John Lewis JLDW 1221 - Manual

Description of the appliance 1. Upper basket2. Water hardness dial3. Salt container4. Detergent dispenser5. Rinse aid dispenser 6. Rating plate7. Filters8. Lower spray arm9. Upper spray arm10. Worktop 6

Control panel Salt Pr ogramme time 45 ° - 70 ° Auto 70 ° Intensive 50 ° Economy 60 ° Quick Rinse hold 55 ° One hour Rinse aid Multi tab Reset Programmes Delay start Energy save Auto off 8 Salt Pr ogramme time 45 ° - 70 ° Auto 70 ° Intensive 50 ° Economy 60 ° Quick Rinse hold 55 ° One hour Rinse aid ...

Dishes can still be wet at the end of theprogramme when you open the appliancedoor. We recommend that you keep thedoor ajar and let the dishes dry.Press this button to switch on the option.The related indicator comes on.This function is available with all the washingprogrammes but has no impact on s...

Switch on the appliance. Theappliance is not in setting mode when: • Only one programme indicator comes on.• The display shows the time of the washing programme or of the delay start. – Cancel the programme or the delay start to go back to the setting mode.Refer to 'Select and start a washingprogram...

Consumption values Programme 1) Energy (kWh) Water (litre) 45° - 70° Auto 0.9 - 1.7 8 - 17 70° Intensive 1.4 - 1.6 15 - 16 60° Quick 0.9 9 50° Economy 1.0 - 1.1 10 - 11 55° One hour 1.0 - 1.2 10 - 11 Rinse hold 0.1 4 1) The display shows the programme duration. The consumption values are intendedas ...

The softener should be adjusted accordingto the hardness of the water in your area.Your local Water Authority can advise youon the hardness of the water in your area. Water hardness Adjustment of the water softener Use of salt Clarke °TH mmol/l manually electronically 64 - 88 91 - 125 9.1 - 12.5 2 l...

Caution! Only use branded rinse aid for dishwashers. Never fill the rinseaid dispenser with any othersubstances (e.g. dishwasher cleaningagent, liquid detergent). This woulddamage the appliance. Rinse aid ensures thorough rinsing,and spot and streak free drying.Rinse aid is automatically addedduring...

For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother- of-pearls handles. • Plastic items that are not heat resistant.• Older cutlery with glued parts that are not temperature resistant. • Bonded cutl...

34 cm 9 x XXL 9 x 34 cm The cutlery basket Warning! Knives with long blades, stored in an upright position, are apotential hazard. Long and/or sharpitems of cutlery such as carving knivesmust be positioned horizontally in theupper basket. Take care whenloading or unloading sharp items suchas knives....

24 cm 28 cm 30 cm 28 cm 25 cm 21 cm 22 cm 34 cm Moving the upper basket to thehigher position 1. Pull out the basket until it stops.2. Carefully lift both sides upwards until the mechanism is engaged and the basket isstable. Moving back the upper basket to thelower position 1. Pull out the basket un...

Fill with detergent 20 30 MA X 1 2 3 4 + - 1. Press the release button ( 2 ) to open the lid ( 3 ) of the detergent dispenser. 2. Put the detergent in compartment ( 1 ). 3. If the washing programme has a prewash phase, put a small quantity of detergenton the inner side of the appliance door. 4. If y...

Unloading the appliance • Hot dishes are sensitive to knocks. The dishes should therefore be allowed tocool down before removing from theappliance. • Empty the lower basket first and then the upper one; this will avoid water drippingfrom the upper basket onto the dishes inthe lower one. • Water may ...

Maintenance and cleaning Cleaning the filters The filters must be checked and cleanedfrom time to time. Dirty filters will degradethe washing result. Warning! Before cleaning the filters ensure that the appliance is switchedoff. 1. Open the appliance door and remove the lower basket. 2. Turn the fil...

9. Put the filter ( A ) into position in filter ( B ). Turn the filter ( A ) clockwise until it locks. Caution! Never use the appliance without filters. Incorrectrepositioning and fitting of the filterswill produce poor washing resultsand will result in damage to theappliance. Spray arms Caution! Ne...

Technical data Dimensions Width 596 mm Height 850 mm Depth 597 mm Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Electrical connection Information on the electrical connection (voltage, overall powerand fuse) is given on the rating plate on the inner edge of theappliance do...

Removing the appliance worktop 1. Remove the appliance worktop by unscrewing the two rear retainingscrews (1) 2. Pull the worktop from the back of the appliance (2). 3. Lift the worktop (3) and slide it out of the front slots. Insert the appliance once the levelling hasbeen done.When inserting the a...

Water connection Water inlet connection This appliance may be fed with either hot(maximum 60 °C) or cold water.Nevertheless we advise you use a coldwater supply. A hot water supply is notalways efficient with heavily soiled crockeryas it shortens the washing programmes a lot.For making the connectio...

Electrical connection The manufacturer accepts no liabilityfor failure to observe the followingsafety precautions. Warning! Safety standards require the appliance to be earthed.Prior to using the appliance for thefirst time, ensure that the ratedvoltage and type of supply on therating plate match th...

Repairs - after sales service Your appliance comes with a three yearwarranty. If it is not working correctly referto "Something not working". If a fault occurswhich you can not resolve through followingthe advice and information contained withinthis instruction manual, the next step is tocon...