JVC AV-1407AE - Manual - manualsarea.com

Page 2 - Safety Instructions; WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS; Operate only from the power source indicated on the rear of the TV.; Knowing your TV’s features; Main features; Function

2 Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the p...

Page 3 - Remote control buttons and basic functions; WITH THE TELETEXT FUNCTION; To

3 3 2 8 6 7 9 5 1 4 0 1 9 2375 0 4 6 8 Remote control buttons and basic functions RM-C1260 WITH THE TELETEXT FUNCTION (AV-21F24) RM-C1261 WITHOUT THE TELETEXT FUNCTION (AV-1407AE/AV-1407FE/AV-21L14/AV-2105WE/AV-2105YE/AV-2107CE/AV-2107TE/AV-2107WE/AV-2107YE) No. Press To 1 POWER Turn on or off the T...

Page 4 - Remote control buttons and basic functions (continued); How to operate menus and menu locations; Some functions have the 4th menus as the sub-menus.

4 Remote control buttons and basic functions (continued) How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2 . To exit the MENU, press theDISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5 / ∞ buttons 3 to choose a menu title....

Page 5 - TV buttons and functions; Front of the TV

5 TV buttons and functions The following illustrations are for AV-1407FE and AV-1407AE only, which are used forexplanation purpose. Your TV may not look exactly like the illustrated. Front of the TV AV-1407FE AV-1407AE Rear of the TV AV-1407FE AV-1407AE OK MENU CHANNEL VOLUME VIDEO AUDIO IN (VIDEO-2...

Page 6 - Setting up your TV; CAUTION; Connecting the compatible main plug

6 Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder. Once installed, it cannot be removed. VIDEO AUDIO VIDEO -1 INPUT OUTPUT If you connect a VCR, connect the aerial output jac...

Page 7 - Making the initial settings; • If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO; РУССКИЙ

7 Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV byfollowing the steps as below: 7 • Press the red button to cancel the SETUP TOUR RESTART function.If you want to make initial settings againwhen th...

Page 8 - Basic setting for picture; COLOUR SYSTEM; To operate this function with a menu:; PICTURE MODE; Adjusting the picture - USER; *TINT can only be adjusted in NTSC system.; WHITE BALANCE

8 Basic setting for picture COLOUR SYSTEM You can select the appropriate colour systemwhen the picture is not clear or no colourappears. Press the COLOUR SYSTEM button to select asetting. In TV mode: AUTO PAL SECAM In VIDEO mode: AUTO PAL SECAM NTSC3.58 NTSC4.43 To operate this function with a menu:...

Page 9 - Advance setting for picture; BLUE BACK; Original features for picture; TELETEXT; Press the TEXT button to select the; TV mode; Using the List mode; TEXT LANGUAGE

9 Advance setting for picture BLUE BACK You can set the TV to automatically change to ablue screen and mute the sound if the signal isweak or absent, or when there is no input froman antenna.Select the BLUE BACK in the INSTALL menu,then choose ON or OFF. Original features for picture TELETEXT (AV-21...

Page 10 - SOUND SYSTEM; AI VOLUME

10 Basic setting for sound Advanced setting for sound SOUND SYSTEM You can select an appropriate sound system whenabnormal sound occurs even when the pictureappears normally.Press the SOUND SYSTEM button to select asetting. B/G I D/K The function is not available in video mode.For the sound system i...

Page 11 - Favorite channel and video setting; To register the favorite channel; FAVORITE CHANNEL

11 Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels byusing the colour buttons (red, green, yellow,blue). 1 In TV mode, select a TV channel (PR01- 99)you desired to register. 2 Press and hold a colour button for 3seconds or more.“FAV...

Page 12 - Customized setting

12 Customized setting VNR You can reduce the picture noise.Select the VNR in the PICTURE FEATURES menuunder PICTURE menu, then choose a setting ofVNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum...

Page 13 - TV channel presetting; You can edit the TV channel list as you like.

13 TV channel presetting To register the TV channels auto-matically You can register the TV channels into the TV’schannel list automatically. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press theMENU/OK button.AUTO PROGRAM function starts, and thechannels received are regi...

Page 14 - Channel

14 TV channel presetting (continued) To add in the new channel(INSERT in the EDIT menu) You can add in the new channel in the TVchannel list as you like.You need to find the “CH/CC” number for the TVchannel. Find the “CH/CC” number correspond-ing to the channel number of the TV channelfrom the attac...

Page 15 - Additional preparation; Before connecting; Troubleshooting

15 Additional preparation The illustrations shown in this section are for AV-1407FE only, which are used for explanation purpose.Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices ...

Page 16 - Specifications

TV RF systems B/G, I, D/K Colour systems TV mode: PAL, SECAMVIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz...

JVC AV-1407AE - Manual

Table of Contents:

Summary

Other JVC CRT TVs Models