Juniper Networks M120 - Manual

FPCs and cFPCs Supported M120 routers support the FPCs listed in Table 2 on page 6. Table 2: FPCs Supported by the M120 Router First JUNOSRelease Maximum Throughputper FPC Maximum Numberof PICs Supportedper FPC FPC Model Number FPC Name FPC Type 8.0R2 4 Gbps 4 M120-FPC1 FPC1 1 8.0R2 10 Gbps 4 M120-F...

Table 4: Optical Interface Support for 10-Gigabit Ethernet cFPC (continued) 10-GBASE-Z 10-GBASE-E 10-GBASE-L 10-GBASE-S Parameter 9/125 SMF cable:49.6 miles/80 km 9/125 SMF cable:24.8 miles/40 km:Distances greater than30 km are consideredto be engineeredlinks. 9/125 SMF cable:6.2 miles/10 km 50/125 ...

PIC/FPC Compatibility Table 6 on page 9 provides a PIC/FPC compatibility matrix for the supported PICs for the M120 router. Table 6: M120 PIC/FPC Compatibility FPC3 FPC2 FPC1 PIC Model Number Number of Ports PIC Type ATM2 IQ PICs – – 8.0R2 PB-4DS3-ATM2 4 ATM2 DS3 IQ – – 8.0R2 PB-4E3-ATM2 4 ATM2 E3 I...

Adaptive Services II PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Supports tunnel services. This feature is included with the PIC and does not require anindividual license. ■ Individual licenses must be purchased for additional servi...

Adaptive Services II FIPS PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ JUNOS-FIPS requires an Adaptive Services II FIPS PIC for external IPSec connections. Seethe Secure Configuration Guide for Common Criteria and JUNOS-FIPS for more...

Adaptive Services II Layer 2 Services PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Supports Layer 2 Service package only. Tunnel services are included with the PIC. Otherservices require an individual license. ■ Power requirement: 0....

Table 8: Adaptive Services PICs Software Features Adaptive ServicesII Layer 2 ServicesPIC Adaptive Services IIPIC Software Feature – – GRE Key – – GRE dont-fragment – 8.0R2 Stateful firewall with packet inspection: detectsSYN attacks, ICMP and UDP floods, andping-of-death attacks – 8.0R2 Network Add...

ATM2 DS3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.41 A @ 48 V (20.0 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ ATM standards compliant Descrip...

ATM2 E3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four E3 ports ■ Power requirement: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ ATM standards compliant Description ...

■ Circuit cross-connect (CCC) for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indicator(RDI) cells, and loop...

Table 9: Optical Interface Support for ATM2 OC3 IQ PICs (continued) Multimode Intermediate Reach (IR) Parameter Multivendor agreement Telcordia GR-253 Standard 1.2 miles/2 km 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1260 through 1360 nm Transmitterwavelength –20 through –14 dBm –15 thro...

■ Circuit cross-connect for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indication(RDI), and loop cells ■ Po...

Table 10: Optical Interface Support for ATM2 OC12/STM4 IQ PICs (continued) Multimode Transceiver Intermediate Reach (IR) Transceiver Parameter Multivendor agreement Telcordia GR-253 Standard 546.8 yards/500 m 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Transmitter wave...

■ Multiprotocol Label Switching (MPLS) circuit cross-connect for leveraging ATM accessnetworks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect ...

Table 11: Optical Interface Support for ATM2 IQ OC48 PICs (continued) Single-Mode Intermediate Reach PIC Type Telcordia GR-253 Standard 9.3 miles/15 km Maximum distance 1274 through 1356 nm Transmitterwavelength –15 through –8 dBm Average launch power –8 dBm Receiver saturation –28 dBm Receiver sens...

Channelized DS3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.32 A @ 48 V (15.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: DS3, DS0 ...

Channelized E1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Ten E1 ports ■ Power requirement: 0.15 A @ 48 V (7.2 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: E1, DS0 Desc...

■ 120-ohm RJ-48C Cables and connectors One bicolor per E1 port: ■ Off—Port not enabled ■ Green—Physical E1 link is up; individual subchannels can be down ■ Red—Physical E1 link is down LEDs ■ Alarm indication signal (AIS) ■ Loss of frame (LOF) ■ Out of frame (OOF) ■ Failed signal rate (FSR) Alarms, ...

Channelized OC3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC3 port ■ Power requirement: 0.39 A @ 48 V (8.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: DS3, DS1, D...

■ Quality of Service (QoS) per channel: weighted round-Robin (WRR), random early drop(RED), weighted random early drop (WRED) ■ Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB ■ Dynamic, arbitrary channel configuration ■ Full Bit Error Rate Testing (BERT) ■ Encapsulations: ■ High...

Table 12: Optical Interface Support for Channelized OC3 IQ PICs (continued) Intermediate Reach (IR) PIC Type –15 through –8 dBm Average launch power –8 dBm Receiver saturation –28 dBm Receiver sensitivity Channelized OC3 IQ PIC ■ 39 Channelized OC3 IQ PIC

Channelized OC12 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC12 port ■ Power requirement: 0.23 A @ 48 V (10.8 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: OC3, DS3,...

Table 13: Optical Interface Support for Channelized OC12 IQ PICs (continued) Intermediate Reach (IR) Parameter Telcordia GR-253 Standard 9.3 miles/15 km Maximum distance 1274 through 1356 nm Transmitter wavelength –15 through –8 dBm Average launch power –8 dBm Receiver saturation –28 dBm Receiver se...

Channelized STM1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One STM1 port ■ Power requirement: 0.39 A @ 48 V (18.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: STM1c, fr...

Channelized T1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Ten T1 ports ■ Power requirement: 0.15 A @ 48 V (7.2 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: T1, FT1, N x...

DS3 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.47 A @ 48 V (22.5 W) ■ Integrated DSU interoperability with leading DSU vendors Description ■ High-performance throughput on each port at speeds u...

E1 PICs Left: E1 RJ-48 PIC; Right: E1 Coaxial PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ Four E1 or coaxial ports ■ Power requirement: 0.08 A @ 48 V (3.74 W) ■ Two versions: ■ 4-port, 120-ohm, RJ-48 ■ 4-port, 75-ohm, coaxial ■ O...

EIA-530 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Two EIA-530, X.21 or V.35 serial ports ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ Configured as data terminal equipment (DTE) ports ■ Resynchronization signal ■ Recei...

Fast Ethernet PICs Left: 4-Port Fast Ethernet PIC; Right: 8-Port Fast Ethernet PIC Left: 12-Port Fast Ethernet PIC; Right: 48-Port Fast Ethernet PIC 56 ■ Fast Ethernet PICs M120 Internet Router PIC Guide

48-port PIC—does not have port LEDs. To check port status on a 48-port PIC, use the show interfaces fe- fpc / pic / port command. For more information about this command, see the JUNOS Network Interfaces Configuration Guide . Table 14: Optical Interface Support for Fast Ethernet PICs FX Interface fo...

Gigabit Ethernet PICs with SFP Left: 1-Port Gigabit Ethernet PIC; Right: 2-Port Gigabit Ethernet PIC Left: 4-Port Gigabit Ethernet PIC; Right: 10-Port Gigabit Ethernet PIC 60 ■ Gigabit Ethernet PICs with SFP M120 Internet Router PIC Guide

Software release ■ 1-port: JUNOS 8.0R2 and later (Type 1) ■ 2-port: JUNOS 8.0R2 and later (Type 2) ■ 4-port: JUNOS 8.0R2 and later (Type 2) ■ 10-port: JUNOS 8.0R2 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. ■ One, two, four, or ten Gigabit Ethernet ports ■ Power req...

Gigabit Ethernet IQ PICs with SFP Left: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC ■ 1-port: JUNOS 8.0R2 and later (Type 1) ■ 2-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ One or two Gigabit Ethernet po...

Gigabit Ethernet IQ2 PICs with SFP Left: 4-port Gigabit Ethernet IQ2 PIC (Type 1); Right: 8-port Gigabit Ethernet IQ2 PIC (Type 2) 66 ■ Gigabit Ethernet IQ2 PICs with SFP M120 Internet Router PIC Guide

g002378 Center: 8-port Gigabit Ethernet IQ2 PIC (Type 3) ■ 4-port: JUNOS 8.0R2 and later (Type 1) ■ 8-port: JUNOS 8.0R2 and later (Type 2) ■ 8-port: JUNOS 8.5 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ Four or eight Gigabit Ethernet ports ■ Power...

10-Gigabit Ethernet IQ2 PIC with XFP ■ JUNOS 8.2 and later (Type 3) Software release ■ One 10-Gigabit Ethernet port ■ Power requirements: 1.2 A @48 V (56 W) Description ■ High-performance throughput ■ WAN-PHY mode at 9.953 Gbps ■ LAN-PHY mode at 10.3125 Gbps ■ Full-duplex mode ■ Large maximum transm...

Table 18: Optical Interface for 10-Gigabit Ethernet IQ2 PICs 10-GBase-Z 10-GBase-E 10-GBase-L 10-GBase-S Parameter XFP-10G-Z-OC192-LR2 XFP-10G-E-OC192-IR2 XFP-10G-L-OC192-SR1 XFP-10G-S Transceiver modelnumber Single-mode Single-mode Single-mode Multimode Optical interface XFP XFP XFP XFP Transceiver...

10-Gigabit Ethernet PIC with XENPAK ■ 10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3) ■ XENPAK-OTN transceivers: JUNOS 9.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 ...

Table 19: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK (continued) Extra-LongWavelength Serial(10GBase-ZR), LANRate Extra-Long WavelengthSerial (10GBase-ER),LAN Rate Long WavelengthSerial (10GBase-LR),LAN Rate Short WavelengthSerial (10GBase-SR),LAN Rate Parameter –24.0 through...

Table 20: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK-OTNs (continued) ■ Transmitter type: Electro-absorption Modulated Laser (EML) ■ Modulation format: Non-retum-to-zero (NRZ) ■ Channel-plan wavelength range: 1551.72 through 1542.94 nm ■ Channel-plan frequency range: 193.2 th...

10-Gigabit Ethernet DWDM PIC ■ JUNOS 8.0R2 and later (Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 W) ■ Supports large Ethernet frame sizes for more efficient throughput across the intra-POPne...

■ Enhanced optical monitoring capabilities ■ CLI configurable wavelength support ■ Virtual Router Redundancy Protocol (VRRP) support ■ 802.1q virtual LANs (VLANs) support ■ 802.3ae link aggregation support ■ RMON EtherStats Software features ■ Duplex SC/PC connector (RX and TX) Cables and connectors...

MultiServices PICs Left: MultiServices 100 PIC; Right: MultiServices 400 PIC Center: MultiServices 500 PIC Software release 80 ■ MultiServices PICs M120 Internet Router PIC Guide

■ Duplex SC/PC connector (Rx and Tx) ■ Optical interface support—See Table 25 on page 85 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device. Forinformation about taking a PI...

■ SONET alarms: ■ Alarm indication signal—line (AIS-L) ■ Alarm indication signal—path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Los...

SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP POR T3 Left: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1); Right: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 2) ■ 4-port: JUNOS 8.4 and later (Type 1) ■ 4-port: JUNOS 8.3 and later (Type 2) Software release ■ Rate-selectable using one of the following rat...

Table 28: Optical Interface Support for SONET/SDH OC12c/STM4 PICs Multimode Intermediate Reach Parameter Multimode Single-mode Optical interface Fixed Fixed Transceiver type Multivendor agreement Telcordia GR-253 Standard MMF cable: 546.8 yards/500 m SMF cable: 9.3 miles/15 km Maximum distance 1270 ...

■ SONET alarms: ■ Alarm indication signal—line (AIS-L) ■ Alarm indication signal—path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Los...

Tunnel Services PIC ■ JUNOS 8.0R2 and later (Type 1, Type 2, and Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ Loopback function that encapsulates and de-encapsulates packets ■ OC12/STM4 tunneling bandwidth o...

Appendix A High Availability Features High availability features include Routing Engine redundancy, graceful Routing Engineswitchover (GRES), nonstop bridging, nonstop active routing, graceful restart forrouting protocols, Virtual Router Redundancy Protocol (VRRP), and unified in-servicesoftware upg...