JL Audio E6450 - Manual
JL Audio E6450 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLANNING YOUR INSTALLATION; Cooling Efficiency Considerations:; Mounting the amplifier upside down is; Safety Considerations:; I M P O RTA N T; PROTECT YOUR HEARING!; not; JL AUDIO
- Page 4 – AMPLIFIER CONTROLS; INPUT SECTION
- Page 6 – Crossover Setup for Bi-Amplified System; SYSTEM CONFIGURATIONS; Input connection options for a bi-amplified system with
- Page 7 – Precise Frequency Selection Chart; “FILTER FREQ” AMP FILTER; Detent; GENERAL SPECIFICATIONS:; Recommended Fuse Value:; Input Sensitivity Level Setting; not recommended
- Page 8 – “Remote”
- Page 11 – If you need service on your JL AUDIO product:; JL AUDIO with a valid return authorization number.; International Warranties:; by that countr y’s distributor and not by JL Audio, Inc.; Absolute Symmetry
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your
vehicle. For maximum performance and extended warranty
coverage, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to
ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact
your authorized JL Audio dealer for assistance. If you need further
assistance, please call the JL Audio Technical Support Department at
(954) 443-1100 during business hours (Eastern Time Zone).
JL AUDIO
e6450
six-channel full-range amplifier
o w n e r ’ s m a n u a l
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLANNING YOUR INSTALLATION It is impor tant that you take the time to read this manual and that you plan out your installation carefully. The following are some considerations that you must take into account when planning your installation. Cooling Efficiency Considerations: The outer shell of your ...
AMPLIFIER CONTROLS Input Sensitivity These controls, labeled “Input Sens.” ,can be used to match the source unit's output voltage(s) to each input stage of the e6450 for maximum clean output. Rotating an “Input Sens.” control clockwise will result in higher sensitivity (louder for a given input volt...
“CH 2 (Right)” inputs, the second pair of stereo source unit outputs is connected to the “CH 3 (Left)” and “CH 4 (Right)” inputs and the source unit’s dedicated subwoofer output is connected to the “CH 5 (Left)” and “CH 6 (Right)” inputs (select “Discrete” on the “Input Mode” switch in the “Channel ...
