Page 2 - CAUTION; POWER Button
2 This lightning flash with arrowhead symbol withinan equilateral triangle is intended to alert the userto the presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of sufficient magnitude to constitute a risk of electricshock to persons. The exclamation mark within an ...
Page 3 - Contents
3 Contents Introduction . . . . . . . . . . . . . . . . . . .4 Symbol Used in this Manual . . . . . . . . . . . . . . .4About the Symbol Display . . . . . . . . . . . . . .4 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4 Handling Discs . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - Handling Discs; DivX; Introduction; Selecting the Viewing Source; • If you want to view DVD deck output source:
4 To ensure proper use of this product, please read thisowner’s manual carefully and retain for future reference. This manual provides information on the operationand maintenance of your DVD player. Should the unitrequire service, contact an authorized service location. Symbol Used in this Manual Th...
Page 5 - Types of Playable Discs; • Depending on the conditions of the recording; Notes on DVDs and Video CDs; • Most DVD discs have a globe with one or more
5 Introduction Types of Playable Discs DVD(8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW thatcontains audio titles, MP3 or JPEG files. This indicates a product featur...
Page 7 - Remote Sensor
7 Introduction Display Window Front Panel DVD VCRREC TV [P] VCR deck is selected. DVD deck is selected. Indicates repeat mode. Indicates TV mode. (See Notes on page 23.) Indicates total playing time/elapsed time/current time A disc is loaded in the DVD deck. (Lights when a disc is loaded in the DVD ...
Page 8 - Remote control battery installation; and; Remote Control; Shows you the current time or
Remote Control Operation Point the remote control at the remote sensor andpress the buttons. Do not mix old and new batteries and nevermix different types of batteries such as stan-dard, alkaline, etc. Remote control battery installation Detach the battery cover on the rearof the remote control, and...
Page 9 - AERIAL
Introduction Do not touch the inner pins of the jacks on the rear panel. Electrostaticdischarge may cause permanent damage to the unit. Rear Panel 9 DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT) Connect to an amplifier,...
Page 10 - Installation and Setup; Tips
Installation and Setup Tips : Depending on your TV and other equipment thereare various ways you can connect the player. Please refer to the manuals of your TV, VCR,stereo system or other devices as necessary foradditional connection information. Notes: The picture and sound of a nearby TV, VCR, or ...
Page 11 - Connecting to Optional Equipment; II; Connect this unit’s DIGITAL AUDIO OUT jack; Digital Multi-channel sound; Rear of this unit
Installation and Setup Connecting to Optional Equipment Connecting to an amplifier equipped with twochannel analog stereo or Dolby Pro Logic II /Pro Logic Connect the Left and Right AUDIO OUT jacks on thisunit to the audio left and right in jacks on your amplifi-er, receiver or stereo system, using ...
Page 12 - Before Operation-VCR part
12 Before Operation-VCR part Tuning in a video channel on yourTV Notes: The output frequency of this DVD+VCR is set atUHF channel 36. If channel 36 is already used byanother TV station, or if the picture is distorted, youcan change the transmitter channel of yourDVD+VCR. Stages 5 ~ 8 will show you h...
Page 13 - Setting the clock Manually; To set the colour system
Installation and Setup 13 Setting the clock Manually The clock in your VCR controls time and datesettings for your VCR.The clock is set automatically during ACMS (Automatic Channel Memory System) when yourVCR detects a channel that broadcasts aTeletext signal. If the broadcast signal is weakthe cloc...
Page 14 - How to using the main menu
14 How to using the main menu This DVD+VCR can easily be programmed byusing the menus displayed on screen.The menus are controlled from the RemoteControl Handset. 1. Switch on your TV set and video recorder by pressing the 1 1/ /+ button. 2. Press i button. The main menu will appear on the TV screen...
Page 15 - Tuning in TV Stations Manually
Installation and Setup 15 Tuning in TV Stations Manually In certain areas of the country broadcast signalsmay be too weak for your DVD+VCR’s automatictuning process to find or assign TV stations correctly.You must tune in these weaker broadcast stationsmanually in order for your DVD+VCR to storethem...
Page 17 - Playback Status/Restrictions; Before Operation-DVD part
17 On-Screen Display You can display the general playback status on the TVscreen. Some items can be changed using the menu.To use the on-screen display: 1. Press DISPLAY during playback. 2. Press v / V to select an item. The selected item is highlighted. 3. Press b / B to change the setting. You can...
Page 18 - Initial Settings; General Operation; DVD
18 Initial Settings By using the Setup menu, you can make variousadjustments to items such as picture and sound. Youcan also set a language for the subtitles and theSetup menu, among other things. For details on eachSetup menu item, see pages 18 to 21. To display and exit the Menu: Press SETUP MENU ...
Page 19 - TV Aspect; Vocal
19 Installation and Setup DISPLAY TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspectmode is set to “4:3”. LetterBox: Displays a wide picture with bands on the upper and lower port...
Page 20 - PBC
20 OTHERS The PBC, Auto Play and DivX(R) VOD settings can bechanged. PBC Set Playback Control (PBC) to On or Off. On : Video CDs with PBC are played according to the PBC. Off : Video CDs with PBC are played the same way as Audio CDs. Auto Play You can set up the DVD Player so a DVD disc auto-matical...
Page 21 - Rating; If you forget your Security Code; Area Code
21 Installation and Setup LOCK (Parental Control) Rating Some movies contain scenes that may not be suitablefor children to view. Many of these discs containparental control information that applies to the complete disc or to certain scenes on the disc. Moviesand scenes are rated from 1 to 8, depend...
Page 22 - Operation; Playing a tape; The image may be distorted during special playback
22 Operation Playing a tape You will only be able to load and eject video cassetteswhen your DVD+VCR is plugged into the mains. Your DVD+VCR may also playback recordings fromNTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, theautomatic tracking funct...
Page 23 - Instant Timer Recording; start recording; programme number
23 Operation Instant Timer Recording Your DVD+VCR allows you to make recordingsusing a variety of simple methods: Instant Timer Recording start recording immediately for a set period of time or until thevideo cassette runs out. Your DVD+VCR incorporates Long Play (LP)which enables you to record up t...
Page 24 - VIDEO Plus+ Programming; numbered buttons; PlusCode
24 VIDEO Plus+ Programming VIDEO Plus+ greatly simplifies entering the date,channel, start and end times of a Timer Recordingby simply entering VIDEO Plus+ Code. VIDEOPlus+ Codes are published in most TV guide mag-azines; they can vary one to nine numbers inlength. 1. Make sure that TV channels have...
Page 27 - Playing a DVD or Video CD; Playback Setup; b B v V; General Features; Moving to another TITLE
27 Playing a DVD or Video CD Playback Setup 1. Turn on the TV and select the video input source connected to the DVD player. 2. Turn on the audio system (if applicable) and select the input source connected to the DVD player. 3. Press OPEN/CLOSE ( ) to open the disc tray and load your chosen disc in...
Page 29 - b B v V; Special DVD Features; B v V
29 Operation Zoom Use zoom to enlarge the video image. 1. Press ZOOM during playback or still playback to activate the Zoom function. The square frameappears briefly in the right bottom of the picture. 2. Each press of the ZOOM button changes the TV screen in the sequence: 100% size → 400% size → 16...
Page 30 - Playing an Audio CD or MP3 Disc; Audio CD
30 Playing an Audio CD or MP3 Disc The DVD player can play MP3 formatted recordings on CD-ROM, CD-R, or CD-RW discs. Audio CD Once you insert an audio CD a menu appears on theTV screen. Press v / V to select a track then press N or ENTER and playback starts. MP3 1. Press v / V to select a folder, an...
Page 31 - Pause
31 Operation Audio CD and MP3 DiscFeatures Pause 1. Press X during playback. 2. To return to playback, press N , ENTER or press X again. Moving to another Track 1. Press . or > briefly during playback to go to the next track or to return to the beginning of thecurrent track. 2. Press . twice brie...
Page 32 - Programmed Playback; Audio CD or MP3 Discs:; If you press; Erasing a Track from Program List; The complete Program for the disc will be erased.
32 Programmed Playback The program function enables you to store yourfavorite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert a disc. Audio CD or MP3 Discs: AUDIO CD or MUSIC menu appears. 2. Press MNL.PROG.. The mark will appear to the right of the word “Progra...
Page 33 - Viewing a JPEG Disc; v V b B; • There are three Slide Speed options; JPEG
33 Operation Preview List JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8 >>> PHOTO Viewing a JPEG Disc Using this DVD Player you can view discs with JPEGfiles. 1. Insert a disc and close the tray. The PHOTO menu appears on the...
Page 34 - Playing a DVD VR format Disc; • This unit will play DVD-RW discs recorded using; • Unfinalized DVD-R/RW discs cannot be played in this; Maintenance and Service; Handling the Unit; When shipping the unit
34 Playing a DVD VR format Disc This unit will play DVD-R/RW discs recorded usingthe DVD-Video format that have been finalized usinga DVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the T...
Page 35 - Playing a DivX Movie Disc; • Press DISC MENU to move to the next page.
35 Operation Playing a DivX Movie Disc Using this DVD Player you can play DivX disc. 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in afile list and want to return to...
Page 37 - Hi-Fi Stereo Sound System
37 Operation Hi-Fi Stereo Sound System Your VCR will record and playback Hi-Fi stereosound. In addition it has a stereo NICAM digital stereosound decoder. This allows you to record and playbackthe sound in several different ways. Video cassettesrecorded on your VCR will have a normal mono audiotrack...
Page 38 - VCD
38 Additional Features Last Scene Memory This player memorizes last scene from the last discthat is viewed. The last scene remains in memoryeven if you remove the disc from the player or switchoff the player. If you load a disc that has the scenememorized, the scene is automatically recalled. Note: ...
Page 39 - Reference; Area Codes; Choose a area code from this list.; Language Codes
Reference 39 Reference Area Code Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET F...
Page 40 - Troubleshooting
40 Check the following guide for the possible cause of a problem before contacting service. Symptom DVD or VCR do notwork properly. No power. The power is on, butthe DVD player doesnot work. No picture. No sound. The picture is poor. The DVD player doesnot start playback. The remote controldoes not ...
Page 41 - General; Specification
title 41 Reference “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. General Power requirements AC 200-240V, 50 Hz Power consumption 17W Dimensions (app...
Page 42 - Some Do's And Don'ts On The Safe Use Of Equipment; If in doubt — consult a competent electrician.; Precautions
42 When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventila-tion (10 cm or more on both sides, on top and at the rear).When discarding batteries, environmental problems must be considered and the local rules or laws governing t...
