Johnson Controls IFC-640 - Manual
Johnson Controls IFC-640 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Sample
- Page 3 – Field Programming Options; VeriFire ToolsSystem Programming screen
- Page 6 – System Modules; OTHER OPTION MODULES
- Page 7 – LDM Series: Remote custom graphic driver modules.; COMPATIBLE INTELLIGENT DEVICES; M300DJ: FlashScan® dual monitor module.; OTHER OPTIONS
- Page 9 – System Capacity; Specifications; • City of Chicago; Standards; SYSTEM SPECIFICATIONS
JCI-6856:A • 12/01/06 — Page 1 of 9
IFC-640
Intelligent Addressable
Fire Alarm System
JCI-6856:A
IFC-640 shown in CAB-4 with
JNCA 640-character display
General
As a stand-alone small-to-large system, or as a large network,
the IFC-640 meets virtually every application requirement.
Designed with modularity and for ease of system planning, the
IFC-640 can be configured with just a few devices for small
building applications, or for a large campus or high-rise applica-
tion. Simply add additional peripheral equipment to suit the
application.
Features
•
One, expandable to two, isolated intelligent Signaling Line
Circuit (SLC) Style 4, 6 or 7.
•
Up to 159 detectors (any mix of ion, photo, thermal, or multi-
sensor) and 159 modules (N.O. manual stations, two-wire
smoke, notification, or relay) per SLC. 318 devices per loop/
636 per FACP or network node.
•
Standard 80-character display, 640-character large display,
or display-less (a node on a network).
•
Network option – 103 nodes supported (IFC-640, JNCA Net-
work Annunciator, or IFW Network Control Station).
•
6.0 amp switch mode power supply with four Class A/B built-
in Notification Appliance Circuits (NAC). Selectable System
Sensor strobe synchronization.
•
Built-in Alarm, Trouble, and Supervisory relays.
•
Up to 64 output circuits per FACP or network node; circuits
configurable online.
•
Autoprogramming and Walk Test reports.
•
Optional universal 636-point DACT.
•
80-character remote annunciators (up to 32).
•
EIA-485 annunciators, including custom graphics.
•
Printer interface (80-column and 40-column printers).
•
History file with 800-event capacity in nonvolatile memory,
plus separate 200-event alarm-only file.
•
Alarm Verification selection per point, with tally.
•
Autoprogramming and Walk Test reports.
•
Positive Alarm Sequence (PAS) Presignal.
•
Silence inhibit and Auto Silence timer options.
•
March time / temporal / California two-stage coding / strobe
synchronization.
•
Field-programmable on panel or on PC
•
Full QWERTY keypad.
•
Charger for up to 90 hours of standby power.
•
Non-alarm points for lower priority functions.
•
Remote ACK/Signal Silence/System Reset/Drill via monitor
modules.
•
Automatic time control functions, with holiday exceptions.
•
Surface Mount Technology (SMT) electronics.
•
Extensive, built-in transient protection.
•
Powerful Boolean logic equations.
JNCA 640-CHARACTER DISPLAY FEATURES:
•
Backlit, 640-character display.
•
Supports SCS Series smoke control system in both HVAC or
FSCS modes .
•
Printer and CRT EIA-232 ports.
•
EIA-485 annunciator and terminal mode ports.
•
Alarm, Trouble, Supervisory, and Security relays.
FLASHSCAN® INTELLIGENT FEATURES:
•
Poll 318 devices in less than two seconds.
•
Activate up to 159 outputs in less than five seconds.
•
Multicolor LEDs blink device address during Walk Test.
•
Fully digital, high-precision protocol (U.S. Patent 5,539,389).
•
Manual sensitivity adjustment — nine levels.
•
Pre-alarm AWACS — nine levels.
•
Day/Night automatic sensitivity adjustment.
•
Sensitivity windows:
– Ion – 0.5 to 2.5%/foot obscuration.
– Photo – 0.5 to 2.35%/foot obscuration.
– Laser (VIEW®) – 0.02 to 2.0%/foot obscuration.
– Acclimate – 0.5 to 4.0%/foot obscuration.
– HARSH™ – 0.5 to 2.35%/foot obscuration.
•
Drift compensation (U.S. Patent 5,764,142).
•
Degraded mode — in the unlikely event that the JCPU-640
microprocessor fails, FlashScan® detectors revert to
degraded operation and can activate the JCPU-640 NAC cir-
cuits and alarm relay. Each of the four built-in panel circuits
includes a Disable/Enable switch for this feature.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 9 — JCI-6856:A • 12/01/06 • Multi-detector algorithm involves nearby detectors in alarmdecision (U.S. Patent 5,627,515). • Automatic detector sensitivity testing. • Maintenance alert (two levels). • Self-optimizing pre-alarm. VIEW® (VERY INTELLIGENT EARLY WARNING)SMOKE DETECTION TECHNOLOGY...
JCI-6856:A • 12/01/06 — Page 3 of 9 FlashScan®Exclusive World-Leading Detector Pro-tocol At the heart of the IFC-640 is a set of detection devices anddevice protocol — FlashScan® (U.S. Patent 5,539,389). Flash-Scan® is an all-digital protocol that gives superior precision andhigh noise immunity. In ...
Page 6 of 9 — JCI-6856:A • 12/01/06 CHS-M2: Mounting chassis for JCPU-640. One required foreach CPU-640/-640E. DP-DISP: Dress panel for top row in cabinet with CPU-640/-640E installed. BMP-1: Blank module for unused module positions. System Modules The IFC-640 includes the ability to communicate wit...
