John Lewis JLWD1404 - Manual

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door locked light It stays on during the whole programme indicating thatthe door is locked.When the light goes out, the door can be opened. Detergent dispe...

1 Detergent dispenser drawer 2 Programme selector dial The programme selector dial is divided into followingsections: • Cottons, • Synthetics, • Delicates • Wool / Hand washing • Special programmes from “ Soak 30° ” to “ 30 Minute wash ” • Reset/Off programme Off The selector dial can be turned eith...

9 • An incorrect option selection has been made : this is indicated by the message Err when a function incompatible with the current programme is selected. • An alarm code indicates a fault in the machine operation (see the relevant chapter). 10 Programme phase indicator lights When you select a pro...

10 Programme information Easy iron 40° With this programme at 40°C it is possible to wash the synthetic garments which must be ironed. Thelaundry is gently washed and spun to prevent thefabrics from creasing. Soak 30° This is a special programme for heavily soiled laundry.The machine performs a soak...

11 Operating Sequence Before the first wash, we recommend that you run a cottoncycle at 60°C, without any laundry in the machine, toremove any manufacturing residue from the drum and tub.Pour 1/2 a measure of detergent into the dispenser drawerand start the machine. WA S H I N G 6 K G O F W H I T E ...

15 Washing and Drying Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 ...

16 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

17 Washing programmes The “ Cottons 60° ” (white and coloured cottons) is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of lau...

19 Drying Programmes (*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, incompliance with EC directive 92/75. Timed drying Degree of drying Store dry (*)Suitable for itemsto put awaywithout ironing Type of fabric Cotton and linen(towels, T-shirts,bath...

20 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laun...

21 Repeat the procedure until water stops flowing out. Unscrew and remove the filter. Clean carefully under a fast running tap. Warning When the appliance is in use and depending on theprogramme selected there can be hot water in thepump. Never remove the pump cover during a washcycle, always wait u...

22 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easilywithout calling out an engineer. Before contacting your local Service Force Centre, please carry outthe checks listed below. IMPORTANT: if you call out an engineer to a fault list...

25 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use incase the machine is to be transported again. Using a spanner unscrew and remove the two rearbottom screws. Slide out the two plastic pins. Lay the machine gen...

27 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, removeany blanking plug that may be in place. Push the drain hose onto the spigot and secure with aclip if required, ensure a loop is formed in the drainhose (see diagram) to prevent waste from the sinkentering the washi...

28 If you require any further advice please contact yourlocal water authority. Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liabil...