Page 2 - Warnings, Cautions and Others; Information for Users on Disposal of Old Equipment
G-1 Warnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home orthe cable is too short to reach a power point, then obtain anappropriate safety approved extension lead or consult yourde...
Page 3 - Regulatory information
G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage.Locate the apparatus as follows:Front: No obstructions open spacing. Sides: No obstructions in 15 cm from the sides. Top: No obstructions in 15 cm from the top. Back: No obstructions in 15 cm from the...
Page 5 - Introduction; Features
1 Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Features Hybrid Feedback Digital Amplifier RX-D...
Page 6 - Table of Contents
2 Table of Contents Parts identification ................................................ 3Getting started ...................................................... 6 Before Installation .................................................................. 6Checking the supplied accessories .................
Page 7 - Remote control; Parts identification
3 A/V CONTROL RECEIVER REMOTE CONTROL RM - SRXD701R TV/VIDEO AUDIO TV STB DVR/DVD FM/AM AUX VCR TV STB CONT DVR/DVD USB VIDEO VCR TV VOL CHANNEL VOLUME FM MODE MUTING MEMORY TUNING/REW FF/TUNING SETTING DVD MENU DECODE MODE MIDNIGHT D.EQ FREQ D.EQ LEVEL C.TONE SMART S.SETUP TEST SLEEP L – FRONT – R ...
Page 8 - Front panel; Inside the front door; How to open the front door
4 Front panel 1 STANDBY/ON button and standby lamp (19) 2 CC CONVERTER button (22) 3 SETTING button (25, 27) 4 ADJUST button (34, 36) 5 SURROUND button (50) 6 HDMI lamp (10, 11, 13, 14, 20) 7 Source lamps (19)DVR/DVD, VCR, VIDEO, TV, USB, FM/AM, AUX 8 • SET button (25, 28, 34, 36)• TUNER PRESET butt...
Page 9 - Rear panel; Display window
5 1 Power cord (16) 2 COMPONENT VIDEO (Y, P B , P R ) jacks (10, 11, 13, 14) VIDEO(VCR) IN, DVR/DVD IN, MONITOR OUT 3 HDMI terminals (10, 11, 13, 14)VIDEO(VCR) IN, DVR/DVD IN, MONITOR OUT 4 DIGITAL IN terminals (16)• Coaxial: 1(DVR/DVD)• Optical: 2(VIDEO)• Optical: 3(TV) 5 DIGITAL OUT terminal (16) ...
Page 10 - Putting batteries in the remote control; Getting started; Before Installation; General precautions; Checking the supplied accessories; Remote sensor
6 Putting batteries in the remote control Before using the remote control, put two supplied batteries first. 1 Press and slide the battery cover on the backof the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover. If the range or effe...
Page 11 - FM antenna connection
7 ANTENNA COAXIAL FM 75 AM EXT AM LOOP ANTENNA Snap the tabs on theloop into the slots ofthe base to assemblethe AM (MW) loopantenna. Connecting the FM and AM (MW) antennas Do not connect the AC power plug to the wall outlet until all connections are completed. AM (MW) loop antenna(supplied) If AM (...
Page 12 - Speaker Layout Diagram; Connecting the speakers; Turn the knob counterclockwise.; Connecting the powered subwoofer
8 FL FR SL SR SBL C SW SBR (*SB) SUBWOOFER OUT LEFT RIGHT LEFT RIGHT LEFT RIGHT CAUTION:SPEAKER IMPEDANCE 6 -16 FRONT SPEAKERS CENTER SPEAKER SURROUND BACK SPEAKERS SURROUND SPEAKERS Connecting the speakers Do not connect the AC power plug to the wall outlet until all connections are completed. Spea...
Page 13 - Before connecting video components; Connecting video components; Video conversion function
9 Before connecting video components About HDMI IMPORTANT: The HDMI video signals from the HDMI terminal are transmitted only through the HDMI MONITOR OUT terminal. Therefore, if the TV is connected to the receiver through the AV IN/OUT terminal (TV) or COMPONENT VIDEO jacks (MONITOR OUT)and a playi...
Page 15 - Connecting a DVD recorder or DVD player:
11 VIDEO IN DVR/DVD IN FRONT L R AUDIO ) IN DVR/DVD IN HDMI DVR/DVD Å ı Y P B P R COMPONENT VIDEO MONITOR OUT DVR/DVD IN VIDEO(VCR) IN Ç Î 7 Connecting a DVD recorder or DVD player: HDMI cable (not supplied) SCART cable (not supplied) Green Blue Red Component video cable (not supplied) Stereo audio ...
Page 18 - Connecting another video component to the VIDEO IN jacks:
14 Y P B P R COMPONENT VIDEO MONITOR OUT DVR/DVD IN VIDEO(VCR) IN Î VIDEO IN VIDEO S-VIDEO VIDEO VIDEO IN DVR/DVD IN FRONT L R AUDIO ‰ Ç ı Å VIDEO(VCR) IN HDMI Do not connect the AC power plug to the wall outlet until all connections are completed. 7 Connecting another video component to the VIDEO I...
Page 19 - Connecting a video component to the AUX input jacks:
15 DIGITAL S-VIDEO VIDEO L – AUDIO – R AUX ı Ç Å Î 7 Connecting a video component to the AUX input jacks: The AUX input jacks on the front panel (inside the front door) are convenient when connecting and disconnecting the componentfrequently.Before making connections, press PUSH-OPEN to show the jac...
Page 20 - Digital audio connection; Connecting the power cord; Digital output terminal
16 DIGITAL IN 2(VIDEO) 1(DVR/DVD) 3(TV) DIGITAL OUT PCM/STREAM NOTES • When shipped from the factory, the DIGITAL IN terminals on the rear of the receiver have been set for use with the followingcomponents:– 1(DVR/DVD): For DVD recorder or DVD player – 2(VIDEO): For the component connected to the VI...
Page 21 - For USB TERMINAL; USB connection; For USB WIRELESS; CONTINUED ON THE NEXT PAGE
17 4 Turn on the receiver, then slide the USB WIRELESSswitch on the rear to “ID LEARNING,” and select thesource as “USB WIRELESS.” When you slide the switch, the lamp in the switch startsflashing. 5 Set the volume to minimum. IMPORTANT: Always set volume to “0” when connecting or disconnecting theot...
Page 23 - Basic operations; Select the source to play; From the remote control:; Source lamps; Turn on the power; Press; Current source name appears.
19 Basic operations 2 Select the source to play On the front panel: Turn SOURCE SELECTOR until the source nameyou want appears on the display. The source lamp corresponding to the selected source lights inred.• As you turn SOURCE SELECTOR, the source changes as follows: DVR/DVD: Select this for the ...
Page 24 - Adjust the volume; Selecting the video input setting; Selecting the audio input setting; From the remote control ONLY:
20 * When “TV” is selected as the source, only “DIGITAL” or “ANALOGUE” appears on the display as the audio inputsetting. NOTES • “HDMI” is available only for the source with “HDMI” selected in the video input setting (see the left column). • “DIGITAL” is available for the source assigned for “DIGITA...
Page 25 - Listening with headphones; Selecting the digital decode mode; Turning off the sounds temporarily; Changing the display brightness; DGTL AUTO
21 Listening with headphones You can enjoy not only stereo software but also multi-channelsoftware through the headphones. (Sounds are down-mixed to thefront channels while playing multi-channel software.) Connect a pair of headphones to the PHONES jack on thefront panel to activate the HEADPHONE mo...
Page 26 - Basic adjustment of auto memory; Signal and speaker indicators on the display; Signal indicators; SLEEP indicator; Making sounds natural; Press CC CONVERTER repeatedly.
22 Basic adjustment of auto memory This receiver memorizes sound settings for each source:• when you turn off the power, and• when you change the source. When you change the source, the memorized settings for thenewly selected source are automatically recalled.The following can be stored for each so...
Page 27 - Basic settings
23 To obtain the best possible sound effect from Surround/DSPmodes (see pages 46 to 50), you need to set up the speaker andsubwoofer information after all the connections are completed.From pages 23 to 33, how to set speakers and other basic itemsof the receiver are explained. Setting the speaker in...
Page 28 - FL
24 When your clapping sound is detected successfully • On the TV screen, “SUCCESSFUL,” “RESULT,” and the setting values appear. The setting values are shown for about 10seconds. Ex.: • On the display, “SUCCESSFUL” appears, then the setting values are shown as follows for about 10 seconds: Ex.: *8 St...
Page 29 - Basic setting items; Menu operation buttons
25 Basic setting items You can adjust the following items. See pages in parentheses fordetails.• You cannot select the items which is not available with the current setting. For example, when “S BACK SPK” is set to “SBACK SPK: NO,” you cannot select the following items:S BACK OUT, SB SPK DIST., SBL ...
Page 30 - Press SET; Setup menu configuration
26 SETTING MENU (5) SURROUND BACK SPEAKER SURROUND SPEAKER CENTER SPEAKER FRONT SPEAKER FR SPK DISTANCE SURROUND BACK OUT FL SPK DISTANCE SETTING MENU (1) 5 SUBWOOFER : NO FRONT SPK : LARGE CENTER SPK : SMALL SURR SPK : SMALL S BACK SPK : SMALL S BACK OUT : 2SPK ∞ :ENTER :EXIT SETTING MENU (2) 5 DIS...
Page 31 - Menu operating procedure; To select the desired submenu, press; Usable buttons and their functions; Button indications on the screen
27 Menu operating procedure When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 33). Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. In ...
Page 32 - Setting the items; Setting the speakers; Setting subwoofer information—SUBWOOFER
28 3 Press SET. 4 To select the appropriate setting, press 2 or 3 repeatedly, then press SET. The on-screen display returns to the previousSETTING MENU. In this example, “SETTING MENU(4)” appears on the TV screen and “DIGITAL IN 1”appears on the display. • On the front panel, turn MULTI JOG, then pr...
Page 33 - —S BACK OUT; Setting the speaker distance
29 In this case, set the distance as follows:Left front speaker (FL): “FL SPK DIST.: 3.0m (10ft)” Right front speaker (FR): “FR SPK DIST.: 3.0m (10ft)” Center speaker (C): “C SPK DIST.: 3.0m (10ft)” Left surround speaker (SL): “SL SPK DIST.: 2.7m (9ft)” Right surround speaker (SR): “SR SPK DIST.: 2....
Page 34 - Setting bass sound; Setting subwoofer output—SUBWFR OUT
30 Selecting the main or sub channel—DUAL MONO You can select the playback sound (channel) you want whileplaying digital software recorded (or broadcasted) in Dual Monomode (see page 47), which includes two monaural channelsseparately. When the receiver detects Dual mono signals, theDUAL MONO indica...
Page 35 - Setting the crossover frequency—CROSSOVER; Setting the low frequency effect attenuator; Using the Midnight mode—MIDNIGHT
31 You can enjoy a powerful sound at night using the Midnight mode.When the Midnight mode is activated, the MIDNIGHT indicatorlights up on the display. MIDNIGHT: OFF Select when you want to enjoy surroundwith its full dynamic range. (No effectapplied.) MIDNIGHT: 1 Select when you want to reduce thed...
Page 38 - Sound adjustments; Basic adjustment items
34 Sound adjustments You can make sound adjustment to your preference aftercompleting basic setting. Basic adjustment items You can adjust the following items. See pages in parentheses fordetails.• You cannot select the items which is not available with the current setting. • The name of the item sh...
Page 41 - Adjusting the items; Adjusting the speaker output levels; SBR
37 From the remote control: 1 Press TEST to check the speakers’ output balance. • On the TV screen, “TEST TONE” appears. The indicator corresponding to the speaker appears while a test tonecomes out of the speakers. EX.: • On the display, “TEST L” star ts flashing, and a test tone comes out of the s...
Page 42 - Adjusting the bass sounds
38 7 Attenuating the input signal—INPUT ATT When the input level of analogue source is too high, the sound will be distorted. If this happens, you need to attenuate the inputsignal level to prevent the sound distortion.• Once you have made an adjustment, it is memorized for each source. • You cannot...
Page 44 - Tuner operations; Tuning in to stations manually; Using preset tuning; To store the preset stations
40 Tuner operations Tuning in to stations manually From the remote control ONLY: 1 Press FM/AM to select the band. The last received station of the selected band is tuned in.• Each time you press the button, the band alternates between “FM” and “AM.” 2 Press repeatedly or hold TUNING 9 or ( TUNING u...
Page 45 - To tune in a preset station; Selecting the FM reception mode
41 3 Press the numeric buttons (1 – 10, +10) toselect a channel number while the channelnumber position is flashing. • For channel number 5, press 5.• For channel number 15, press +10, then 5.• For channel number 30, press +10, +10, then 10. 4 Press MEMORY again while the selectedchannel number is f...
Page 46 - What information can RDS signals provide?; Press DISPLAY while listening to an FM station.; RDS indicator; PS
42 With the receiver, you can receive the following types of RDSsignals: PS (Program Service): Shows commonly known stationnames. PTY (Program Type): Shows types of broadcastprograms. RT (Radio Text): Shows text messages the stationsends. Enhanced Other Networks: See page 45. NOTES • RDS is not avai...
Page 47 - While “PTY SELECT” is flashing, press PTY
43 PTY codes Searching for a program by PTYcodes One of the advantages of the RDS service is that you can locate aparticular kind of program from the preset channels (see pages40 and 41) by specifying the PTY codes. To search for a program using the PTY codes Before you start, remember... There is a...
Page 48 - Description of the PTY codes:
44 Description of the PTY codes: News: News. Affairs: Topical program expanding or enlarging upon thenews—debate or analysis. Info (Information): Programs the purpose of which is to impart advice in the widest sense. Sport: Programs concerned with any aspect of sports. Educate (Education): Education...
Page 49 - NEWS
45 Switching to broadcast program ofyour choice temporarily Another convenient RDS service is called “Enhanced OtherNetworks.”This allows the receiver to switch temporarily to a broadcastprogram of your choice (TA, NEWS, and/or INFO) from a differentstation except in the following case:• The Enhance...
Page 50 - Dolby Digital EX; Dolby Surround; Dolby Pro Logic II; LS
46 Creating realisticsound fields Reproducing theatre ambience In a movie theatre, many speakers are located on the walls toreproduce impressive multi-channel sound, reaching you from alldirections.With these many speakers, sound localization and soundmovement can be expressed.Surround/DSP modes bui...
Page 51 - About other digital signals; Dolby Pro Logic IIx; DTS; DTS Digital Surround
47 DTS Neo:6 DTS Neo:6 is another conversion method to create 6-channel (plus subwoofer) from analogue/digital 2-channel software byusing the high precision digital matrix decoder used for DTS-ESMatrix 6.1ch.• This receiver provides the following DTS Neo:6 modes— Neo:6 Cinema (NEO:6 CINEMA) and Neo:...
Page 52 - Introducing the DSP modes; Early reflections; MONO FILM
48 Introducing the DSP modes The sound heard in a concert hall, club, etc. consists of directsound and indirect sound—early reflections and reflections frombehind. Direct sounds reach the listener directly without anyreflection. On the other hand, indirect sounds are delayed by thedistances of the c...
Page 53 - Using the Surround/DSP modes; Virtual Surround Back
49 Using the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround channels. For e...
Page 54 - Select and play any source.; When you select “AUTO SURROUND”; Activating the Surround/DSP modes; Selecting the Surround/DSP modes
50 On the front panel: Before you start, remember... There is a time limit in doing the following steps. If the setting iscanceled before you finish, start from step 2 again. 1 Select and play any source. • Surround/DSP modes are not available when selecting “A MULTI” in the audio input setting (see...
Page 56 - Set the mode selector to “DVR.”; DVD recorder or DVD player
52 1 2 3 4 5 6 7 8 9 10 0 10 You can always perform the following operation: DVR/DVD : Turn on or off the DVD recorder or DVDplayer. After pressing DVR/DVD, you can perform the following operationson the DVD recorder and DVD player. 3 : Start playback. 7 : Stop playback. 8 : Pause playback. To relea...
Page 57 - Try to operate your TV by pressing TV; Manufacturers’ codes for TV; Manufacturer
53 By changing the transmittable signals, you can use thesupplied remote control to operate other manufacturers’products. • Refer also to the manuals supplied with the other products.• To operate those components with the remote control, first you need to set the manufacturers’ codes each for the TV...
Page 58 - Try to operate your VCR by pressing VCR; Manufacturers’ codes for VCR
54 ❏ Changing the transmittable signals for operatinga VCR 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer’s code using buttons1 – 9, and 0. See “Manufacturers’ codes for VCR” on the right. 4 Release VCR . Now, you can perform the following operation on the VCR. VCR : Turn on or off the...
Page 60 - Troubleshooting
56 Troubleshooting Use this chart to help you solve daily operational problems. Ifthere are any problems you cannot solve, contact your JVC’sservice center. PROBLEM The power does not come on. The receiver turns off (enters standbymode). “OVER HEAT” flashes on the display,then the receiver turns off...
Page 62 - Amplifier; Output Power; Specifications; Video; General
58 Designs and specifications are subject to change withoutnotice. Amplifier Output Power At stereo operation: Front channels: 130 W per channel, min. RMS, driven into6 Ω at 1 kHz with no more than 0.8% total harmonic distortion. (IEC268-3/DIN) At surround operation: Front channels: 130 W per channe...
Page 63 - AUDIO / VIDEO CONTROL RECEIVER
1105RYMMDWJEIN EN © 2005 Victor Company of Japan, Limited AUDIO / VIDEO CONTROL RECEIVER RX-D701S / RX-D702B cover_RX-D701S[B]_f.p65 05.11.7, 2:54 PM 2
