUTO PROGRAM function starts, and the channels receivedare registered in the channel list (PR list) ...

19 TV channel presetting (continued) CH/CC number When you want to use the INSERTfunction on page 18, find the CH/CCnumber corresponding to the channelnumber of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia,etc.. OIRT Easter...

20 V L R V L R /MONO OUTPUT VIDEO-1 INPUT V L R R L/MONO Y C B C R /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT BASS SPEAKER OUT . The illustrations shown in this section are for AV-29V334 and AV-21C314 only, which are used for explanation purpose. Your TVmay not look exactly...

21 VIDEO -1 INPUT OUTPUT COMPONENT (VIDEO-2) INPUT BASS SPEAKER OUT R C R V MONO L / V Y / V L MONO L / C B S OVER R R Twin PortBass BlasterUnit Additional preparation (continued) Attaching the Twin Port Bass Blaster Unit <AV-29J334/AV-29V334/AV-25V334/AV-21V334 only> The Twin Port Bass Blaste...

23 Design and specifications subject to change without notice. Specifications Model AV-29V334 AV-29J334 AV-29V314 AV-25V334 AV-25V314 TV RF system B/G, I, D/K, M Colour system PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and Frequencies VHF low channel (VL) : 46.25 to 168.25 MHzVHF high channel ...